Used Lab Equipment

This user-friendly detector brings high sensitivity fluorescence detection for you needs whether used alone or in an automated Agilent 1200 Series system. One run will provide quantitative data and fluorescence spectra all the while improving sensitivity and selectivity with the simultaneous multi-wavelength detection capabilities.

Specifications:

• Environment: 0 – 40°C
• Dimensions: 17 x 13.5 x 5.5 in
• Weight:5 lbs
• Flow Cells: 8 uL volume and 20 bar pressure max
• Scan Speed: 28 ms/data point
• Step Size: 1 – 20 nm
• Wavelength Repeatability: +/- 0.2 nm
• Wavelength Accuracy: +/- 3 nm
• Single Wavelength Operation: RAMAN (H2O) > 500
• Ex: 350 nm
• Em: 397 nm
• Dark Value: 450 nm
• Dual Wavelength Operation: RAMAN (H2O) > 300
• Ex: 350 nm
• Em: 397 nm
• Dark Value: 450 nm
• Pulse Frequency: 296 Hz for single signal mode. 74 Hz for economy mode
• Maximum Data Rate: 18 Hz
• Excitation Monochromator Range: 200 – 1200 nm
• Bandwidth: 20 nm
• Emission Monochromator Range: 200 – 1200 nm
• Bandwidth: 20 nm

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation

for LC systems.

Specifications:

• Weight: 15.5 kg (34.2 lbs)
• Dimensions (height × width × depth): 200 × 345 × 440 mm (8 × 13.5 × 17 inches)
• Line voltage: 100 – 240 VAC, ±10 % Wide-ranging capability
• Line frequency: 50 or 60 Hz, ±5 %
• Power consumption (apparent power): 300 VA Maximum
• Power consumption (active power): 200 W Maximum
• Ambient operating temperature: 4 to 55 8C (41 to 131 8F)
• Ambient non-operating temperature: -40 to 70 8C (-4 to 158 8F)
• Humidity: < 95 %, at 25 to 40 8C (77 to 104 8F) Non-condensing
• Operating Altitude: Up to 2000 m (6500 ft)
• Non-operating altitude: Up to 4600 m (14950 ft) For storing the autosampler

Comprises a 4-channel vacuum container, including 4 tubular plastic membranes, and a vacuum pump.

Specifications:

• Maximum flow rate:
  • 10 ml/min per channel
  • 5-10 ml/min per at reduced degassing performance
• Number of channels: 4
• Internal volume per channel: Typically 12 ml per channel
• Materials in contact with solvent: PTFE, PEEK
• pH range: 1 – 14
• Analog output (AUX): For pressure monitoring, range 0 – 3 V

Can be sold as an individual component or as part of a complete stack

Specifications:

• Flow rate range: 1-10,000 µL/min
• Flow rate accuracy: ±0.1% at 1 mL/min
• Flow rate precision: <0.05% RSD or <0.01 min SD, whichever is greater
• Pressure range: 2-50 MPa (7250 psi)
• Pressure ripple: Typical <0.2 MPa or <1%, whichever is greater

Specifications:

• Temperature range: 5 °C to 85 °C (max. 18 °C below ambient)
• Temperature accuracy: ±0.5 °C
• Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C
• Column capacity: Up to 6 columns, max. 30 cm length
• Heatup time: Typically 15 minutes 20 °C to 50 °C Cooldown time: Typically 18 minutes 50 °C to 20 °C
• Control: All functions software controlled via USB
• I/O interfaces: 2 digital inputs, 2 programmable relay outputs

Specifications:

• Sample capacity: Dependent on the carousel configuration: Vials/ Well plates
• Injection methods: Inline split-loop
• Injection volume settable range: 0.01 – 100 µL (1 – 100 µL)
• Injection volume accuracy: Typically ±0.5% at 50 and 90 µL
• Minimum sample required: 1 µL out of 5 µL (250 µL conical vial)
• Injection cycle time: <15 seconds for 5 µL

Waters 2996 Photo Diode Array (PDA) Detector has uniquely-integrated software and optics innovations that deliver no-compromise chromatographic and spectral sensitivity, reliability and ease of use for analytical and preparative separations. Advanced spectral analysis enhances component recognition and homogeneity assessment.

