Used Lab Equipment

Used Lab Equipment

At Cambridge Scientific Products, we offer an extensive range of equipment for your laboratory. Interact with our search tool below to explore our current products, or filter by a product category to see our most up to date product offerings in each of these categories.

Beckman Coulter L-90K Floor Ultra Speed Centrifuge

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Beckman Coulter L-90K Floor Ultra Speed CentrifugeImage Coming Soon

Beckman Coulter L-90K Floor Ultra Speed Centrifuge

Cambridge Scientific ID #: 22286

Specifications:

 

Weight: 465 kg (1025 lb)

Height (overall): 120.7 cm (47.5 in.)

Width: 94.0 cm (37 in.)

Depth: 67.3 cm (26.5 in.)

Ventilation clearances: 5.1 cm (2 in.) sides; 15.2 cm (6 in.) rear

Maximum heat dissipation into the room: 1.0 kW (3400 Btu/hr)

Humidity restrictions: <95% (non-condensing)

Noise level measured 0.91 m (3 ft) in front of the Instrument: <57 dBa

Installation (overvoltage) category: II

Pollution degree: 2a

Revolution Counter: Displays accumulated total number of rotor revolutions in tens of thousands

Barrier Ring: 41-mm (1.63-in.) heat-treated steel alloy armor ring surrounded by a 12-mm (0.50-in.) steel vacuum chamber to provide full protection for the operator

Door: 17.5-mm (0.69-in.) high-strength structural steel

Vacuum: Diffusion pump in series with a mechanical pump typically reduces chamber pressure to below 5 microns (0.7 Pa)

Speed:

  • Set speed: 1000 rpm to maximum speed in increments of 100 rpm
  • Speed control:  Actual rotor speed will be ±20 rpm of the set speed (above 1000 rpm)
  • Speed display: Indicates rotor speed in increments of 10 rpm at speeds below 1000 rpm, and increments of 100 rpm at speed above 1000 rpm

Time:

  • Set time: Up to 99 hours and 59 minutes; HOLD for runs of unspecified length
  • Time display: Indicates time remaining in timed runs, time elapsed in HOLD runs, and estimated time remaining in ω2t runs

Temperature:

  • Set temperature: 0 to 40°C in increments of 1°C
  • Temperature control: ±0.5°C of set temperature
  • Temperature display: Indicates rotor temperature in increments of 0.1°C
  • Temperature stability: Within 0.3°C of set after equilibration
  • Ambient temperature range: 15 to 40°C

ω2t Integrator:

  • Set ω2t: Up to 9.99 × 1014 radians squared per second
  • ω2t display: Shows accumulated centrifugal force to three significant digits (in exponential notation)

Acceleration: Selection from two profiles: maximum acceleration from 0 rpm to set speed, or slow acceleration from 0 to 500 rpm, followed by maximum acceleration to set speed

Deceleration: Selection from three profiles: full dynamic braking to 0 rpm, slow (full brake to 500 rpm followed by reduced braking to a gentle stop), or no brake

Operation: Standard, programmed, or delayed start; instrument memory can store up to nine programs

Key Switch: Used to select normal or zonal operation

In Stock Worldwide Shipping Call: 1-877-Used-Lab

Our used lab equipment is fully refurbished, guaranteed to work up to manufacturers specifications and are delivered to our customers in as close to new condition as possible. Typical turnaround for refurbishing of used lab equipment is 2-4 weeks. They also come with our standard 6 Month parts and labor warranty. Prices do not include S/H unless otherwise indicated. Pictures enclosed and the actual unit may vary unless specified.

Inquire

Contact Us:

Thank you for your interest in the Beckman Coulter L-90K Floor Ultra Speed Centrifuge (ID #: 22286). To speak with a representative, please fill out the contact form below or call us directly.