Used Lab Equipment

Features:

• Operated using BioTek’s Gen5™ or KC4™ Data Analysis Software
• Dual-optics design, with separate fluorescence and absorbance channels
• 3 mm top and 5 mm bottom fluorescence probes (standard configuration)
• Optional 1.5 mm top/bottom, 3 mm bottom fluorescence probes (custom
• configurations)
• Optional Time-Resolved Fluorescence (TRF) capability (“T” models, e.g., SIAFRT)
• Fluorescence N ranges:
• Standard low-noise PMT
• ¾ Excitation: 300 to 650 nm (200 to 700 nm with “T” models)
• ¾ Emission: 300 to 700 nm
• Optional red-extended PMT
• ¾ Excitation: 300 to 650 nm (200 to 800 nm with “T” models)
• ¾ Emission: 300 to 800 nm
• Absorbance N range of 200 to 999 nm
• Absorbance OD range from 0.000 to 4.000 OD
• Low, Medium, High and Variable plate-shaking speeds with adjustable durations
• All models read 6-, 12-, 24-, 48-, 96- and 384-well microplates
• Injector models dispense to 6-, 12-, 24-, 48-, and 96-well microplates
• Operates from 100 to 240 V~ (± 10%) @ 50 to 60 Hz
• One serial COM port (9-pin female connector)
• One USB port
• 4-Zone™ incubation to 50ºC
• Optional dual-reagent dispensing capability

Features:

The KNF LABOPORT N840.3FTP two-stage diaphragm vacuum pump is suitable for use with concentrators, rotary evaporators, and distillation equipment (sold separately). The pump has a 34 liters per minute (LPM) free air capacity with vacuum to 8 Torr and its polytetrafluoroethylene (PTFE) air flow path is corrosion resistant. The oil-free diaphragm pump allows operation without oil misting and contaminated oil disposal. The pump accepts 115V, 60 Hz input power.

KNF Neuberger, a division of KNF Group, manufactures diaphragm pumps and systems for gases, vapors, and liquids for laboratory and manufacturing applications. The company, founded in 1977, is headquartered in Trenton, NJ.

Specifications: 

• Flow rate at atm. pressure: 20L/min

• Ultimate vacuum: 8 mbar

• Operating pressure: 14.5 psig

• Connectors for tube: 3/8 in

• Permissible media and ambient temperature: +5 … +40 °C

We offer Fume hoods Brand New and fabricated to order.  For custom design please inquiry with the following information: 

1. Size: 3’, 4’, 5’, 6’, and 8’
2. Blower: Do you need a blower for the fume hood or would will to be connecting to a centralize HVAC system?
3. What type of service do you need on the fume hood:  Water, Gases, Cupsink, Faucet, AirFlow Monitor, and/or Duplex
4. What type of storage cabinet underneath: Flammable, Corrosive and/or General Storage

Description:

Homogenizers are ideal for plant and animal homogenization, PCR applications, soil and wastewater extractions, and Karl Fischer titration. These high-speed rotor/stator homogenizers feature infinitely variable speed control and can be used to rapidly crush, tear, disintegrate, emulsify, or suspend particles in a liquid medium. The systems impart shear energy into a liquid emulsion or suspension far greater than that of a conventional mixer. The accessory dispersing elements provide a wide range of volumes and applications.

Description:

Achieve maximum solute recovery with the Thermo Scientific™ Deep Vacuum Oil Pumps for Vacuum Concentrators, designed to work with all Thermo Scientific™ SpeedVac™ concentrating and freeze drying systems.

Specifications:

• Oil Capacity: 0.7 L
• Pump Displacement: 116 L/min. (at 60 Hz); 97 L/min. (at 50 Hz)
• Ultimate Vacuum Level: 1.5 mtorr/1.95 x10³ mbar
• Vacuum Inlet Fitting: 12.7 OD
• Dimensions (D x W x H): 17 x 6 x 9” (420 x 160 x 230 mm)
• Electrical Requirements: 115 V, 60 Hz

Specifications:

• Wavelength Range: 400-750 nm
• Photometric Range: 0.000 to 4.000 OD
• Wavelength Selection: Filters
• Photometric Resolution: 0.001 OD
• Endpoint Read Time: 5 seconds
• Minimum Kinetic Interval: 5 seconds
• Temperature Range: Ambient
• Plate Formats: 96 Well Plates
• Optical Systems:  Filters

Description:

The winning combination of output power and pricing makes X-Cite mini+ the ideal choice for routine imaging applications and HBO upgrade opportunities. X-Cite mini+ couples directly to the microscope, and while its output power surpasses even the X-Cite 120LEDBoost, it has a compact, air-cooled form factor of the X-Cite 120LEDmini.