Features:

• Maximum chromatographic sensitivity means unprecedented trace impurity detection and quantification.
• Optimized spectral sensitivity and Waters purity algorithms mean definitive compound identification and co-elution detection.
• Superior linearity range defined by a fixed optical bandpass
• Simplified optics that are reliable and easy to maintain
• Method development and validation are fast and straight forward with uncomplicated method development tools within Empower
• Compliance-ready for the FDA Electronic Records and Electronic Signatures Rule
• Start-up diagnostics that ensure detector performance prior to use

Specification:

• Linearity range: 5% over -0.1 to 2.0 AU
• Spectral resolution: 1.2 nm per photodiode
• Baseline noise: 5 x 10 -5 AU peak-to-peak
• Drift: 1 x 10 -3 AU/hour at 254 nm (after warmup)
• Operating temperature: 4 to 40 ¡ãC (39 to 104 ¡ãF)
• Operating humidity: 20 to 80% non-condensing
• Wavelength accuracy: 1nm
• Wavelength range: 190 to 800 nm

The Agilent 1290 Infinity Thermostatted Column Compartment is a stackable temperature-controlled column compartment for LC. It is available as standalone module or as a component of an Agilent 1290 Infinity system. It is used for heating and cooling to meet extreme requirements of retention time reproducibility.

Specifications:

• Temperature range:
  • 10 degrees below ambient to 100 °C
  • up to 80 °C: flow rates up to 5 ml/min
  • up to 100 °C: flow rates up to 2.5 ml/min
• Temperature stability: ± 0.05 °C
• Temperature accuracy:
  • ± 0.8 °C
  • ± 0.5 °C
• Warm-up/cool-down time:
  • 5 min from ambient to 40 °C
  • 10 min from 40 – 20 °C
• Dead volume:
  • 1.6 µl low dispersion heat exchanger
  • 3 µl left heat exchanger
  • 6 µl right heat exchanger

Features:

The Binary pump is designed for highest performance, GLP compliance and easy maintenance.

It includes the following features:

• Seal wash for continued high lifetime of pump seals for buffer applications.

• Solvent selection valve for method flexibility.

• Jet Weaver for optimum mixing performance with a minimum of delay volume.

• Automatic purge function for ease of use and unattended preparation of the system.

• Auto tuning of the delivery cycle for compensation of elasticity and solvent volume change effects (compressibility, thermal expansion, mixing contraction).

• Solvent selection for optimum flow and composition accuracy.

• Fast defill function for improved intake and delivery performance.

• Two pistons in series design for increased reliability.

• High resolution piston movement control for smooth and reliable motion.

Specifications:

• Hydraulic system: Two dual pistons in series pumps with proprietary servo-controlled variable stroke design, power transmission by ball screws, smooth motion control of pistons for active damping.
• Settable flow range:  Setpoints 0.001—5 ml/min, in 0.001 ml/min increments.
• Flow precision: ≤0.07 % RSD or 0.005 min SD, whatever is greater (0.2—5.0 ml/min).
• Flow accuracy:  ±1 % or 10 µl/min, whatever is greater.
• Pressure operating range: Operating range up to 120 MPa (1200 bar), up to 2 ml/min, 80 MPa (800 bar) at 5 ml/min.
• Pressure pulsation:  <1% amplitude or < 0.5 MPa (5 bar), whatever is greater.
• Compressibility compensation: Automatic, pre-defined, based on mobile phase selection.
• Gradient formation: High pressure binary mixing
• Delay volume: 
  • Jet Weaver V35: <45 µl
  • Jet Weaver V100: <75 µl
• Composition range Settable range: 0 - 100 %
• Composition precision: <0.15 % RSD, or 0.01 min SD, whatever is greater
• Composition accuracy: ±0.35 % absolute (5 – 95 %, 0.2 – 5.0 ml/min)

The Agilent 1290 Infinity Multisampler sets a new benchmark in flexibility. This autosampler can handle both vials and microtiter plates (whether shallow or deep) with ease and efficiency. This compact module has the capacity to house up to 6,144 samples plus the robotics to smoothly inject each into the chromatograph in turn. With Agilent’s unique dual- needle design, cycle time can be as low as just 5 seconds. With the multi- wash capability, you can reduce carryover to less than 10 parts per million. This innovative Multisampler is designed to provide maximum flexibility and scalability.

Specifications:

• Injection range:1- 20 µL in 0.1 µL increments
• Precision: Typically (0.15% RSD or SD<10 nL
• Pressure range: Up to 1200 bar
• Sample viscosity range:2 – 5 cp
• Sample capacity:
  • 1H Drawer: Up to 8 drawers and 16 positions Shallow well plates (MTP)
  • 2H Drawer: Up to 4 drawers and 8 positions MTP, deep well plates, vials, Eppendorf
  • 3H Drawer: Up to 2 drawers and 4 positions MTP, deep well plates, vials up to 6 mL, Eppendorf
• Injection cycle time: <10 s using following standard conditions
  • Default draw speed: 100 µL/min
  • Default eject speed: 400 µL/min
  • Injection Volume: 1 µL

The Agilent 1290 Infinity Thermostatted Column Compartment is a stackable temperature-controlled column compartment for LC. It is available as standalone module or as a component of an Agilent 1290 Infinity system. It is used for heating and cooling to meet extreme requirements of retention time reproducibility.

