Memmert HPP110 Environmental Chamber Incubator

Description

HPP 110 Memmert constant climate chambers guarantee the perfect atmosphere for climate and temperature tests. Our HPP110eco constant climate chamber is quiet, space-saving, environmentally friendly, and extremely economical. Let us help you build the perfect environmental test chamber.

Features:

• Setting temperature range: without light, with humidity: +5 to +70 °C; with light, with humidity: +5 to +70 °C; with light, without humidity: 0 to +70 °C; without light, without humidity: 0 to +70 °C
• Working temperature range: with light, without or with humidity: 15 to +40 °C; without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C; without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C
• Setting accuracy temperature: 0.1°C
• Temperature sensor: 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• Setting range humidity: 10 – 90 % rh
• Setting accuracy humidity: 0.5%
• Humidity: humidity supply with distilled water from external tank by self-priming pump
• Humidification & Dehumidification: humidification by hot steam generator; dehumidification by cold trap using the Peltier technology
• Peltier: energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
• ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
• Language Setting: German, English, Spanish, French, Polish, Czech, Hungarian
• Adjustable Parameters: Temperature (Celsius or Fahrenheit), relative humidity, program time, time zones, summertime/wintertime
• Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function HeatBALANCE: Adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
• Function SetpointWAIT: The process time does not start until the set temperature is reached
• Calibration: Three freely selectable values each, 2-point calibration for humidity: 20 and 90 % rh
• Temperature control: Over- and under temperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
• AutoSAFETY: additionally integrated over- and under temperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or under temperature, heating is switched off in case of overtemperature, the compressor in case of under temperature
• Autodiagnostic system: integral fault diagnostics for temperature and humidity control
• Alarm: with visual and acoustic alarm in case of over-/under temperature and under humidity, open door and empty water tank

Specifications:

• Electrical: 115 V(50/60 Hz / approx. 420 W) &  230 V(50/60 Hz / approx. 420 W)

Stainless Steel Interior

• Dimensions w(A) x h(B) x d(C): 560 x 480 x 400 mm
• Volume: 108 L
• Max. number of internals: 5
• Max. loading of chamber: 150 kgs
• Max. loading per internal: 20 kgs

Textured Stainless Steel Casing

• w x h x d : 745 x 864 x 674 mm
• Housing: rear zinc-plated steel

Stainless Steel:

For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).Digital pressure control ensures rapid and gentle vacuum drying. The speed-controlled vacuum pump (accessory) saves around 70% energy. The direct contact between the load and the heatable and removable thermoshelves in the chamber of the Memmert vacuum oven VO49 ensures rapid and uniform temperature control of food, cosmetics, watches, books, PCBs or injection molds, without the loss of heat. Two connections for thermoshelves are in the rear (1st and 3rd level). The net weight is approximately 83 kg. Features: ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays. Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days Adjustable Parameters: Temperature (Celsius or Fahrenheit), pressure (vacuum), timer Language Setting: German, English, Spanish, French, Polish, Czech, Hungarian ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays. Timer: Counter with target time setting, adjustable from 1 minute to 99 days Function SetpointWAIT: the process time does not start until the set temperature is reached Temperature control: Mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature AutoSAFETY: Additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature Auto diagnostic system: Integral fault diagnostics for temperature and humidity control Alarm: visual and acoustic Specifications: Volume: 49 L Dimensions: w x h x d : 15.7” x 15.2” x 13” Max. number of internals: 4 Max. loading of chamber: 132 lbs Max. loading per internal: 44 lbs Material: hermetically welded stainless of extremely corrosion-resistant stainless steel, material 1.4404 Interior: additional interior mountings of stainless steel, material 1.4404 (removable for cleaning), consisting of mounting at the sides with guide bars for thermoshelves and on top (diffusor) to avoid turbulences when aerating Electrical: 230 Volts, ± 10%, 50/60 Hz, approx. 8.8 A @ 230 V Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf Working Temperature Range: min. 5°C above ambient up +200°C Setting temperature range: 0.1°C Vacuum range: 5 to 1100 mbar Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum and air are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air and inert gas. Permitted final vacuum: 0.01 mbar Maximum leakage rate: 0.01 bar/h Pump control: speed control, optimized rinsing procedures for the pump membranes as well as signal for pump ON/OFF Connection: Vacuum connection with small flange DN16, and gas inlet with small flange DN16 Stainless Steel: For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable. Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question. Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use. For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).”