Used Lab Equipment

This power supply offers multiple choices for operating modes, either constant voltage or constant current output, with automatic crossover between modes. The automatic shutoff saves times, energy and reduces errors. Automatic recovery eliminates the need to restart the unit.

Specifications:

• Amperage: 400 mA

• Timer: 0 - 999 minutes

• Voltage: 300 V

Features:

Fragment Size: 100bp-10Mb

Description:

The iBind™ is a benchtop device utilizing sequential lateral flow (SLF) to perform hands-free blocking, antibody binding, and washes for western detection workflows. The iBind™ uses no external power source, and relies on mechanical pressure from the iBind™ on a iBind™ Card to generate the sequential flow of immunodetection reagents for performing the blocking, antibody binding, and wash steps involved in western detection workflows

Specifications:

• Dimensions (L x W x H): 24.2 x 14.6 x 3.5 cm
• Material: Aluminum, plastic (PC/ABS), steel, silicone, neodymium (magnets)
• Operating Temperature: 18ËšC to 30ËšC

Bio-Rad Power Pac 300 is an electrophoresis power supply that can provide voltages from 10 to 300V. It has a current output range from 4 to 400mA and has a maximum power output of 75W. It can connect up to 4 electrophoresis cells in parallel.

Specifications:

• Max Voltage: 300V
• Max Current: 400mA
• Max Wattage: 75W

Specifications:

• Max. voltage: 3500 V (dc), ± 1750 V floating output with reference to Ground
• Max. power: 100 W
• Max. pressure cooling plate: 0.35 bar
• Dimensions: 16 x 31 x 40 cm
• Chemical resistance: The wetted parts are resistant to solvents commonly used in electrophoresis and solutions containing inorganic and organic acids, alkalis and alcohols.

Features:

• Programming in a compact, stackable case
• Timer control and constant voltage or constant current output
• Ability to pause and resume a run

Specifications:

• Timer: 1 min- 99 hr 59 min
• Display: 3 digit LED
• Dimensions:3” x 9.6” x 2.6” H

Bio-Rad Power Pac 300 is an electrophoresis power supply that can provide voltages from 10 to 300V. It has a current output range from 4 to 400mA and has a maximum power output of 75W. It can connect up to 4 electrophoresis cells in parallel.

Specifications:

• Max Voltage: 300V
• Max Current: 400mA
• Max Wattage: 75W

Features:

• Programming in a compact, stackable case
• Timer control and constant voltage or constant current output
• Ability to pause and resume a run
• Autoswitching

Specifications:

• Output range (programmable): 10–300 V, fully adjustable in 1 V steps, 4–400 mA, fully adjustable in 1 mA steps, 75 W (maximum)
• Type of output: Constant voltage or constant current with automatic crossover
• Timer: 1 min–99 hr 59 min, fully adjustable
• Display: 3-digit LED
• Operating conditions: 0–40°C, 0–90% humidity in the absence of condensation
• Input power (actual): 90–120 or 198–264 VAC, 50/60 Hz,
• Dimensions (W x L x H), cm/in: 21 x 24.5 x 6.5/8.3 x 9.6 x 2.6

Features:

• Output specifications: 250 V, 3.0 A, 300 W
• Output range (programmable):
  • 5–250 V, fully adjustable in 1 V increments
  • 01–3.0 A, fully adjustable in 0.01 A increments
  • 1–300 W, fully adjustable in 1 W increments
  • Type of output Constant voltage, current, or power with automatic crossover
• Output terminals: 4 pair recessed banana jacks in parallel
• Timer: 1 min–99 hr 59 min, fully adjustable
• Pause/resume function: Yes
• Display: 2-line, 16-character backlit LCD
• Operating conditions: 0–40°C, 0–90% humidity in the absence of condensation
• Safety compliance: EN61010
• EMI: Conforms to CE standards for emissions and immunity class A, tested only at 230 V, TÜV EMC certification
• Safety features: No-load detection, rapid resistance change detection, ground leak detection, overload/short circuit detection, overvoltage protection, overtemperature protection
• Input protection: Fuse on hot and neutral
• Input power (nominal): 100–120/220–240 VAC, autoswitching
• Stackable: Yes
• Dimensions (W x L x H), cm/in: 25 x 28.5 x 8/9.8 x 11.2 x 3.1
• Weight, kg/lb: 2.0/4.4