Specifications:

• Temperature range:
  • 10 degrees below ambient to 100 °C
  • up to 80 °C: flow rates up to 5 ml/min
  • up to 100 °C: flow rates up to 2.5 ml/min
• Temperature stability: ± 0.05 °C
• Temperature accuracy:
  • ± 0.8 °C
  • ± 0.5 °C
• Warm-up/cool-down time:
  • 5 min from ambient to 40 °C
  • 10 min from 40 – 20 °C
• Dead volume:
  • 1.6 µl low dispersion heat exchanger
  • 3 µl left heat exchanger
  • 6 µl right heat exchanger

This LCMS brings you the best in quantitative sensitivity and robustness to expand upon the experiments going beyond MRM, and gives you substantial improvements in data quality.

Includes:
• AB Sciex 4500 LC/MS/MS
• Windows 7 Computer Loaded with Analyst 1.6 Software 

Specifications:
• Sensitivity MRM: Mode Reserpine 200 fg on column S/N > 2000 C.V. < 5%
• Maximum scan speed: 12,000 Da/sec
• Polarity switching time: 50 msec, in MRM and scheduled MRM (sMRM) modes
• Minimum MRM dwell time: 1 msec
• Mass range (m/z): 5-2000 
• Cross talk for reserpine 609/195: <0.5% cross talk detectable with 2 msec dwell time and 3 msec inter-MRM pause time
• Triple quadrupole mass stability: 0.1 Da over 24 hours
• Scan types: Full scan MS and selected ion MS for both Q1 and Q3, product ion scan, precursor ion scan, neutral loss or gain scan, multiple reaction monitoring (MRM), and scheduled MRM (sMRM)
• Detector type: AcQuRate Pulse Counting CEM
• Dynamic range: 4 orders of magnitude
• Ionization sources: Turbo V source housing with TurboIonSpray probe or APCI probe.
• Maximum temperature: 750ºC
• Flow rate compatibility: 5 μL/minute to 3 mL/minute
• Power: 208V 50/60Hz AB Sciex 4500, 208V Vacuum Pump, 
• Dimensions: 37" x 33" x 55" Sciex 4500
• Weight: 250lbs

Options:  

• Front end HPLC/ UPLC available
• Waters 
• Agilent  
• Shimadzu 

• 1 Year Service Contract Available

The Agilent 6460C Triple Quadrupole LC/MS System is equipped with Agilent Jet Stream Technology to enable enhanced sensitivity. The 6460 provides a fast and robust solution to simultaneously quantify, screen, and confirm analytes in the laboratory.

• Greater signal and reduced noise - Agilent Jet Stream technology uses super-heated nitrogen to improve ion generation and desolvation
• Efficient analysis – fast MRM speeds allow for analysis of over 100 overlapping compounds in a given retention time window
• Screen, confirm and quantify – Triggered MRM (tMRM) combines fast and sensitive MRM quantitation with the generation of a product ion spectrum for library searching and compound screening and confirmation
• Fast polarity switching for analysis of both positive and negative ions

Specifications:

• MRM sensitivity Signal-to-Noise ratio ESI positive: S/N > 30,000:1 Noise 1 × RMS
• MRM sensitivity Signal-to-Noise ratio (S/N) ESI negative: S/N > 10,000:1 Noise 1 × RMS
• MRM sensitivity Instrument Detection Limit (IDL) ESI positive: IDL < 12.5 fg
• MRM sensitivity Instrument Detection Limit (IDL) ESI negative: IDL < 12.5 fg
• Mass range: m/z 5 – 3,000
• Polarity switching: 30 ms
• Mass resolution (autotune):7 Da
• Mass resolution (manual tune):5 Da
• Mass accuracy:
  • Da from 5 – 1,000 m/z
  • 01% from 1,000 – 2,000 m/z
  • 02% from 2,000 – 3,000 m/z
• Mass stability: < 0.1 Da in 24 h
• Dynamic range: > 6.0 × 106
• Scan modes: MS scan, MS/MS product ion scan, MRM, MS/MS neutral loss/gain scan and precursor ion scan, SIM
• Maximum scan rate: 12,500 Da/s
• Minimum MRM dwell time: 1 ms
• MRM transitions: 450 per time segment > 40,000 ion transactions per method
• Dynamic MRM transitions: 4,000 ion transitions per method
• Triggered MRM transitions: Up to 10 MRM transitions (primary and secondary) for library search and compound confirmation
• Collision cell ion clearance: < 1 ms