Cambridge Scientific
Used Lab Equipment

Used Lab Equipment

We offer an assortment of refurbished Refrigerated Centrifuges and Non Refrigerated Centrifuges ranging from Microfuge and Tabletop Centrifuges to Floor Model Centrifuges. These come in Low Speed Centrifuges, High / Super speed Centrifuges, and Ultra Centrifuge versions. Some of our leading manufacturers include Beckman, Sorvall and Eppendorf. Additionally, we have many Rotors in stock to fit almost all your needs.

Tube Furnace Oven: 1-15 of 74

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Agilent 1000 Series - G1364A HPLC Fraction Collector

Agilent 1000 Series - G1364A HPLC Fraction Collector

Cambridge ID #: 17472

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1000-Series---G1364A-HPLC-Fraction-Collector-17472
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 1100 Series - G1364A HPLC Fraction Collector

Agilent 1100 Series - G1364A HPLC Fraction Collector

Cambridge Scientific ID #'s: 16335, 16058, 17967

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364A-HPLC-Fraction-Collector-16335
By clicking below we can further assist you with your inquiry. Inquire 3 In Stock Worldwide Shipping
Agilent 1100 Series - G1364C HPLC Fraction Collector

Agilent 1100 Series - G1364C HPLC Fraction Collector

Cambridge Scientific ID #'s: 16028, 16350, 16188, 15885

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364C-HPLC-Fraction-Collector-16028
By clicking below we can further assist you with your inquiry. Inquire 4 In Stock Worldwide Shipping
Agilent 1100 Series - G1364D HPLC Fraction Collector

Agilent 1100 Series - G1364D HPLC Fraction Collector

Cambridge ID #: 17700

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364D-HPLC-Fraction-Collector-17700
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Applied Biosystems StepOnePlus Real-Time qPCR System

Applied Biosystems StepOnePlus Real-Time qPCR System

Cambridge ID #: 17811

Includes Computer loaded w/ Step One Software

 

The StepOnePlus Real-Time PCR System is a 96-well Real-Time PCR instrument perfect for both first-time and experienced users. The StepOnePlus Real-Time PCR System can be setup in a variety of configurations and comes ready to use, out of the box, with intuitive data analysis and instrument control software. Utilizing robust LED based 4-color optical recording, the StepOnePlus Real-Time PCR System is designed to deliver precise, quantitative Real-Time PCR results for a variety of genomic research applications.

Features of the StepOnePlus Real-Time PCR System include:

  • Advanced software and instrumentation for performing a wide array of genomic assays
  • Sensitive 4-color optical LED recording system
  • Intuitive and robust software perfect for both first-time and advanced users
  • Simple and flexible instrument set-up and usage

 

Specifications:

  • Capacity: 1 x 96-well plate, 12 x 8-tube strips, 96 x 0.1 ml tubes
  • Detection Method: Primer-Probe Detection, SYBR
  • Dimensions: 24.6 cm/9.7 in.(W) x 42.7 cm/16.8 in.(D) x 51.2 cm/20.2 in.(H)
  • Dynamic Range: Linear Dynamic Range greater than 9 log units (detection)
  • Format: 0.1 ml tubes, 8-tube strips, 96-well plate
  • Green Features: Energy efficient, Fewer resources used, Sustainable disposal
  • High Throughput Compatibility: Multiplexing
  • Optics: 4 emission filters, Blue LED excitation source, photodiode
  • Passive Reference Dye: No ROX, ROX (Pre-mixed), ROX (Separate Tube)
  • Peak Block Ramp Rate: 4.6°C⁄sec
  • Reaction Speed: Fast, Standard
  • Reaction Volume Range: 10-30 µl (Standard curve experiments: 40 µl in standard mode is validated)
  • Run Time: <2 hrs⁄run (Standard Mode), <40 min⁄run (Fast Mode)
  • Sample Ramp Rate: Fast mode: ± 2.2°C⁄sec, Standard mode: ± 1.6°C⁄sec
  • Temperature Accuracy: 0.25°C (35 to 95°C) of display temperature
  • Temperature Range (Metric): 4-100°C
  • Temperature Uniformity: 0.25°C (35 to 95°C) of setpoint/display temperature
  • Thermal Cycling System: Peltier-Based System
  • Weight: 24 kg (53 lbs.)
Learn More
Applied-Biosystems-StepOnePlus-Real-Time-qPCR-System-17811
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Barnstead Thermolyne Maxi Mix 2 Vortexer

