At Cambridge Scientific Products, we offer an extensive range of equipment for your laboratory. Interact with our search tool below to explore our current products, or filter by a product category to see our most up to date product offerings in each of these categories.
Readability: 0.1 mg
Weighing capacity: 205 g
Taring range (by subtraction): 0…205 g
Reproducibility (s) 0...50 g: 0.04 mg
Reproducibility (s) 50...100 g: 0.05 mg
Reproducibility (s) 100...200 g: 0.07 mg
Linearity: ± 0.15mg
Stabilization time (typical): 3,5,7 s
Built-in calibration weights: 2x100 g
Calibration FACT: Fully automatic motorized self-calibration with two built-in weights (manual triggering also possible). Test possibility to check the calibration.
Calibration with external weight: 200 g
Display with METTLER Deltatrac: VFD (vacuum fluorescent)
Display sequence: 0.2...0.4 s variable
Sensitivity drift (5...40°C): Maximum deviation with automatic self-calibration ±0.00015%,(with automatic self-calibration switched off) 1 ppm/°C.
Linearization: Automatic self-linearization of the weighing curve (simultaneously with motorized calibration FACT).
Data interface: CL and RS232C, bidirectional, built in as standard, all lines galvanically separated.
Glass draft shield: No hindering guideways; automatic motorized opening or at a keystroke.
Inner draft shield AT: Standard
AC adapter (to national codes): Voltage 115 V or 230 V, admissible voltage fluctuations: +15...-20%. Frequency: 50...60 Hz; power consumption 15,5W max.
Admissible ambient conditions: Temperature: 5...40 °C; relative humidity: 25...85% (non-condensing). Height above sea level: -500...+6000 m.
Weighing pan feedthrough for below-the-balance weighing: 80x80 [mm]; stainless steel
Measures: Free height above weighing pan 239 mm, Balance housing 241x433x289 (WxLxH), AC adapter 115x140x53mm (WxLxH)
Weight: Balance 9.3 kg, AC adapter 1.2kg
Vibration adapter (symbol [ ~ ]): 3 settings for matching to location: suppression of the effect of vibrations.
Weighing process adapt. (symbol [ ]): 4 settings for matching to weighing application: dispensing, universal setting, absolute weighing, special applications.
Stability detection (ASD): 8 settings with different tolerance thresholds (off, 1...7).
Weight unit 1: Freely selectable in the configuration register: g, mg, oz, ozt, tl, GN, dwt, ct, C.M., mo.
Weight unit 2 (incl. applications): Freely selectable in the configuration register: g, mg, oz, ozt, tl, GN, dwt, ct, C.M., mo, PCS, Stk, %. The selected weight units 1 and 2 can be switched at a keystroke.
Applications: PCS, Stk. (piece counting, reference 10, 20, 50, 100) and % (percent weighing) are built-in applications.
Data interface (built-in): Current loop interface, 20 mA passive (CL) and RS-232C interface. Bidirectional, asynchronous, 7 data bits, alphanum. ASCII character set. Receptacle: 15-pin, MiniMettler, all lines galvanically separated. Interface settings in the configuration register: Send mode: stable, all, auto, cont. Baudrate: 150, 300, 600, 1200, 2400, 4800, 9600 Bd. Parity: even, odd, off (= mark), space. Handshake: pause, CL, off, hard (CTS/DTR), soft (XON/XOFF). End-of-line: CRLF, CR.
Our used lab equipment is fully refurbished, guaranteed to work up to manufacturers specifications and are delivered to our customers in as close to new condition as possible. Typical turnaround for refurbishing of used lab equipment is 2-4 weeks. They also come with our standard 6 Month parts and labor warranty. Prices do not include S/H unless otherwise indicated. Pictures enclosed and the actual unit may vary unless specified.