Used Lab Equipment

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation for LC systems.

The specially-designed thermostattable sample trays holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials.

The autosampler thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray. In cooling mode condensation is generated on the cooled side of the Peltier elements. This condensed water is safely guided into the leak system.

Specifications:

• Weight: 20.7 kg (46 lbs)
• Dimensions (width × depth × height): 140 × 345 × 435 mm (5.5 × 13.5 × 17 inches) 
• Line voltage: 100 – 240 VAC, ± 10%
• Line frequency: 50 or 60 Hz, ± 5%
• Power consumption: 260 VA / 210 W / 717 BTU
• Ambient operating temperature: 4 – 55 °C (41 – 131 °F)  
• Ambient non-operating temperature: -40–70 °C (-4–158 °F)
• Humidity: < 95%, at 25–40 °C (77–104 °F)
• Operating Altitude: Up to 2000 m (6500 ft)
• Non-operating altitude: Up to 4600 m (14950 ft)
• Temperature range: setable from 4 °C to 40 °C in 1 ° increments 
• Temperature accuracy at ambient temperatures < 25 °C and humidity < 50%: - 1°C to + 4 °C at a setpoint of 4 °C
• Temperature accuracy at ambient temperatures > 25 °C and/or humidity > 50%: - 1°C to + 5 °C at a setpoint of 4 °C 

Specifications:

• Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  • 900 µl in 0.1 µl increments (recommended 1 µl increments)
  • Up to 1800 µl with multiple draw (hardware modification required)
  • Up to 5000 µl with multiple draw (hardware modification required)
• Replicate injections: – 99 from one vial
• Precision:
  • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
  • Typically < 1% RSD of peak areas from 2000 – 5000 µl
  • Typically < 3% RSD of peak areas from 1 – 5 µl
• Minimum sample volume:
  • µl from 5 µl sample in 100 µl microvial
  • 1 µl from 10 µl sample in 300 µl microvial
• Sample viscosity range: 0.2 – 50 cp
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s, depending on draw speed and injection volume

The VWR 200 Mini-stirrer is a compact educational stirrer featuring a durable cast aluminum top plate. Powerful motor and magnet deliver reliable and consistent stirring.

Features:

• Capacity: 1000mL of water.
• Adjustable Electronic speed control: 100 to 1200rpm
• Built-in support rod holder with locking knob allows a 1.27cm (1/2") rod (not included) to be directly attached to the unit.
• Plate Dimensions: 4"W x 6.25"D

This osmometer provides accurate measurements for clinical, industrial, and research applications. The unit features automated sample handling of up to 20 samples at once and on-board statistical analysis (mean, standard deviation, and coefficient of variation functions). An integral microprocessor automatically makes calibration adjustments at the push of a button.

Specifications:

• Range: 0–2000 mOsm/kg H2O
• Electrical: 100 to 240V, 50/60Hz, 80W
• Resolution: 1 mOsm/kg H2O
• Repeatability: ±3 mOsm/kg H2O (1 S.D.) between 0 and 400 mOsm/kg H2O; ±0.75% mOsm/kg H2O (1 S.D.) between 400 and 2000 mOsm/kg H2O
• Sample Volume: 20 µL
• Relative Humidity: 30 to 80% (non-condensing)
• Test Time: 90 sec. per sample (typical)
• Dimensions: 40.6W x 31D x 25.1H cm (16 x 121/4 x 97/8")
• Linearity: \<1% from straight-line between 50 and 850 mOsm/kg H2O; \<1.5% above 850 mOsm/kg H2O
• Temperature: 18 to 35°C (64 to 95°F)

Specifications:

• Electrical
  • Power Requirement: 100 to 130 VAC (60 Hz) or 200 to 250 VAC (50 Hz)
  • Fuses (2): 250V time delay (Type T): 2-Amp (100-130 VAC), 1-Amp (200-250 VAC)
  • Power Consumption: 150 watts
  • Memory Backup: Integral lithium cell; 10 years typical
• Sample Volume: 0.20 to 0.25 mL
• Sample Capacity: Single sample
• Readout: 20-character digital display
• Units: mOsm/kg H2O
• Ranges:
  • Low: 0 to 2000 mOsm/kg H2O
  • High: 1400 to 4000 mOsm/kg H2O
• Resolution: 1 mOsm/kg H2O
• Communications: DTE RS-232C, parallel printer, barcode
• Performance at Reference Conditions
  • Linearity: Less than ±0.5% from straight line
  • Repeatability: 0 to 400 mOsm ±2 mOsm/kg (1 S.D.)  400 to 4000 mOsm ±0.5% (1 S.D.)
  • Drift: Less than 1 digit per month
• Performance Over Reference Conditions
  • Temperature Effect: 1 digit for every 5°C (9°F) ambient temperature change
  • Operating Conditions Temperature:
    • 18°C to 35°C (64°F to 95°F)
    • Humidity: 5 to 80% R.H. (non-condensing)
      • Storage Temperature: - 40°C to +45°C (-40°F to +113°F)
    • Start-up Time: From Stand-By: immediately
    • From Power On: under 5 minutes
    • Test Time: Approximately 2 minutes per sample in 0 to 2000 mOsm range; moderately longer in high range.
    • Dimensions
      • 0 cm x 32.0 cm x 42 cm
      • (11.5" H x 12.5" W x 16.5" D)
      • Height With Head Up: 41 cm (16" H)
    • Weight
      • Net: 12 kg (27 lbs.)
      • Shipping: 18 kg (38 lbs.)

A fully automated, multi-sample osmometer that sets the new benchmark for analytical performance, ease of use, and true walkaway operation

Specifications:

• Sample Test Volume: 100 µL
• Aspirated Sample Volume: 150 µL
• Sample Capacity: 20-sample carousel
• Test Time: Less than 3 minutes
• Sample Throughput: Can process 20 samples in less than 1 hour
• Units: mOsm/kg H2O
• Calibrated Range: Low: 0 to 2000 mOsm/kg H2O; Full: 0 to 4000 mOsm/kg H2O
• Resolution: 1 mOsm/kg H2O
• Calibration: 3-point calibration for low range, 4-point for full range
• Communications: Onboard printer, 10/100Mbps Ethernet, 4 USB 1.0/1.1/2.0, integrated bar code scanner 
• Accuracy*: 0 to 400 mOsm: mean value ≤2 mOsm/ kg H2O from nominal value 400 to 4000 mOsm: mean value ≤0.5% from nominal value
• Precision*(within run): Standard deviation ±2 mOsm/kg H2O between 0 and 400 mOsm; standard deviation ± 0.5% of value between 400 and 4000 mOsm
• Drift*: Less than 1 mOsm/kg H2O per month 
• Temperature Effect**: Recalibration recommended for ambient temperature changes of 5°C (9°F) or greater
• Storage Temperature: -40°C to +45°C (-40°F to +113°F)
• Sample Viscosity: Up to 20 mPa•s (20 cP), higher viscosities may affect pipettor accuracy
• Pipettor Accuracy: <1%
• Electrical Voltage: 100-240 V AC (50-60 Hz)
• Power Consumption: 375 W
• Dimensions(D x W x H): 20.5” x 23.6” x 22.8” , (52 cm x 60 cm x 58 cm)
• Net Weight: 68 lb (31 kg)

* Performance at Reference Conditions — 20°C to 25°C (68°F to 77°F); 40% to 60% relative humidity; tolerances of reference or calibration solutions excluded

** Operating Conditions — 18°C to 35°C (64°F to 95°F); 5% to 80% relative humidity (noncondensing)

The first ever serological pipet controller that also allows users to aliquot with the press of a single button.

Specifications:

• Dimensions: 7.2’’ x 7.0’’ x 2.2’’ (18.3 cm x 17.8 cm x 5.6 cm)
• Weight: 340g
• Volume Capacity: Accepts 1 to 100 mL serological pipets Pipet 

• Mains/ power supply:
  • Input Voltage = 100-240 VAC
  • Frequency = 50-60 Hz
  • Input Current = 190-320 mA
  • Output Voltage = 5V
  • Output Current = 2 A 

• Rechargeable Battery:
  • Type = Lithium-Polymer Voltage = 3.7V
  • Capacity = 1100 mAh
  • Charging Time = ~ 3 hr
  • Number of Dispenses = ~2000 dispenses (with a 25mL pipet)

This LCMS brings you the best in quantitative sensitivity and robustness to expand upon the experiments going beyond MRM, and give you substantial improvements in data quality.

Includes:

• AB Sciex 4500 LC/MS/MS
• Shimadzu Prominence 20 UFLC  
• Shimadzu DGU-20A3 Degasser
• (2)Shimadzu LC_20AD Liquid Chromatograph
• Shimadzu CTO-20AC Column Oven
• Shimadzu SIL-20AC UFLC
• Windows 7 Computer Loaded with Analyst 1.6 Software       

Specifications:

• Sensitivity MRM: mode Reserpine 200 fg on column S/N > 2000  C.V. < 5%
• Maximum scan speed: 12,000 Da/sec
• Polarity switching time: 50 msec, in MRM and scheduled MRM (sMRM) modes
• Minimum MRM dwell time: 1 msec
• Mass range (m/z): 5-2000
• Cross talk for reserpine 609/195: <0.5% cross talk detectable with 2 msec dwell time and 3 msec inter-MRM pause time
• Triple quadrupole mass stability: 0.1 Da over 24 hours
• Scan types: Full scan MS and selected ion MS for both Q1 and Q3, product ion scan, precursor ion scan, neutral loss or gain scan, multiple reaction monitoring (MRM), and scheduled MRM (sMRM)
• Detector type: AcQuRate Pulse Counting CEM
• Dynamic range: 4 orders of magnitude
• Ionization sources: Turbo V source housing with TurboIonSpray probe or APCI probe.
• Maximum temperature: 750ºC
• Flow rate compatibility: 5 μL/minute to 3 mL/minute
• Power: 208V 50/60Hz AB Sciex 4500, 208V Vacuum Pump, 208V Peak N2 Generator, 115V Shimadzu UPLC
• Dimensions: 37" x 33" x 55" Sciex 4500
• Weight: 250lbs

 Includes One Year Service Contract, PM at 6 Months, and Installation

The AB SCIEX QTRAP 5500 System is a high sensitivity, bench top hybrid triple quadrupole-Linear Accelerator trap mass spectrometer designed for LC/MS/MS analyses. This instrument provides an uncompromised combination of Linear Accelerator trap and triple quadrupole functionality, uniquely allowing both  qualitative and quantitative analyses to be carried out in a single experiment.

Includes:

• AB Sciex 5500 Qtrap LC/MS/MS
• Agilent 1200 HPLC System
  
  • Agilent G1322A Degasser
  • Agilent G1311A Quat Pump
  • Agilent G1315D DAD (Diode Array Detector)
• Solvent Tray
• Computer Loaded with Analyst 1.6 Software       

Specifications

• Sensitivity MRM mode Reserpine: 50 fg on column S/N > 2000
• V.: < 5%
• Triple quad scan speed: 12,000 Da/sec
• Linear ion trap scan speed: 20,000 Da/sec
• Polarity switching time: 50 msec
• Minimum MRM Dwell Time: 1 msec
• Triple quad mass range (m/z): 5-1250
• Linear ion trap mass range (m/z): 50-1000
• Cross talk for Reserpine 609/195: No significant cross talk detectable with 1 msec dwell time and 3 msec inter-MRM pause time
• Triple quadrupole mass stability: 0.1 Da over 24 hours
• Scan types: Full scan MS and selected ion for both Q1 and Q3, product ion scan, precursor ion scan, neutral loss or gain scan, multiple reaction monitoring (MRM), enhanced MS scan, enhanced product ion scan, enhanced resolution scan, MS  scan, MRM3 scan, and TripleTrap scan modes

Includes One Year Service Contract, PM at 6 Months, and Installation

The AB SCIEX QTRAP 5500 System is a high sensitivity, bench top hybrid triple quadrupole-Linear Accelerator trap mass spectrometer designed for LC/MS/MS analyses. This instrument provides an uncompromised combination of Linear Accelerator trap and triple quadrupole functionality, uniquely allowing both  qualitative and quantitative analyses to be carried out in a single experiment.

Includes:

• AB Sciex 5500 Qtrap
• Shimadzu Prominence 20 UFLC  Shimadzu
  • Shimadzu DGU-20A3 Degasser
  • (2)Shimadzu LC_20AD Liquid Chromatograph
  • Shimadzu CTO Column Oven
  • Shimadzu CBM-20A Communication Module
  • CTC Autosampler
  • Computer Loaded with Analyst 1.6 Software       

Specifications

• Sensitivity MRM mode Reserpine: 50 fg on column S/N > 2000
• V.: < 5%
• Triple quad scan speed: 12,000 Da/sec
• Linear ion trap scan speed: 20,000 Da/sec
• Polarity switching time: 50 msec
• Minimum MRM Dwell Time: 1 msec
• Triple quad mass range (m/z): 5-1250
• Linear ion trap mass range (m/z): 50-1000
• Cross talk for Reserpine 609/195: No significant cross talk detectable with 1 msec dwell time and 3 msec inter-MRM pause time
• Triple quadrupole mass stability: 0.1 Da over 24 hours
• Scan types: Full scan MS and selected ion for both Q1 and Q3, product ion scan, precursor ion scan, neutral loss or gain scan, multiple reaction monitoring (MRM), enhanced MS scan, enhanced product ion scan, enhanced resolution scan, MS  scan, MRM3 scan, and TripleTrap™ scan modes

