Used Lab Equipment

Description:

The Thermo Scientific EC3000-90 Power Supply is a high voltage unit suited for most electrophoresis applications.

Specifications:

• Max Output Voltage: 3000 V
• Max Wattage: 300 W
• Max Amperage: 300 mA
• Input Voltage: 115 V
• Frequency: 50/60 Hz

The ECM 399 is an exponential decay wave electroporaton generator specifically designed to deliver the field strengths and pulse lengths required for the simple transformation of bacteria and yeast cells. In low voltage mode the ECM 399 has a limited capability for transfecting some mammalian cell lines.

Specifications:

• Power Requirements: 100 – 240VAC, 50/60Hz
• Operating Temperature: 10°C to 40°C
• Relative Humidity: 60%
• Altitude: 2000 m (operating)
• Dimensions:7 x 9.1 x 4.3 in
• Weight:2 kg (7 lbs)

Features:

• Constant voltage or constant current modes
• Single-unit increments in settings and readouts for precision and reproducibility
• Suitable for submarine, mini vertical, and standard vertical gel electrophoresis as well as semidry and mini tank blotting applications
• Recommended high voltage connectors: 4 mm with fixed insulating sheaths

Specification:

• Amperage: 400 mA
• Display Type: Digital
• Max. Pressure: 106 kPa. Maximum altitude of 2000 m
• Operating Temperature: 29.2°F to 104°F
• Wattage: 80w
• Weight: 3.8 kg
• Voltage: 5-300 V
• Timer: 1 minute to 23.59 hours
• Dimensions (H x L x W): 95mm x 21.5cm x 25cm
• Number of Jacks: 2
• Hertz: 50/60Hz

Features:

• Constant voltage or constant current modes
• Single-unit increments in settings and readouts for precision and reproducibility
• Suitable for submarine, mini vertical, and standard vertical gel electrophoresis as well as semidry and mini tank blotting applications
• Recommended high voltage connectors: 4 mm with fixed insulating sheaths

Specification:

• Amperage: 400 mA
• Display Type: Digital
• Max. Pressure: 106 kPa. Maximum altitude of 2000 m
• Operating Temperature: 29.2°F to 104°F
• Wattage: 80w
• Weight: 3.8 kg
• Voltage: 5-300 V
• Timer: 1 minute to 23.59 hours
• Dimensions (H x L x W): 95mm x 21.5cm x 25cm
• Number of Jacks: 2
• Hertz: 50/60Hz

The GE Healthcare Electrophoresis Power Supply EPS 3501 XL is a high quality, high precision and safe power supply for electrophoresis applications that require advanced programming and high voltage. EPS 3501 XL is primarily designed for techniques using programming in several phases and/or voltage gradients.

Specifications:

• Output Range: : 0–3 500 V DC, 0–400 mA,  0–200 W
• Programming Range: 35–3 500 V DC, 1–400 mA, 1–200 W
• Output Resolution: 1V, 1 μA, 0–399 μA
• Programming Resolution: 5V, 1mA, 1W
• Accuracy: 1%, +/-V; 1% +/- 1mA; 2% +/- 1W; 0.1% +/- 1 min
• Line Regulation:  < 0.2 %
• Load Regulation: < 1% at load change 10-90% of max load
• Ripple: < 1% at 3500V
• Short Term Stability: < 0.2%/year
• Long Term Stability: <1%/year
• Ambient Operating Temperature: 4 - 40C
• Ambient Operating Humidity: 0 - 95%
• Ambient Operating Pressure: 84 - 106 kPa
• Dimensions: 315 x 250 x 95 mm
• Weight: 3.8 kg

The Pharmacia Electrophoresis Power Supply EPS 500/400 is an accurately controlled power source of modern design that has been designed for safe and easy operation. The EPS 500/400 is designed to be used with the Pharmacia electrophoresis apparatuses (eg. the Gel Electrophoresis Apparatusus GE 2/4 and GE 2/4 LS, and the Flat Bed Electrophoresis apparatuses FBE Immuno and FBE 3000) or with any other suitable electrophoresis or immunoelectrophoresis chambers.

Description:

The Pharmacia Electrophoresis Power Supply EPS 3500 is a high quality, high precision and safe power supply for electrophoresis applications that require a maximum of 3500 volts. EPS 3500 is primarily designed for the following techniques: ● DNA sequencing ● IEF (Isoelectric focusing) EPS 3500 is also suitable for: ● ● ● ● ● SDS-PAGE (Polyacrylamide Gel Electrophoresis) Native PAGE Agarose electrophoresis Electroblotting DNA pulsed field electrophoresis Electrophoresis separations can be controlled by voltage, current or power. The EPS 3500 automatically switches over the controlling parameter according to programmed limits and conductivity variations in the system. Two electrophoresis units can be connected to the EPS 3500 and run with the same programmed method at one time. Three programs can be saved.

