Used Lab Equipment
At Cambridge Scientific Products, we offer an extensive range of equipment for your laboratory. Interact with our search tool below to explore our current products, or filter by a product category to see our most up to date product offerings in each of these categories.
Thermo Forma EasyPure II UV Water Purification
Image Coming SoonThermo Forma EasyPure II UV Water Purification
Cambridge Scientific ID #: 12547Description: The Thermo Scientific EASYpure II RF is a batch-fed water purification system designed to provide Type I reagent-grade water with extremely low organic carbon content. It uses a three-stage deionization process combined with a 0.2 micron final filter to polish pretreated water (distilled, deionized, or reverse osmosis) to produce water with a resistivity of up to 18.2 megohms-cm and with a total organic carbon content of less than 10 ppb. Water resistivity is continuously sensed by a resistivity cell and displayed on a digital display. The EASYpure II RF is designed to be a bench mounted unit. If wall mounting is required, contact Technical Services for information on a wall bracket and mounting accessory.
Specifications:
- Dimension Requirements: 12" W X 19" D X 18 1/8" H (30.5 cm X 48.3 cm X 46.0 cm)
- Clearance Requirements: Sides - 4" (10.1 cm) minimum to allow air flow, Above - 12" (30.5 cm) minimum for reservoir replenishment
- Storage Reservoir Capacity: Approximately 6.5 liters usable, 7.0 liters total
- Electrical Requirements: 100-240 VAC +5% -10%, 47-63 Hz.
- Resistivity: 18.2MW·cm at 25°C
- Conductivity: 0.055 µS/cm
- Feedwater Source: Pretreated
- Flow Rate: Up to 1L/min.
- Bacterial Content: <1CFU/mL
- Particles >0.2µM/mL: <1 μM/mL
- TOC Monitor with UV Intensity Monitoring: No
- Feed Water Monitoring: No
- Feedwater Pressure: 100psig (6.9 bar)
- Voltage: 100 to 240VAC
- Hertz: 50/60Hz
- Inlet Water Temperature (Metric): 4° to 40°C
- Electrical Requirements: 100 to 240VAC 50/60Hz
Our used lab equipment is fully refurbished, guaranteed to work up to manufacturers specifications and are delivered to our customers in as close to new condition as possible. Typical turnaround for refurbishing of used lab equipment is 2-4 weeks. They also come with our standard 6 Month parts and labor warranty. Prices do not include S/H unless otherwise indicated. Pictures enclosed and the actual unit may vary unless specified.