Barnstead Thermolyne Maxi Mix 2 Vortexer

Cambridge ID #: 16916

The Thermolyne Maxi-Mix II vortex mixer with interchangeable mixing surface for cup or flat surface mixing. Large, 31/2" diameter soft rubber pad has firm grip surface that handles multi-tube, small flask, or separatory funnels. Converts easily for conventional single tube mixing by replacing rubber pad with mixing cup (not included). Three-position control switches to off, continuous mixing, or touch-on operations.

Specifications:

  • Maximum Shaking Speed: 3000 rpm
  • Shaking Speed: 100 – 3000 rpm
  • Shipping Weight: 8 lbs
  • Dimensions: 7 x 4.5 x 6 in
  • Power Requirements: 120/240V, 50/60Hz, 0.75/0.3A, 50W
Learn More
Barnstead-Thermolyne-Maxi-Mix-2-Vortexer-16916
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Barnstead Thermolyne Maxi Mix Plus Vortexer

Barnstead Thermolyne Maxi Mix Plus Vortexer

Cambridge ID #: 16915

The Thermolyne Maxi-Mix Plus vortex mixer with interchangeable mixing surface for cup or flat surface mixing. Large, 31/2" diameter soft rubber pad has firm grip surface that handles multi-tube, small flask, or separatory funnels. Converts easily for conventional single tube mixing by replacing rubber pad with mixing cup (not included). Three-position control switches to off, continuous mixing, or touch-on operations.

Specifications:

  • Maximum Shaking Speed: 3000 rpm
  • Shaking Speed: 100 – 3000 rpm
  • Shipping Weight: 8 lbs
  • Dimensions: 7 x 4.5 x 6 in
  • Power Requirements: 120/240V, 50/60Hz, 0.75/0.3A, 50W
Learn More
Barnstead-Thermolyne-Maxi-Mix-Plus-Vortexer-16915
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BD BioScience Accuri C6 Cell Analysis

BD BioScience Accuri C6 Cell Analysis

Cambridge ID #: 18125

Features:

  • BD CSampler- 96 well plate and 24 tube rack automated sampler for BD Accuri C6 flow cytometer  
  • Blue and red laser
  • Two light scatter detectors
  • Optical filters such as FITC, PE, PerCP and APC
  • A compact optical design, fixed alignment, and pre-optimized detector settings make the system easier to use
  • Optional filters and the Selectable Laser Module expand the available fluorochrome combinations
  • Compact system and portable weight (13.6 Kg)
  • Intuitive interface of the software
  • Measures: 11 x 14.75 x 16.5 inches (H x W x D) (27.9 x 37.5 x 41.9 cm)
Learn More
BD-BioScience-Accuri-C6-Cell-Analysis-18125
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BD BioScience FacsAria IIu Cell Sorter

BD BioScience FacsAria IIu Cell Sorter

Cambridge Scientific ID #'s: 14996, 17981

Includes PM From BD and Guaranteed Installable under BD Service Contract

Upgraded to IIu and Added Violet laser in 2014

 

The new BD FACSAria II cell sorter improves ease of use, flexibility, and aseptic capability to make it the best choice for consistent results in sorting across a broad range of applications. The heart of this cell sorting revolution is the true fixed-alignment flow cell, gel-coupled to the collection optics. Fixed alignment minimizes startup time and improves reproducibility. Gel coupling to the objective lens improves collection efficiency and increases the sensitivity and resolution needed for multicolor applications.

 

The BD FACSAria II cell sorter advances cell sorting with multiple improvements. A new fluidics design improves aseptic setup and cleaning. New nozzle sizes enable a wide range of particles to be sorted. Software improvements dramatically cut the time spent on cytometer setup, adjustment, and maintenance.

 

The BD FACSAria II cell sorter also sets a new standard for ease of use to improve both workflow and productivity. A new nozzle design allows for reproducible insertions. A new universal sort tube collection mount makes it easier to insert and remove tube holders. Software wizards and automation simplify aseptic sort setup, drop-delay determination, and clog detection. Compatibility with BD digital analyzers makes it easier to move from analysis to cell sorting.