Specification:

• Volt range: 1 - 300 Volts; 1 Volt step
• Current range: 1 - 400 mA; 1mA step
• Power: 0.6 - 120 Watts
• Mode of operation: Continuous
• Switching frequency: 23 kHz
• Output regulation stability: ± 0,2% FS ± 1/2 digit
• Minimum output: 1 Volts; 15 µA; 0.6 Watts
• Value display accuracy: ± 0.2 FS ± 1/2 digit
• Earth leakage Detection level: 500 µA
• Output to earth impedance: 10 MΩ min bypassed by 1 nF max
• Dimensions (D x W  x H): 24 cm x 17 cm x 11 cm
• Weight: 1.8 kg
• Altitude: up to 2000 m
• Temperature: 10°C - 40°C

250 Volts and 500 milliAmps DC.  Two sets of outputs operate in parallel to provide between 20 and 250 volts, up to 500 milliamps, and up to 75 watts in the constant voltage mode.

Specifications:

• Voltage Steps, Lo Range: 20,30,40,50,60,70,80,90, I00, 110,120, 130
• Voltage Steps, Hi Range: 140,150,160,170,180,190,200,210,220,230,240,250
• Maximum Voltage: 250V
• Maximum Current: 300 mA at 150-250V, 500 mA below 150V
• Maximum Power: 75 watts
• Number of Outputs: 2
• Temperature Range: 0°C -40°C
• Dimensions: 6 x 8 x 4.5 in
• Weight: 5 lbs

Programmable power supply capable of running high voltage/low-current and high-current/low voltage applications concurrently.

Specifications:

• Dimensions: 9" L x 12" W x 13" H (in)
• Weight: 10.8 kg

Features:

The FlashGel System for fast electrophoresis of DNA is the ideal sample screening tool. Check up to 32 PCR or restriction fragments quickly without having to plan your day around agarose gels or verify your DNA sample integrity prior to downstream analysis. The FlashGel System is the fastest way to separate DNA and the best way to watch DNA migration as it happens. This revolutionary new tool separates DNA in 2 - 7 minutes. Monitor gel runs right at the bench, without UV light. The highly sensitive system allows a 5-20X reduction in DNA levels - saving both time and money.

Specifications:

• 5 minute separation and recovery

• See bands in as little as 2 minutes

• Recover samples directly without UV light band excision or purification,

• Real-time separation and documentation

• Watch band migration as it happens

• Photograph gels at the bench without DNA damaging UV light

• Outstanding sensitivity and resolution

Features:

The FlashGel Camera captures data from the FlashGel System and say goodbye to darkrooms and UV light. Complete separation and documentation safely, at your bench, in minutes. This simple digital camera in an enclosed hood connects directly to your laptop or PC via USB cable.

Specifications:

• 5 minute separation and recovery, See bands in as little as 2 minutes

• Recover samples directly without UV light band excision or purification

• Real-time separation and documentation

• Watch band migration as it happens

• Photograph gels at the bench without DNA damaging UV light

• Outstanding sensitivity and resolution

Description:

The Ettan IPGphor II from GE Healthcare is the ideal option for obtaining perfectly resolved first dimensions of 2D gels. The manufacturer claims that the system provides ‘reproducibility, reliability, speed, accuracy, high protein loading capacity, and high throughput’, and in my experience, the system really stands up to their claim. To begin with, the system is very compact and can be housed on a tabletop in any corner of the lab. It is perfectly silent and occupies little space. The system requires an ambient, dust-free operating environment; however, we keep the instrument in a well air-conditioned room. The system contains gold-plated copper electrodes that provide the necessary contact to the 1D strips for carrying out isoelectric focusing. A very high voltage is applied between the electrodes and, therefore, caution should be used while handling the instrument. As a safety feature, the electrodes are automatically switched off when anyone opens the lid of the instrument.