Description
ICH750 L Memmert Stability Climate Chambers
Former Models: ICH750L
Overview
Memmert USA sells German-built Memmert stability chambers with stainless steel inside and out. The ICH750 L stability chamber will save energy and perform well for any project.
Temperature Specs:
- Working temperature range with humidity: +10 °C to +60 °C
- Setting accuracy temperature: 0.1 °C
- Temperature: 2 Pt100 sensors Class A in 4-wire circuit, mutually monitoring and taking over the performance at the same temperature value
Humidity Specs:
- Humidity supply with distilled water from external tank by self-priming pump
- Humidification by hot steam generator
- Active humidifying and dehumidifying adjustable from 10–80 % rh with digital display of relative humidity
- Resolution of display: 0.1 % rh, setting accuracy: 0.5 % rh
Control of Standard Components:
- Illumination unit consisting of 3 fluorescent lights with cold white light (standard illuminant D65, 6500K) and 2 UV lamps in the spectral range of 320–400 nm
- Daylight and UV-light can be programmed individually via controller
- Light: cold white light ± 6 %, UV light ± 10 %
Control Technology:
- ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID microprocessor controller with 2 high-definition TFT-color displays
- Language settings: German, English, Spanish, French, Polish, Czech, Hungarian
- Adjustable parameters: Temperature (°C or °F), relative humidity, program time, time zones, daylight savings time
- Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
- Function SetpointWAIT: The process time does not start until the set temperature is reached
- Calibration: Three freely selectable values each, temperature/humidity/CO₂
Safety:
- Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating approx. 10 °C above nominal temperature
- Temperature control: over- and under temperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, adjustable at the controller
- AutoSAFETY: integrated over- and under temperature protection “ASF”, automatically following the setpoint value at a preset tolerance range. Alarm in case of over- or under temperature. Heating is switched off in case of overtemperature, compressor in case of undertemperature
- Autodiagnostic system: integral fault diagnostics for temperature and humidity control
- Alarm: visual and acoustic alarm in case of over-/under temperature and under humidity, open door, or empty water tank
Electrical Data:
- 230 Volts (±10 %), 50 Hz, approx. 1550 W
Stainless Steel Interior:
- Volume: 749 L
- Dimensions (W × H × D): 1040 × 1200 × 600 mm
- Max. number of internals: 14
- Max. loading of chamber: 200 kg
- Max. loading per internal: 30 kg
Exterior:
- Textured stainless steel casing
- Dimensions (W × H × D): 1224 × 1950 × 785 mm
- Housing: rear zinc-plated steel
- Installation: on lockable castors
Stainless Steel:
For many years, exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch-resistant, robust, and durable.
Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust, and recyclable without question.
For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, trays, housings, interior basins, and accessories for every heating bath use stainless steel of class W-St. 1.4301 (ASTM 304).
