Used Lab Equipment

Features include:
• Ability to store 3 separate user-programmed cycles
• RS 232 interface for printer or PC communication
• Delayed start and stop function
• Time range up to 99 hours and 59 minutes
• Digital temperature readout
• User-friendly interface
• 304 stainless steel chamber
• Working temperature from 5°C over ambient to 250°C (300°C as option)
• 5” of insulation for low heat radiation
• Natural low velocity air flow
• Easy open door latching system
• Attractive look and design
• Removable air distribution plates (no tools required)
• Two internal wire shelves included

Convincingly cost saving laboratory dryer with a 707-liter chamber volume. High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry. High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening.

Specifications:

• Interior of stainless steel material: volume (22 l), depth (320 mm), width (240 mm), height (295 mm)
• External dimensions: depth (580 mm), diameter of the air branch outer/inner (52/49 mm), width (406 mm), height (604 (N) mm)
• Weight: 36 kg (gross)
• Heat emission at 250 °C: 300 W
• Air exchange speed at 250 °C: 6 per hour
• Working Temperature (from 5°C ambient temp): 250 °C

Features:

A line of economical drying ovens with a wide temperature range, precise and reliable course of simple drying and heating processes. The line ECOCELL is characterized by a noiseless run and a fine air streaming within the useful space.

Specifications:

• Dimensions: 790 mm x diameter of the air branch outer/inner 52/49 mm x 760 mm
• Tray storage area: 520 x 485 mm
• Racks: 19 max
• Maximum weight per tray: 30 kg
• Maximum weight inside the oven: 100 kg
• Working temperature (beginning of the regulation): from 5 °C above ambient temp. to:250 °C
• Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door: time variation cca (±)<= 1 °C, space deviation cca (±) % of the reached temperature 2,5 %
• Time required to reach 250 °C with closed air flap and voltage 230 V: 85 min
• Heat emission at 250 °C: 1940 W
• Air exchange speed at 150 °C: 4 per hour
• Electricity - mains 50/60 Hz: max. power input 3,6 kW
• Nominal voltage: 400/3N V
• Current: 7,8 A
• Chamber volume: 707-liter
• Working temperature: from +5°C over ambient temperature up to 250/300°C
• Natural fine air flow in the chamber, noiseless operation
• High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry
• High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
• Standard model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

This glass tube oven consists essentially of two concentric tubes of borosilicate glass mounted in the holder. The heating is accomplished by a totally transparent electrically conducting semiconductor layer vaporized on to the exterior of the glass tube

Specifications: 

• Temp range: 30 - 250 C +/- 10 degrees accuracy
• Turns ball: 15-18RPM/ 110-117V/220-240V

Specifications:

• Temperature Range: +40°C to +260°C
• Temperature Uniformity: ±3% at 100°C. Actual performance may vary depending on load,chamber size,sample placement,ambient temperature and environmental conditions.
• Controller: Microprocessor automatically optimizes control parameters during operation. Digital, single setpoint with simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in °C and °F.
• Control Accuracy: ± 0.5% typical.
• High Limit Overtemp: Adjustable high temperature limit protection.
• Heating Elements: Long-life,low-watt density elements, enclosed and protected.
• Interior Construction: Corrosion resistant 304 brushed stainless steel.
• Exterior Construction: Triple-wall,heavy gauge steel with scratch-resistant finish,or stainless steel (see chart);door latch (adjustable) and rugged hinges.
• Insulation: Fiberglass,minimum 3" on all sides.Peripheral silicon door gasket to minimize heat loss.
• Ports and Vents: Adjustable intake bottom right side;exhaust top right side,1.0" (25.4 mm) diameter.
• Air Exchange: Intake port allows fresh air entry to establish gravity airflow pattern.
• Shelves: Two (2) open wire shelves,adjustable. All models include 16 shelf positions at 0.875" increments.Stainless steel exterior models have stainless steel shelves;others are nickel plated.Stainless steel (S models only).
• Electrical: 120V, 50/60 Hz
• Interior Dimensions(W X F-B X H in" (mm)): 19" (480) x 15" (380) x 18" (450)
• Exterior Dimensions(W X F-B X H in" (mm)): 29" (730) x 22" (560) x 31" (780)

Description:

Yamato General-Purpose Incubators, IC Series, Yamato is a reliable and dependable addition to the Yamato Baths, Ovens, Incubators, and Cryogenics Storage imagefamily of products. Combining top-notch and uncompromising quality with an affordable price, the Yamato General-Purpose Incubators, IC Series, Yamato IC-600/can fulfill your laboratory needs while still offering a great value for the money.