 

Includes:

  • 3 lasers
  • Blue 7PMTs, Red 3PMTs, Violet 3 PMTs
  • Computer w/ FACSDiva 8 Software
  • ACDU
  • 2 monitors
  • Fluidics Cart
  • Temperature Control
  • Lauda Chiller

 

Performance

Fluorescence Sensitivity

  • Measurements performed at 70 psi and 90 kHz using SPHERO Rainbow Calibration Particles (RCP-30-5A)
  • FITC: 125 molecules of equivalent soluble fluorochrome (MESF-FITC)
  • PE: 125 molecules of equivalent soluble fluorochrome (MESF-PE)

Fluorescence Resolution

  • Coefficient of variation (CV)
  • PI: Area, <3.0%, full G0/G1 peak for propidium iodide (PI)-stained chicken erythrocyte nuclei (CEN)
  • Hoechst: Area, <3.5%, full G0/G1 peak for Hoechst-stained CEN

Fluorescence Linearity

  • Doublet/singlet ratio:
  • CEN stained with PI: 1.95–2.05 (off the 488-nm laser) or Hoechst: 1.95–2.05 (off the 405-nm laser)

Forward and Side Scatter Sensitivity

  • Sensitivity enables separation of fixed platelets from noise, identification of bacteria, and detection of 0.5-micron beads.

Forward and Side Scatter Resolution

  • Scatter performance is optimized for resolving lymphocytes, monocytes, and granulocytes.

Sample Acquisition Rate

  • Maximum acquisition rate (events per second) with 12 compensation pairs and 8 parameters: 70,000.
Learn More
BD-BioScience-FacsAria-IIu-Cell-Sorter-14996
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
BD BioScience FacsCanto II Flow Cytometer

BD BioScience FacsCanto II Flow Cytometer

Cambridge ID #: 12160

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

 

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

 

Includes:

  • Computer w/ FacsDiva Software
  • Fluids Cart
  • 2 laser, Blue(488) and Red (633)
  • Laser
  • 6 PMTs unit and side scatter
  • All Necessary Cables
  • Manuals

 

Optics Specifications:

  • Lasers
    • Air-cooled:
    • 488-nm solid state, 20-mW laser output
    • 633-nm HeNe, 17-mW laser output
  • Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
  • Optical Alignment Procedure: Fixed, no operator alignment required
  • Flow Cell: 180 x 430-μm rectangular quartz flow cell
  • Collection Optics: Optical-gel coupled 1.2 NA lens
  • FSC Resolution: 0 μm
  • SSC Resolution: 5 μm
  • Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
  • FSC Detector: Photodiode with 488/10 BP
  • SSC Detector: PMT with 488/10 BP
  • Fluorescence Detectors: 6 PMTs in 4-2 standard configuration
  • Blue Laser Dyes
    • FITC, PE, PerCP or PerCP-Cy™5.5,
    • PE-Cy7 (525, 575, 678 or 695, 785 nm)
  • Red Laser Dyes: APC, APC-Cy7 (660, 785 nm)
  • Detector Bands
    • Blue Laser: 530/30; 585/42; >670; 780/60 nm
    • Red Laser: 660/20; 780/60 nm
  • Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF
Learn More
BD-BioScience-FacsCanto-II-Flow-Cytometer-12160
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BD BioScience FACSCanto II 2 Laser Flow Cytometer

BD BioScience FACSCanto II 2 Laser Flow Cytometer

Cambridge ID #: 17183

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

 

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

 

Includes:

  • Computer w/ FacsDiva Software
  • Fluids Cart
  • 2 laser, Blue(488) and Red (633)
  • 3 PMTs in 4-2 configuration w/ side scatter
  • All Necessary Cables
  • Manuals

 

Optics

Lasers

  • Air-cooled
  • 488-nm solid state, 20-mW laser output
  • 633-nm HeNe, 17-mW laser output
  • Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
  • Optical Alignment Procedure: Fixed, no operator alignment required
  • Flow Cell: 180 x 430-μm rectangular quartz flow cell
  • Collection Optics: Optical-gel coupled 1.2 NA lens
  • FSC Resolution: 1.0 μm
  • SSC Resolution: 0.5 μm
  • Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
  • FSC Detector: Photodiode with 488/10 BP
  • SSC Detector: PMT with 488/10 BP
  • Fluorescence Detectors: 6 PMTs in 4-2 configuration w/ side scatter
Learn More
BD-BioScience-FACSCanto-II-2-Laser-Flow-Cytometer-17183
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Beckman Coulter 50Ti Rotor