Specifications:

• Spectral range: 360 - 700nm - coverage from DAPI to Cy5, with the following advantages:
• DAPI (UV LED) - Two models available - choose between 365nm and 385nm
• XTMS (365nm) for a closer match to arc lamp output; compatible with narrow 365 DAPI filter sets
• XTML (385nm) for use with sensitive specimens and 385 DAPI filter sets
• UV OFF Mode - built into all systems; a few clicks of the speedDIAL disables the UV LED when not required, helping to preserve sensitive samples
• TRITC/mCherry (500 - 600nm) - improved LED technology yields 60% more power in this critical wavelength range compared to X-Cite 120LEDmini
• High output power - the performance of higher-end illuminators in a lower cost system
• 3X higher output than competitive lower cost systems in TRITC, mCherry and Cy5
• Matches or exceeds the 120LEDBoost performance across the visible spectrum
• Quiet operation - similar to X-Cite 120LEDmini
• Air-cooled with compact footprint - same as X-Cite 120LEDmini
• Direct coupling to microscope - no change to optical layout, uses existing flanges    
• Environmentally-friendly – Mercury-free and zero consumables
• Long life-time - 20,000 hour (or 3 years) LED warranty
• SpeedDIAL controller - intuitive fingertip control of shuttering and intensity level
• Multiple control options - TTL / USB - compatibility with existing software drivers for easy, drop-in replacement
• Foot pedal option - for hands-free manual operation

Description:

The winning combination of output power and pricing makes X-Cite mini+ the ideal choice for routine imaging applications and HBO upgrade opportunities. X-Cite mini+ couples directly to the microscope, and while its output power surpasses even the X-Cite 120LEDBoost, it has a compact, air-cooled form factor of the X-Cite 120LEDmini.

Specifications:

• Spectral range: 360 - 700nm - coverage from DAPI to Cy5, with the following advantages:
• DAPI (UV LED) - Two models available - choose between 365nm and 385nm
• XTMS (365nm) for a closer match to arc lamp output; compatible with narrow 365 DAPI filter sets
• XTML (385nm) for use with sensitive specimens and 385 DAPI filter sets
• UV OFF Mode - built into all systems; a few clicks of the speedDIAL disables the UV LED when not required, helping to preserve sensitive samples
• TRITC/mCherry (500 - 600nm) - improved LED technology yields 60% more power in this critical wavelength range compared to X-Cite 120LEDmini
• High output power - the performance of higher-end illuminators in a lower cost system
• 3X higher output than competitive lower cost systems in TRITC, mCherry and Cy5
• Matches or exceeds the 120LEDBoost performance across the visible spectrum
• Quiet operation - similar to X-Cite 120LEDmini
• Air-cooled with compact footprint - same as X-Cite 120LEDmini
• Direct coupling to microscope - no change to optical layout, uses existing flanges    
• Environmentally-friendly – Mercury-free and zero consumables
• Long life-time - 20,000 hour (or 3 years) LED warranty
• SpeedDIAL controller - intuitive fingertip control of shuttering and intensity level
• Multiple control options - TTL / USB - compatibility with existing software drivers for easy, drop-in replacement
• Foot pedal option - for hands-free manual operation

Description:

MVE Cryo-Preservation Systems are designed for the user who needs either vapor or liquid storage. A large neck opening and stainless steel construction provides the most durable environment for your biological samples. With advanced features and storage from 4,000 vials to 56,000 vials, the MVE series is the perfect choice. The now standard “One fill, all fill” feature drives every freezer in a network to top up each time any of the network freezers calls for a fill. This helps to minimize transfer losses.