Specifications:

• Output modes: Constant voltage, current or power
• Output voltage: 1 - 600 V in 1 V steps
• Output current: 1 - 400 mA in 1 mA steps
• Output power: 1 - 100 W in 1 W steps
• Program storage: 3 programmed methods
• Time: 1 min – 500 hr
• Volthours: 1 Vhr - 500kVhr
• Power outlets: 2 pairs, recessed 4 mm high voltage
• Operating temperature: 4°-40°C
• Power Consumption: 140 W
• Mains power: 100-120/220-240 VAC, 50-60 Hz
• Dimensions (W x D x H ): 25 x 39 x 10 cm
• Weight: 4.8 kg
• Safety features: Overload/short circuit detection
• Automatic cross-over
• Automatic recovery after power failure

Specification:

• Amperage: 500mA
• Voltage (Maximum): 1200V
• Product Type: Power Supply
• Electrical Requirements: 1200V, 500mA, 300w
• Wattage: 150w

The Power Supply EV265 has a powerful, easy to operate design that is small and compact. Storing of up to 9 methods is possible and allows for data logging of electrophoresis runs of about 100 hours.

Specifications:

• Voltage: 0 – 600 +/- 2%
• Maximum Current: 500 mA
• Maximum Output: 150W
• Timer: 0 -99, 59 h
• Minimum Load Resistor: 30 ohms
• Ambient Temperature: 0 - 40°C
• Dimensions: 24 x 20 x 13 cm
• Weight: 6 kg

Description:

• Compact, benchtop, constant voltage power supply designed for gel electrophoresis. Additionally suitable for Mini-SDS-PAGE and pulse field electrophoresis applications
• Equipped with dual banana output jacks and high-low voltage switch
• 3 digit digital readout, over-current alarm (500mA), check fuse indicator

Specifications:

• Weight: 12 lbs.
• Dimensions: 9” x 6” x 6”
• Power Supply Output: 20 to 250V in 10V increments, max 300 mA (at 150V – 250V), 500 mA (below 150V)

A benchtop power supply used for providing adjustable DC power for electrophoresis applications.  Operates in constant voltage or constant current mode. Programmable run time and LED display of timer, current, and voltage. 

Specifications:

• Power: Operates up to 200V or 2.0A
• Output Voltage: Up to 500V
• Output Current: Up to 500 mA
• Output Power: Up to 250W

This power supply offers multiple choices for operating modes, either constant voltage or constant current output, with automatic crossover between modes. The automatic shutoff saves times, energy and reduces errors. Automatic recovery eliminates the need to restart the unit.

Specifications:

• Amperage: 400 mA

• Timer: 0 - 999 minutes

• Voltage: 300 V

The Invitrogen PowerEase 500 Power Supply is a microprocessor-controlled power supply for electrophoresis of pre-cast and hand-poured mini-gels. By combining high performance and programming flexibility this unit simplifies electrophoresis. This unit features: large LCD display, pre-programmed and custom methods, three step operating procedure, and a parallel port.

Specifications:

• Output Range: 1–500 V (minimum step size 1 V), 1–500 mA (minimum step size 1 mA), 0.1–50 W (minimum step size 0.1 W), Automatic crossover on reaching set limits.
• Accuracy: Voltage: ± 2% or ± 2 volts, Current: ± 2% or ± 2 mA, Wattage ± 2% or ± 0.2 watt
• Drift: < 1% in 8 hours after 30 minute warm-up with constant supply voltage
• Circuit Protection: Open Circuit; Short Circuit; Thermal Protection Over Voltage, Current, Wattage
• Safety: Load Detection, Thermal Shutoff (with optional temperature probe), Isolated Floating Ground
• Memory Control: Non-volatile, up to 24 hours, Custom Methods Stored to RAM
• Computer Interface: RS232C
• Display: LCD, view area 114 x 64 mm, 240 × 128 dots
• Dimensions (W x H x D): 16.5 cm × 18 cm × 20.5 cm
• Weight: 2.9 kg (6.4 lbs)
• Operating Environmental Conditions: Ambient temperature 4–30°C, ≤80% relative, humidity, altitude < 2000 meters, indoor use only, pollution degree

The Invitrogen PowerEase 500 Power Supply is a microprocessor-controlled power supply for electrophoresis of pre-cast and hand-poured mini-gels. By combining high performance and programming flexibility this unit simplifies electrophoresis. This unit features: large LCD display, pre-programmed and custom methods, three step operating procedure, and a parallel port.

Specifications:

• Output Range: 1–500 V (minimum step size 1 V), 1–500 mA (minimum step size 1 mA), 0.1–50 W (minimum step size 0.1 W), Automatic crossover on reaching set limits.
• Accuracy: Voltage: ± 2% or ± 2 volts, Current: ± 2% or ± 2 mA, Wattage ± 2% or ± 0.2 watt
• Drift: < 1% in 8 hours after 30 minute warm-up with constant supply voltage
• Circuit Protection: Open Circuit; Short Circuit; Thermal Protection Over Voltage, Current, Wattage
• Safety: Load Detection, Thermal Shutoff (with optional temperature probe), Isolated Floating Ground
• Memory Control: Non-volatile, up to 24 hours, Custom Methods Stored to RAM
• Computer Interface: RS232C
• Display: LCD, view area 114 x 64 mm, 240 × 128 dots
• Dimensions (W x H x D): 16.5 cm × 18 cm × 20.5 cm
• Weight: 2.9 kg (6.4 lbs)
• Operating Environmental Conditions: Ambient temperature 4–30°C, ≤80% relative, humidity, altitude < 2000 meters, indoor use only, pollution degree