Beckman Coulter 50Ti Rotor

Cambridge Scientific ID #'s: 6772, 14062, 14061, 4985

High-throughput analytical rotor capable of analyzing 7 samples in each run up to 50,000 rpm. Made of titanium, the AN-50 Ti analytical rotor has minimal temperature fluctuations, essential to analyzing particles by analytical ultracentrifugation (AUC). AUC is used to characterize size, shape, heterogeneity, molecular weight, stoichiometry, conjugation efficiency, payload, and binding rates of proteins, nucleic acids, nanoparticles, colloids, peptides, and viral vectors.

Specifications:

  • Maximum Speed: 50,000 rpm
  • Maximum RCF: 600 xg
  • R min: 2 cm
  • R av: 5 cm
  • Maximum Volume: 162 mL
  • Capacity: 12 x 13.5 mL
  • Tube Angle: 26 degrees
  • K Factor: 78
Learn More
Beckman-Coulter-50Ti-Rotor-6772
By clicking below we can further assist you with your inquiry. Inquire 4 In Stock Worldwide Shipping
Beckman Coulter 70.1 TI Rotor

Beckman Coulter 70.1 TI Rotor

Cambridge Scientific ID #'s: 15347, 11718

Differential centrifugation of subcellular particles.

Specifications:

  • Tube Size: 12 x 13.5 mL
  • Maximum Speed: 70000 rpm
  • Maximum RCF: 450000 xg

 

Learn More
Beckman-Coulter-70.1-TI-Rotor-15347
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Beckman Coulter Avanti J-26 XP Floor Super Speed CentrifugeImage Coming Soon

Beckman Coulter Avanti J-26 XP Floor Super Speed Centrifuge

Cambridge ID #: 14928

Features:

  • Processes up to 6 liters in less than 10 minutes
  • Switch-reluctance (SR) drive technology
  • Friction Reduction System (FRS)
  • HarvestLine System Liners for improved biosafety and storage
  • Automated Rotor Identification

 

Specifications:

  • Accel/Decel Rates: 2/3
  • Dimensions: 886 cm (with door closed) x 86 cm x 71 cm (34 in x 34 in x 28 in)
  • Weight: 290 kg (640 lb)
  • Set Temperature Range(1 degree increments): -10 to 40°C
  • Maximum Speed/g-Force: 26,000 rpm/82,000 x g
  • Temperature Control: + 2° of set temperature
  • Speed Control: + 10 rpm of set speed or 0.1%, whichever is greater
  • Ambient Temperature Range: 16° to 38°C
  • Drive Type / Cooling: SR* Drive / Air Cooled
  • Refrigeration System: Non-CFC, non-ozone depleting refrigerant
  • Power Usage / Heat Output: 2.0 kW / 6900 Btu/hr
  • Sound Level Clearances Required: 7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
  • Door: 6.1 cm (2.4 in) thick structural foam with steel plate
  • Humidity Restrictions: < 95% (noncondensing)
  • Pollution Degree: 2
  • Rotor Chamber Diameter: 51.3 cm (20 in)
  • Time – Actual Display: Indicates run time remaining (timed run) or elapsed time (hold
Learn More
Beckman-Coulter-Avanti-J-26-XP-Floor-Super-Speed-Centrifuge-14928
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Beckman Coulter JA-14 RotorImage Coming Soon

Beckman Coulter JA-14 Rotor

Cambridge ID #: 11712

Major applications include general purpose, large volume and multi tube processing. For use in Avanti J Series and J2 Series centrifuges.

Specifications:

  • Maximum Speed: 14000 rpm
  • Maximum RCF: 30100 xg
  • k-factor: 1764
  • Imbalance Tolerance: 10 g
  • R min: 35 mm
  • R av: 86 mm
  • R max: 137 mm
  • Nominal Rotor Capacity: 1500 mL (6 x 250 mL)
  • Container Dimensions: 62 x 120 mm
Learn More
Beckman-Coulter-JA-14-Rotor-11712
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping