Used Lab Equipment

VWR Digital Dry Block Heaters are ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a wide variety of other lab procedures.

Features:

• Environmentally Preferable Attribute
• Exceptional temperature uniformity and accuracy (±0.1°C)
• Hold interchangeable, modular heating blocks
• Heat to 120°C (248°F)
• Optional external temperature probe
• LED display

VWR Digital Dry Block Heaters are ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a wide variety of other lab procedures.

Features:

• Environmentally Preferable Attribute
• Exceptional temperature uniformity and accuracy (±0.1°C)
• Hold interchangeable, modular heating blocks
• Heat to 120°C (248°F)
• Optional external temperature probe
• LED display

Features:

 Fisher Isotemp Hybridization Incubators are designed to process nucleic and protein blots derived from hybridization procedures. Incubator heat is accurately controlled to precisely maintain the chamber temperature. Temperature can be set between slightly above ambient and 85°C and is easily set by simple controls on the front panel. A large, bright display shows actual temperature during operation. The incubator features keypad protection, which prevents the set temperature from being changed. This is useful when setting up a processing program where the unit will be unattended. An offset temperature can be programmed to compensate for the actual temperature inside a typical sample loaded into the tubes. 

Specifications:

• Power Requirements:100 VAC ±10%,50/60 Hz, 120 VAC ±10%, 60 Hz, 230 VAC ±10%, 50/60 Hz
• Small/medium unit: 3.4 A @ 120 VAC, 1.8 A @ 230 VAC
• Dual unit: 6.8 A @ 120 VAC, 3.6 A @ 230 VAC
• Ambient conditions:+16 to 40°C, up to 90% relative humidity, non-condensing
• Temperature range:Ambient +7 to 85°C
• Average uniformity: ±0.5°C at 55°C within the chamber; ±0.25°C at 55°C sample to sample
• Heat-up time: 20 minutes from ambient to 65°C
• Rotisserie speed: 5-15 rpm
• Maximum altitude: 2000 m
• Over-voltage category: II (IEC 664)
• Pollution degree: 2 (IEC 664)
• Exterior dimensions W x L x H (nominal) : Small: 18 x 16.5 x 17 inches (46 x 42 x 44 cm) 
• Weight: Small: 45 lbs (21 kg)

The VWR 13259-005 heat block is a multipurpose, compact, constant-temperature heater. Applications include culture incubation and activation, enzyme reactions, and blood urea nitrogen determinations.
Specifications:

• Temperature Range: Ambient to 130°C

• Block Sizes: Fits Blocks of 3 x 3.875 in

• Power Requirements: 120V, 50/60Hz, 100W

Features:

The Fisher Scientific Low Temperature 146E Incubator comes equipped with two removable shelves and three molded door shelves.

Specifications:

• Electrical: 120V, 60Hz, 9.5A, 1PH

• Temperature range: -10 to +60°C

• Refrigerant: R134A, 3.6 oz.

• Design pressure:

  High side: 300 PSIG

  Low side: 140 PSIG

• Chamber volume: 6.1 cu. ft. 

• Chamber dimensions (W x H x L): 21 x 28 x 20 in.

Features:

General purpose incubator

Specifications:

• Volts: 120
• Amps: 1.3
• Hz: 50/60

Description:

The VWR 1500E Incubator is a 1 cubic foot incubator with a temperature range of 5° above ambient to 70°C. Temperature uniformity is ±0.5° at 37°C. The VWR 1500E series was designed for routine small incubation loads utilizing gravity convection. The stainless steel chamber design minimizes heat loss while maximizing uniformity.

Specifications:

• Temperature Range: Ambient +5° to 70°C
• Temperature Uniformity: ±0.5° at 37°C
• Number of Shelves: 2
• Exterior Dimensions (W x H x D): 16 x 22 x 16 in
• Electrical Requirements: 120V, 50/60Hz, 3.0A

Specifications:

• Capacity: 2 cu. ft. volume
• Interior Dimensions,W x D x H, cm (in.):1 x 38.1 x 38.1 (15 x 15 x 15)
• Exterior Dimensions,W x D x H, cm (in.):3 x 53.3 x 63.5 (21 x 21 x 25)
• Temperature Range: 5C above ambient to 60°C
• Uniformity: ±0.25° at 37°C

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (¹/₂") increments.

Features:

• Exclusive Hybrid Heating System
• Microprocessor Control
• Easy Keypad Set and Calibration
• Over-Temperature Protection
• Access Port
• Heated Outer Door
• Interior Electrical Outlet
• Stainless Steel Interior and Shelves
• Temperature Range: 5° above ambient to 60°C
• Uniformity: ±0.25° at 37°C

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (¹/₂") increments.

Features:

• Exclusive Hybrid Heating System
• Microprocessor Control
• Easy Keypad Set and Calibration
• Over-Temperature Protection
• Access Port
• Heated Outer Door
• Interior Electrical Outlet
• Stainless Steel Interior and Shelves
• Temperature Range: 5° above ambient to 60°C
• Uniformity: ±0.25° at 37°C

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (¹/₂") increments.

Features:

• Exclusive Hybrid Heating System
• Microprocessor Control
• Easy Keypad Set and Calibration
• Over-Temperature Protection
• Access Port
• Heated Outer Door
• Interior Electrical Outlet
• Stainless Steel Interior and Shelves
• Temperature Range: 5° above ambient to 60°C
• Uniformity: ±0.25° at 37°C

An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers. The air jacket design and heated outer door allows for uniform heat throughout the incubators.  Forced air circulation offers ±0.5°C temperature uniformity, faster heat transfer and rapid temperature recovery. High gloss white interior for easy contamination detection.  Features a reinforced floor to support roller apparatus or shakers and four interior 115V outlets.

Features:

• 27 cubic Feet
• Microprocessor Temperature Control
• Over-Temperature Safety Protection
• Gentle Air Flow
• Temperature Uniformity to 0.8°C
• 4 Interior Electrical Outlets
• Prewired Access Panel for Chart Recorder
• Exterior Dimensions: W x D x H, (in.): 36 x 34 x 74
• Interior Dimensions:  30 3/4 x 25 x 63