Specifications:

• Number of 1.2 ml & 2.0 ml vials: 10,400
• Number of racks (100 vials): 7 (13/2 rack)
• Number of racks (25 vials): 4 (13/2 rack)
• Total Number of racks: 11
• Number of blood bag stored (Fenwal 4R-5461): 224
• Liquid Nitrogen Capacity - liters: 158
• Power supply: 24 VDC
• Unit Dimensions:
  • Neck Opening (in/mm): 20.8/528
  • Usable Height (in/mm): 28.6/726
  • Overall Height (in/mm): 44.2/1123
  • Outside Diameter (in/mm): 22.75/579
  • Internal Diameter (in/mm): 20.8/528
• Weight Empty (lbs/kg): 242/110
• Weight Full (lbs/kg): 524/238
• Roller Base: Included

Description:

MVE Cryo-Preservation Systems are designed for the user who needs either vapor or liquid storage. A large neck opening and stainless steel construction provides the most durable environment for your biological samples. With advanced features and storage from 4,000 vials to 56,000 vials, the MVE series is the perfect choice. The now standard “One fill, all fill” feature drives every freezer in a network to top up each time any of the network freezers calls for a fill. This helps to minimize transfer losses.

Specifications:

• Number of 1.2 ml & 2.0 ml vials: 10,400
• Number of racks (100 vials): 7 (13/2 rack)
• Number of racks (25 vials): 4 (13/2 rack)
• Total Number of racks: 11
• Number of blood bag stored (Fenwal 4R-5461): 224
• Liquid Nitrogen Capacity - liters: 158
• Power supply: 24 VDC
• Unit Dimensions:
  • Neck Opening (in/mm): 20.8/528
  • Usable Height (in/mm): 28.6/726
  • Overall Height (in/mm): 44.2/1123
  • Outside Diameter (in/mm): 22.75/579
  • Internal Diameter (in/mm): 20.8/528
• Weight Empty (lbs/kg): 242/110
• Weight Full (lbs/kg): 524/238
• Roller Base: Included

Description:

MVE Cryo-Preservation Systems are designed for the user who needs either vapor or liquid storage. A large neck opening and stainless steel construction provides the most durable environment for your biological samples. With advanced features and storage from 4,000 vials to 56,000 vials, the MVE series is the perfect choice. The now standard “One fill, all fill” feature drives every freezer in a network to top up each time any of the network freezers calls for a fill. This helps to minimize transfer losses.

Specifications:

• Number of 1.2 ml & 2.0 ml vials: 10,400
• Number of racks (100 vials): 7 (13/2 rack)
• Number of racks (25 vials): 4 (13/2 rack)
• Total Number of racks: 11
• Number of blood bag stored (Fenwal 4R-5461): 224
• Liquid Nitrogen Capacity - liters: 158
• Power supply: 24 VDC
• Unit Dimensions:
  • Neck Opening (in/mm): 20.8/528
  • Usable Height (in/mm): 28.6/726
  • Overall Height (in/mm): 44.2/1123
  • Outside Diameter (in/mm): 22.75/579
  • Internal Diameter (in/mm): 20.8/528
• Weight Empty (lbs/kg): 242/110
• Weight Full (lbs/kg): 524/238
• Roller Base: Included

Specifications:

• Maximum Capacity: 81 g / 220 g
• Readability: 0.01 mg / 0.1 mg
• Repeatability: 0.015 mg / 0.05 mg
• Linearity: 0.15 mg
• Adjustment with internal weights: proFACT, fully automatic time- and temperature-controlled adjustment
• Adjustment with external weights : custom weights
• Sensitivity temperature drift: 1x10-6/°C•Rnt
• Interfaces: RS-232C
• Size of weighing pan: 78 x 73 mm
• Dimensions: 263x487x322 mm (WxDxH)
• Taring range: 0...220 g
• Minimum weigh (typical acc. USP): 21 mg
• Minimum weigh (typical, U=1%, sd=2): 1.4 mg
• Eccentric Load: 0.25 mg
• Sensitivity offset: 2.5x10-6•Rnt
• Sensitivity stability: 1x10-6/a•Rnt
• Settling Time: 2.5 s / 1.5 s
• Usable height of draft shield: 235 mm