Used Lab Equipment

Includes Installation and One year Service Contract

Includes:

• G1946D LC/MSD Mass Spectrometer Series SL
• Roughing Pump
• Optional Front end HPLC

Specifications

• Mass Range: 2-3000m/z
• Mass Accuracy: +/-.13 u within the calibrated mass range in scan mode
• Mass Axis Stability: +- 0.13 u over 8 hours
• Scan Speed:
  • 2500 u/s standard mode
  • 5250 u/s fast scan mode
• SIM Sensitivity:
  • ESI at 400 ul/min
  • APCI at 1000 ul/min
  • Selected ion monitoring of m/z 609.3
  • Positive ionization
  • Signal To Noise Ratio
  • Quantity: 1 pg reserpine 100:1 RMS (20:1 peak-to-peak)
• Scan Sensitivity:
  • ESI at 400 ul/min
  • APCI at 1000 ul/min
  • Scan range m/z 100-650
  • Scan speed 2500 u/s
  • Extracted ion at m/z 609.3
  • Positive ionization
  • Signal To Noise Ratio
  • Quantity: 50 pg reserpine 100:1 RMS (20:1 peak-to-peak)
• Multiple Signal Acquisition: Ability to cycle through four different acquisition modes on a scan-by-scan basis within a single run

Optional Installation, Familiarization, and Extended Warranty available

Includes:

• G1322 Degasser
• G1311 Quarternary Pump or G1312A Binary Pump($1000 Less)
• G1313A Autosampler
• G1316A Column Compartment
• G1315A Diode Array Detector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

The components can be customized to your needs.

Please let me know if I can be of any additional assistance.

Includes: 

• Qty (2) - G1361A Agilent 1100 Series Prep Pumps
• G1315A DAD Diode Array Detector (G1314A VWD Detector also available)
• G2258A Agilent 1100 Prep Autosampler
• G1364B AFC Automated Fraction Collector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

Specifications:

• Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  • 900 µl in 0.1 µl increments (recommended 1 µl increments)
  • Up to 1800 µl with multiple draw (hardware modification required)
  • Up to 5000 µl with multiple draw (hardware modification required)
• Replicate injections: – 99 from one vial
• Precision:
  • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
  • Typically < 1% RSD of peak areas from 2000 – 5000 µl
  • Typically < 3% RSD of peak areas from 1 – 5 µl
• Minimum sample volume:
  • µl from 5 µl sample in 100 µl microvial
  • 1 µl from 10 µl sample in 300 µl microvial
• Sample viscosity range: 0.2 – 50 cp
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s, depending on draw speed and injection volume

Includes:

• Agilent G1322A Degasser
• Agilent G1311A Quat Pump
• Agilent G1329A Autosampler
• Agilent G1330A Autosampler Chiller
• Agilent G1365D DAD (Diode Array Detector)
• Agilent G1316A Column Compartment
• Solvent Tray
• Computer Loaded with ChemStation
• Cables and Manuals

The G1311A is an optimized design ensuring virtually pulse-free and stable solvent flow with dual floating pistions.  An inlet valve electronically activated and synchronized to piston stroke eliminates vapor formation with volatile solvents and is maintenance free.  Instrument comes equipped with four solvent inlets with built-in gradient control. 

Specifications:

• Configurable Flow Range: 0.001 – 10ml/min – in 0.001ml/min increments
• Flow Range: 0.2 – 10.0 ml/min
• Recommended pH Range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel
• Gradient Formation: Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve. Delay volume 800-1100µl, depending on back pressure

Features:

The Agilent 1200 Series G1312A Binary Pump is designed for top performance high-pressure mixing. This unit's reliable design keeps maintenance to a minimum by using electronically-controlled active inlet-valves for flow rates up to 5.0 mL/min. Floating pistons ensure the highest seal, low internal and external volumes of capillary connections, minimum bench space needed due to two dual-piston, in-series pumps in one housing.

Specifications:

• Weight: 15.5 kg (34 lbs)
• Dimensions: 7 x 13.5 x 17 in. (18 x 34.5 x 43.5 cm)
• Line voltage: 100 – 240 VAC, ± 10%, Wide-ranging capability
• Line frequency: 50 or 60 Hz, ± 5%
• Power consumption: 220 VA, 74 W / 253 BTU Maximum
• Ambient operating temperature: 4–55 °C (41–131 °F)
• Ambient non-operating temperature: -40–70 °C (-4–158 °F)
• Humidity: < 95%, at 25–40 °C (77–104 °F) Non-condensing
• Operating Altitude: Up to 2000 m (6500 ft)
• Non-operating altitude: Up to 4600 m (14950 ft) For storing the module
• Safety standards: IEC, CSA, UL, Installation Category II, Pollution Degree 2
  
  

Specifications:

• Hydraulic system: Two dual piston in series pumps with proprietary servo-controlled variable stroke drive, floating piston design and active inlet valve
• Setable flow range: Setpoints 0.001 - 5 ml/min, in 0.001 ml/min increments
• Flow range 1 - 5.0 ml/min
• Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min
• Pressure: Operating range 0 400 bar (0 - 5880 psi) up to 5 ml/min
• Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 1 MPa
• Compressibility compensation: User-selectable, based on mobile phase compressibility
• Recommended pH range: 0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
• Gradient formation: High-pressure binary mixing, delay volume 180 - 480 μl without mixer, 600 - 900 μl with mixer, dependent on back pressure
• Composition range 1- 99 % or 5 μl/min per channel, whatever is greater
• Composition precision < 0.2 % SD, at 0.1 and 1 ml/min
• Control and data evaluation Agilent ChemStation for LC Control and data evaluation

Can be sold as an individual component or as part of a complete stack

Specifications: 

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Noise: ± 0.75 x 10 -5 AU, at 254 nm
• Drift: 3 x 10-4AU/hr, at 254 nm
• Linearity: >2 AU upper limit
• Wavelength range: 190-600 nm
• Wavelength accuracy: ± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
• Wavelength bandwidth: 6.5 nm typical over whole wavelength range
• Maximum data rate: 55 Hz

Specifications: 

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Noise: ± 0.75 x 10 -5 AU, at 254 nm
• Drift: 3 x 10-4AU/hr, at 254 nm
• Linearity: >2 AU upper limit
• Wavelength range: 190-600 nm
• Wavelength accuracy: ± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
• Wavelength bandwidth: 6.5 nm typical over whole wavelength range
• Maximum data rate: 55 Hz

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

The Agilent 1200 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

Optional Column Selection Valve

Specifications:

• Temperature Range: 10° below ambient to 80° C
• Temperature Stability: ± 0.15°C
• Temperature Accuracy: ± 0.8°C
• Column Capacity: Three 30cm columns
• Warm-up/Cool Down: 5 mins from ambient to 40°C

Specifications:

• Maximum flow rate: 10 ml/min per channel
• Number of channels: 4
• Internal volume per channel: Typically 12 ml per channel
• Materials in contact with solvent: PTFE, PEEK
• pH range: 1 – 14
• Analog output (AUX): For pressure monitoring, range 0 – 3 V

Specifications:

• Detection type: 1024-element photodiode array
• Light source: Deuterium and tungsten lamps
• Wavelength range: 190 – 950 nm
• Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
• Drift: 2 × 10-3AU/hr at 254 nm
• Linear absorbance Range: 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 – 400 nm
• Slit width: 1, 2, 4 , 8, 16 nm
• Diode width: < 1 nm
• Flow cells
  • Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
  • Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
  • High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
  • 500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
• Control and data Evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

Can be sold as an individual component or as part of a complete stack