Specification:

• Eyepiece: Pl 10x / 25
• Dimensions (W x D x H): Axio Imager stand, manual with HBO 100 - approx. 300 mm x 721 mm x 505 mm
• Weight: approx. 18 to 30 kg dependent on equipment and accessories

• Storage condition

• Permissible ambient temperature: +10 to +40°C
• Permissible relative humidity (no condensation): max. 75% at 35 °C

• Operation

• Permissible ambient temperature: +10 to +40°C
• Permissible relative humidity (no condensation): max. 75% at 35 °C
• Atmospheric pressure: 800 hPa to 1060 hPa
• Altitude: Max. 2000 m
• Pollution degree: 2
• Operating environment: Closed room
• Protection class: I
• Protection type: IP 20

Features:

• 8 position closed microtube rotor
• Electronic safety brake on lid opening for user safety
• Digital display
• Starts and stops in seconds
• Lid safety interlock
• Smooth and silent, discreet running
• User calibration feature
• Small footprint; can fit easily on to a crowded countertop
• Interchangeable rotors
• Low voltage power consumption

Specifications:

• Maximum Speed: 6,000 RPM
• Speed Type:Fixed speed 6,000 RPM
• Max RCF: 2000 x g
• Speed Accuracy: +/- 100 RPM
• Size (LxWxH): 162 x 154 x 116 mm
• Weight: 1.1 Kg
• Input Voltage: 100 - 240 VAC, 50 / 60 Hz
• Output Voltage: 24V DC, 1.5A
• Power Consumption:15 W
• Operating Conditions: Works in 80% humidity and in temperature of 400C

Features:

• 8 position closed microtube rotor
• Electronic safety brake on lid opening for user safety
• Digital display
• Starts and stops in seconds
• Lid safety interlock
• Smooth and silent, discreet running
• User calibration feature
• Small footprint; can fit easily on to a crowded countertop
• Interchangeable rotors
• Low voltage power consumption

Specifications:

• Maximum Speed: 6,000 RPM
• Speed Type:Fixed speed 6,000 RPM
• Max RCF: 2000 x g
• Speed Accuracy: +/- 100 RPM
• Size (LxWxH): 162 x 154 x 116 mm
• Weight: 1.1 Kg
• Input Voltage: 100 - 240 VAC, 50 / 60 Hz
• Output Voltage: 24V DC, 1.5A
• Power Consumption:15 W
• Operating Conditions: Works in 80% humidity and in temperature of 400C

Description:

The BEING Vacuum Ovens over a variety of sizes to fit the different needs of each of our customers. Due to our excellent design, the BEING vacuum oven offers more usable space then similarly sized ovens from the competition. A large viewing window allows the user to quickly view their samples from a distance. The BEING controller offers superior temperature control and safety for our customers with a large colored LCD display for easy viewing.

Features:

• Colorful LCD display.
• Real-time display of measured vacuum helps user monitor progress of the drying sample
• Inert Gas Inlet
• Interior Chamber made from 304 stainless steel with a mirror polished finish making for easy cleaning
• Adjustable shelves for added flexibility to accommodate various size containers
• Exhaust valve switching and pump switch come with an electromagnetic valve controller which is safe and reliable.
• User friendly and reliable operation while at the same time conserving vacuum pump power
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Chamber Volume: 3.2 cubic ft (91 L)
• Temperature Range: Ambient + 18°F ~ 392°F (Ambient + 10°C ~ 200°C)
• Temperature Resolution: 0.1
• Max degree of vacuum: 133 Pa
• Standard/Max Quantity of Shelves: 3/9
• Work chamber material: stainless steel
• Interior Dimension (W x H x D): 17.7 x 17.7 x 17.7” (450 x 450 x 450 mm)
• Exterior Dimension (W x H x D): 24.0 x 30.5 x 28.4” (610 x 774 x 721 mm)
• Max. load per shelf: 20 kg
• Net Weight: 145 kg
• Inert gas air inlet: has
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 2000 W

Specifications:

• Capacity: 6 x 1.5ml tubes
• Speed: 6,400 rpm
• Maximum RCF: 2000 x g