Used Lab Equipment

2 ft. DuraLab Fume Hood

The adaptable OptimaTM fume hood allows for personalized ergonomics, changing lab processes and
is designed to meet demanding safety standards. With its sleek and stylish design the OptimaTM fume
hood brings versatility to a whole new level. Suitable for use in either Constant Air Volume or Variable
Air Volume applications.

Features:

4 foot Biosafety Hood

Specifications:

• Sash opening: 8”
• Electrical: 115V, 15A
• Sash angle: 10°

2 ft Purifier Vertical Clean Bench

Specifications:

• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Disposable prefilter
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions
• Two utility ports with iris openings and plugs
• ETL Listing (115 volt, 60 Hz models)

PuriCare Open Access Station (transfer station)

Features

• Generous work surface area to accommodate standard rodent cages
• Electric hydraulic lift for infinite height adjustment from 36.5" to 47" with the push of a button
• Recessed and angled sashes for closer viewing without glare
• Large 14" high sash openings to accommodate various cage sizes with brakes
• Large 5" diameter, non-marking polyurethane casters
• Two 99.99% efficient HEPA filters to trap allergens
• Nominal downflow velocity of 55 fpm.
• Economical, disposable upper and lower prefilters
• Variable speed motor/blower and impellers
• Particulate-free ISO Class 5 (formerly Class 100) air
• Retractable, safety orange, top right-side mounted power cord, 28' (9 m) on 115 volt model
• Two push/pull bars on the right hand side to facilitate transport
• Two 32-watt fluorescent lights
• Two easy-to-read, ADA-compliant Minihelic pressure gauges
• ADA-compliant light and blower switches
• ADA-compliant electrical duplex
• Single pass airflow design with no recirculation through the enclosure helps prevent heat stress and odor build up.
• Type 304 stainless steel dished work surface
• Exterior is durable glacier white and slate gray epoxy-coated steel
• Full three year warranty on parts and labor
• ETL listed (115 volt models)
• CE Conformity Mark (230 volt models)

Description:

Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Because they do not provide protection to the user, they should not be used in conjunction with biohazardous material, toxins or radionuclides.

Specifications:

• Weight: 125.0 lbs (57.0 kg)
• Dimensions (W x D x H): 24" x 28.6" x 36.8"
• Electrical: 115 volts, 60 Hz, 5 A
• Laminar Flow: Vertical
• Nominal Width: 2'
• Conformance: CAN/CSA C22.2, UL, UL Standard 3101-1/61010-1
• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions

Features:

• 4 ft. DuraLab Fume Hood
• Table top fume hoods

Features:

Erlab Captair 4000 C Ductless Filtering Fume Hood

Specifications:

• Processed air flow: 230 m3/h
• Air velocity at the openings in working position: 0,4 to 0,6 m/s
• Dimensions (H x W x D): 1256 x 800 x 630 mm
• Internal dimensions (H x W x D): 866 x 764 x 543 mm

Features:

• Personnel, Product, and Environmental Protection
• True Laminar Airflow
• 100% Exhaust
• Sliding Window
• One Electrical Duplex Outlets (Front Left Faring)
• Gas Service Petcock (Right Side Wall)

Description:

An FS4700 series fan box consists of a motorized impeller installed in a housing with a variable speed controller. The housing is designed to fit over a HEPA filter on the inlet side and is equipped on the discharge side with a single outlet.

Features:

• Interior Dimensions: 35.5” W x 28″ D x 32″ H
• Efficient Particle: 0.3 micron
• Protection from Radioisotopes, bacteriological and carcinogenic agents
• Paticulate air HEPA filter 99.99% Efficient

Paramount filtered enclosures are self-contained work stations that use carbon filters to remove unsafe concentrations of organic solvents, formaldehyde, acid gases or ammonia from the work area. Contaminants released within the enclosure are drawn through a rear baffle, diluted with air and adsorbed onto or treated by a carbon filter.

Specifications:

• Glacier white epoxy-coated aluminum frame, airfoil, back panel, baffle, and upper cabinet.
• 3/16” thick tempered safety glass sides
• Dimensions:  36 W x 29 D x 58 3/8, inches
• Electrical Requirements:  115V, 60 Hz, 3 amps

Description:

• Designed to duct to the outside from one of four exhaust connections.
• For use with remote blower.
• Adjustable baffle.
• Pre-wired for operation on 115 volts, 60 Hz, 15 amps.
• 8', three-wire cord with plug.
• Three each 3.25" x 10" exhaust connections located on the top and both sides.
• 6" nominal diameter exhaust connection located on the back.
• Static pressure loss does not exceed .28" H2O at 50 fpm (167 CFM).

Features:

The La Petite Glove Box is comprised of essentially two components. The top and bottom are sealed using a revolutionary new gel used in the clean room industry. The unit is only two-thirds the size of the "Basic Glove Box", (818-GB).

Specifications:

• ID: 31.5 w x 25.5 d x 21.5"h, 80 x 65 x 55 cm
• OD: 49 w x 29 d x 22" h, 124,5 x 74 x 56 cm (widths include transfer chamber)
• Volume: 9.5 cu. Ft., 269 L
• Optically clear, one piece formed top is unbreakable.
• Bright white one piece bottom formed out of high temperature Noryl has "easy clean" corners.
• Gel Sealant.
• Stainless steel clamps have security locking features.
• Large access door (12" opening)
• Four ground key-cock valves for purging and gas entry.
• Adjustable Rh gauge.
• "Weathertite" duplex electrical outlet with safety covers.
• Transparent vacuum capable transfer chamber 12" long x 9.75" ID.
• White leveling plate for transferring liquids.
• All stainless steel clamps are adjustable.
• Vacuum gauge on transfer chambers.

Features:

Simple glove box used for general isolation and / or containment. Units are useful for isolating sensitive research studies from a hostile exterior environment. These economical units are compact, portable, lightweight and self-contained.

Specifications:

• Interior Dimensions: 41"w x 28"d x 26"h, 104 cm x 71cm x 66cm
• Exterior Dimensions: 55"w x 35"d x 27"h, 140 cm x 89 cm x 68.5 cm (Widths include transfer chamber)
• Volume: 200 pounds
• Optional vacuum pump: 800-PUMP
• Optically clear, one piece acrylic top.
• Matched die molded thermoset, bright white bottom (818-GB only).
• Coved, easy to clean corners with no hidden dark spots.
• Double layered, closed cellular neoprene gasketing system.
• Ambidextrous, white Hypalon gloves for superior chemical and U.V. resistance.
• Adjustable vacuum gauge on transfer chamber. Four ground key cock valves for purging.
• White leveling tray for transferring liquids through the transfer chamber.
• Stainless steel "0" rings for gloves.
• Transparent transfer chamber 12" long by 11" diameter (Interior Dimension).
• All clamps fully adjustable to compensate for wear.
• Hospital grade multiple electrical outlet strip U.L.-C.S.A. approved 110-120 volt U.S.A. (220-240 volt export).