Description
Digital pressure control ensures rapid and gentle vacuum drying, its speed controlled vacuum pump (accessory) saves around 70% energy. The direct contact between the load and the heatable and removable thermoshelves in the chamber of the Memmert vacuum oven VO29 ensures rapid and uniform temperature control of food, cosmetics, watches, books, PCBs or injection molds, without the loss of heat. Net weight is approximately 55 kg.
Features:
- Adjustable Parameters: Temperature (Celsius or Fahrenheit), pressure (vacuum), timer
- Language Setting: German, English, Spanish, French, Polish, Czech, Hungarian
- ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays.
- Timer: Counter with target time setting, adjustable from 1 minute to 99 days
- Function SetpointWAIT: the process time does not start until the set temperature is reached
- Temperature control: Mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
AutoSAFETY: Additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature - Auto diagnostic system: Integral fault diagnostics for temperature and humidity control
- Alarm: visual and acoustic
Specifications:
- Volume: 29L
- Dimensions: w x h x d : 15.2” x 12” x 9.8”
- Max. number of internals: 3
- Max. loading of chamber: 88 lbs
- Max. loading per internal: 44 lbs
- Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf
- Setting temperature range: 0.1°C
- Working Temperature Range: min. 5°C above ambient up +90°C
- Vacuum range: 5 to 1100 mbar
- Permitted final vacuum: 0.01 mbar
- Maximum leakage rate: 0.01 bar/h
- Pump control: speed control, optimized rinsing procedures for the pump membranes as well as signal for pump ON/OFF
- Connection: Vacuum connection with small flange DN16, and gas inlet with small flange DN16
- Pressure control: Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum and air are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
