Used Lab Equipment

Features:

The Fisher Scientific Low Temperature 146E Incubator comes equipped with two removable shelves and three molded door shelves.

Specifications:

• Electrical: 120V, 60Hz, 9.5A, 1PH

• Temperature range: -10 to +60°C

• Refrigerant: R134A, 3.6 oz.

• Design pressure:

  High side: 300 PSIG

  Low side: 140 PSIG

• Chamber volume: 6.1 cu. ft. 

• Chamber dimensions (W x H x L): 21 x 28 x 20 in.

Features:

General purpose incubator

Specifications:

• Volts: 120
• Amps: 1.3
• Hz: 50/60

Description:

The VWR 1500E Incubator is a 1 cubic foot incubator with a temperature range of 5° above ambient to 70°C. Temperature uniformity is ±0.5° at 37°C. The VWR 1500E series was designed for routine small incubation loads utilizing gravity convection. The stainless steel chamber design minimizes heat loss while maximizing uniformity.

Specifications:

• Temperature Range: Ambient +5° to 70°C
• Temperature Uniformity: ±0.5° at 37°C
• Number of Shelves: 2
• Exterior Dimensions (W x H x D): 16 x 22 x 16 in
• Electrical Requirements: 120V, 50/60Hz, 3.0A

Specifications:

• Capacity: 2 cu. ft. volume
• Interior Dimensions,W x D x H, cm (in.):1 x 38.1 x 38.1 (15 x 15 x 15)
• Exterior Dimensions,W x D x H, cm (in.):3 x 53.3 x 63.5 (21 x 21 x 25)
• Temperature Range: 5C above ambient to 60°C
• Uniformity: ±0.25° at 37°C

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (¹/₂") increments.

Features:

• Exclusive Hybrid Heating System
• Microprocessor Control
• Easy Keypad Set and Calibration
• Over-Temperature Protection
• Access Port
• Heated Outer Door
• Interior Electrical Outlet
• Stainless Steel Interior and Shelves
• Temperature Range: 5° above ambient to 60°C
• Uniformity: ±0.25° at 37°C

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (¹/₂") increments.

Features:

• Exclusive Hybrid Heating System
• Microprocessor Control
• Easy Keypad Set and Calibration
• Over-Temperature Protection
• Access Port
• Heated Outer Door
• Interior Electrical Outlet
• Stainless Steel Interior and Shelves
• Temperature Range: 5° above ambient to 60°C
• Uniformity: ±0.25° at 37°C

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (¹/₂") increments.

Features:

• Exclusive Hybrid Heating System
• Microprocessor Control
• Easy Keypad Set and Calibration
• Over-Temperature Protection
• Access Port
• Heated Outer Door
• Interior Electrical Outlet
• Stainless Steel Interior and Shelves
• Temperature Range: 5° above ambient to 60°C
• Uniformity: ±0.25° at 37°C

An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers. The air jacket design and heated outer door allows for uniform heat throughout the incubators.  Forced air circulation offers ±0.5°C temperature uniformity, faster heat transfer and rapid temperature recovery. High gloss white interior for easy contamination detection.  Features a reinforced floor to support roller apparatus or shakers and four interior 115V outlets.

Features:

• 27 cubic Feet
• Microprocessor Temperature Control
• Over-Temperature Safety Protection
• Gentle Air Flow
• Temperature Uniformity to 0.8°C
• 4 Interior Electrical Outlets
• Prewired Access Panel for Chart Recorder
• Exterior Dimensions: W x D x H, (in.): 36 x 34 x 74
• Interior Dimensions:  30 3/4 x 25 x 63

The VWR Signature Reach-In Incubators are supplied with six shelves capable of supporting the weight of benchtop instruments. The air jacket design and heated outer door allows for uniform heat throughout the incubators. They incorporate a microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers.
Specifications:

• Exterior Dimensions: 41 x 32 x 88 in

• Interior Dimensions: 35 x 26 x 76 in

• Power Requirements: 120V, 50/60Hz, 16A

• Temperature Range: 5° above ambient to 70°C

• Volume: 40 cubic feet

• Carbon Dioxide Range: 0 - 20%

The VWR Signature Reach-In Incubators are supplied with six shelves capable of supporting the weight of benchtop instruments. The air jacket design and heated outer door allows for uniform heat throughout the incubators. They incorporate a microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers.
Specifications:

• Exterior Dimensions: 41 x 32 x 88 in

• Interior Dimensions: 35 x 26 x 76 in

• Power Requirements: 120V, 50/60Hz, 16A

• Temperature Range: 5° above ambient to 70°C

• Volume: 40 cubic feet

• Carbon Dioxide Range: 0 - 20%

The VWR Signature Low Temperature Incubator is commonly used for applications such as B.O.D. determinations, plant and insect studies, fermentation studies, and bacterial culturing. It offers a digital display of temperature, an easy keypad for setting calibration, gentle forced air circulation and contains CFC-free refrigerant.

Specifications:

• Power Requirements: 120V, 50/60Hz, 400W

• Exterior Dimensions: 24 x 21 x 33.8 in (61.0 x 53.4 x 85.8 cm)