We offer an assortment of items that does not fall under the rest of the categories. This section contains items ranging from Capillary Electrophoresis, Microarray Scanners, to pH meters and Orbital Shakers. If there is an item you do not see that you are looking for, please send us a request and we will be sure to help.
The HI2550 is a rugged and highly accurate multiparameter benchtop meter that measures pH/ORP, EC/TDS/Salinity, and temperature with a clear LCD display, data logging capability, and USB port for computer connectivity.
The HI2550 is a dual channel meter that allows for measurement of pH and ORPE on one channel and EC, TDS, and salinity, on the other. Readings for pH and EC can be manually or automatically compensated for temperature variations with the separate HI7662 temperature probe or from the built-in temperature sensor of the conductivity probe on channel two.
As a pH meter, the HI2550 can be calibrated up to five points with a choice of seven standard buffers or two custom buffers. As an EC/TDS/Salinity meter, the HI2550 can be calibrated at one point for offset and at one point for slope with a choice of six conductivity standards. The % NaCl is calibrated to a single point at 100% with the optional HI7037 salinity standard. The calibration data including date, time, standards used, offset, slope, cell constant, and cell factor can be accessed at any time by pressing the dedicated GLP button.
HYDRIM L110W G4 washer has a 10 full-size cassette capacity and will allow offices to turnover 2500 thoroughly cleaned instruments in a 10 hour day.
Under the counter stericentre installation with furniture available for specialized set-ups. HIPTM cleaning solution is stored in the unit, no extra storage space required
Time saved using automated washing compared to manual cleaning is approximately 1 hour of labour for every nine procedural set-ups.1
Height, freestanding: 850 mm / 33.5"
Height, built-in: 830 mm / 32.75"
Width: 600 mm / 23.75"
Depth: 600 mm / 23.75"
Depth with door open: 1200 mm / 47"
Weight: 80 kg / 176 lbs.
Running Noise: 60 dB(A)
Hot and cold water connections: 3/4”
Inlet water pressure: 1-10 bar/14.5-145 psi
Incoming hot water temperature: 50-70°C / 122-158°F
Water softener: 1 kg / 2.2 lbs salt capacity
Drying System: Heater 1 kW
Electrical Connection: 208-240 V 60 Hz 15 A
Equipment pollution degree: Pollution Degree 2
Equipment installation category: Installation category II
Maximum relative humidity: 80% for temp up to 31°C / 88°F
50% for temp up to 40°C / 104°F
Operating temperature range: -5°C to 40°C / 23-104°F
Max. altitude: 2000m / 6561.7 ft.
Mains supply: + / -10% of nominal
The iBind™ is a benchtop device utilizing sequential lateral flow (SLF) to perform hands-free blocking, antibody binding, and washes for western detection workflows. The iBind™ uses no external power source, and relies on mechanical pressure from the iBind™ on a iBind™ Card to generate the sequential flow of immunodetection reagents for performing the blocking, antibody binding, and wash steps involved in western detection workflows
The ICS-900 is an integrated, single-channel ion chromatography system designed to run specific isocratic anion and cation applications. The system uses MMS 300 membrane suppression with Displacement Chemical Regenerationt (DCR) technology for low noise and stable baselines. Each ICS-900 system has an all-polymeric flow path with a reliable dual piston pump, high-pressure pulse damper, electrically actuated PEEK valve, and a temperature-controlled conductivity cell.
Impulse heat sealers are a compact and convenient way to seal most sizes of polypropylene and polyethylene bags.
The LASOS® Ar-Ion lasers cover a broad spectrum in the blue and green spectral range, with emission lines from 454 nm to 514 nm, in single-wavelength and multiwavelength versions with output powers up to 225 mW. For photo printing applications in the AGFA d-lab.2 and d-lab.3 printers, a dual line laser with emission at 454/ 458 nm and 514 nm has been developed, showing an excellent beam quality, beam pointing stability and long-term stability with low-noise operation. All laser tubes have an internal mirror, vacuum-tight hard-sealed and integrated resonator construction optimizing the life time and power stability. The laser mirrors are adjusted and fixed by a special, proprietary technology providing maintenance-free operation and no need for readjustment in the field. The LASOS laser modules are compact, economical and are available with several cooling options. All laser models can be provided with OEM power supplies, designed to meet the European and American standards with availability of approvals and certificates CDRH, IEC, CSA, CE, TÜV, UL.
Pipetting all 96 wells at once simplifies micro-volume applications like ELISA, cellular assays, qPCR and protein crystallization. With greater accuracy and precision, Mettler Toledo’s Rainin Liquidator 96 streamlines any 96-well or 384-well plate application. It is compact, requires no electricity and comes in two volume ranges – 0.5 to 20 uL and 5 to 200 uL. And because it is a manual device, Liquidator 96 is easy to use and requires virtually no training.
The MultiMACS M96 Separator is a compact benchtop instrument capable of parallel processing of 8-96 samples in proteomics and molecular biology applications. It can be run either manually, semi-automated or fully automated when integrated into a liquid handling system. The instrument works in combination with a wide range of MultiMACS Kits which are developed to isolate highly pure molecules such as epitope-tagged proteins and their interaction partners or protein complexes, mRNA, specific nucleic acid sequences, and HIV-1.