Specifications:

• Volume: 152.9 L (5.4 cu. ft.)
• Electrical: 115 V, 50/60 Hz, 300 W
• Dimensions (W x D x H): 70.1 x 64 x 83.1 cm (34.375 x 8.03125 x 100.71875 in.)
• No. of Shelves:  3
• Net Weight: 55.8 kg (123 lbs.)
• Temperature Range: 5° above ambient to 60°C
• Temperature Control:  ±0.5° at 37°C
• Temperature Uniformity: ±0.6° at 37°C
• Range: 1-25% at atmospheric pressure (760 mmHg)
• Regulatory Compliance:  UL, CUL, CE
• Response Time: T90 < 7 minutes
• Sensor Technology: Opto-chemical
• Sterilisation Pressure: 2 bar/30 psig maximum
• Sterilisation Temperature: 132°C, 20 minutes

Features:

Achieve maximum temperatures of 220°C (428°F) with Thermo Scientific™ Vacuum Ovens, while benefiting from two control configurations and display options. These ovens feature independent vacuum and purge needle valves. Radiant warm-wall heating system optimizes uniformity and conserves chamber space for drying, curing, vacuum embedding and plating applications.

• Hydraulic thermostat temperature control with dial thermometer (5°C increments); medium and large units available with LED display (1°C increments)
• Polycarbonate safety shield protects door glass
• Silicone door gasket and positive latch door maintain seal at all vacuum levels – use of vacuum grease is recommended
• Vacuum and air lines are corrosion-resistant stainless-steel tubing for optimum chamber cleanliness and long-term performance
• Two removable stacking aluminum shelves

Specifications:

• Temperature Range: Ambient +10° to 220°C

Clean, reliable, oil free vacuum pumps are ideal for use with rotary evaporators, gel dryers, filtration flasks and manifolds, vacuum ovens and concentrators.

Specifications:

• Flow rate: 20 L/min
• Tube Size:37 in (0.95 cm)
• Pressure:15 psi
• Vacuum Level:75 torr
• Power Requirements:15V/60Hz or 230V/50Hz

Specifications:

• Temperature range: +10°C to +220°C
• Variation at 100°C: ±2.3°C
• Chamber volume: 150 L (5.3 cu ft)
• Internal dimensions: 23” x 18.1” x 21.9” (585 x 460 x 555 mm)
• External dimensions: 29.1” x 24.6” x 36.3” (740 x 625 x 922 mm)
• Weight: 130 lbs (59 kg)

Specifications:

• Temperature range: +15°C to +220°C
• Variation at 100°C: ±7.3
• Internal dimensions: 585 x 460 x 555 mm
• External dimensions: 740 x 625 x 922 mm
• Weight: 59 kg

Specifications:

• Temperature range: 100-550°F
• Interior dimensions: 18” x 14” x 18” (W x H x D)

Features

• 4-Digit LED

General Specifications:

• Chamber Volume: 2.9 ft
• Chamber (W x H x D): 21 x 18 x 18 in
• Temperature Range: +10 °C to +250 °C
• Temperature UNiformity  @ 100°C:  ±1.5° C
• Resolution: 0.1⁰C
• Rise Time: 46 min (to 200⁰C)
• Number of Shelf Positions: 16
• Power Requirements: 120 VAC, 60 Hz, 14 A

Description:

System controller equipped with a data buffering function and acts as an interface for connecting LC workstations, network-client computers, and analytical instruments via Ethernet. Up to eight units can be connected to the box-type CBM-20A. The card-type CBM-20Alite is used by incorporating it into an LC-20A-Series solvent delivery pump or auto-sampler. It can control up to five units, including the unit in which it is incorporated.

Specifications:

Connectable Units:

Solvent delivery units: 4 max
Autosamplers: 1
Column ovens: 1
Detectors: 2 max
Fraction collectors: 1
Sub-controllers: 2 max."
Number of connectable units: 8 (expansion possible up to 12)
Data Buffering: Approx. 24 hours for one analysis (at 500 ms sampling rate; available only with LCsolution)
Event I/O: 4 inputs, 4 outputs
Analog Boards: Up to 2 boards can be mounted
Operating temperature range: 4°C to 35°C
Dimensions, weight: 260 (W) x 140 (H) x 420 (D) mm, 5.5 kg
Power requirements: 100 VAC, 100VA, 50/60HZ

Specifications:

• Dimensions: 27 x 18 x 18 in

• Power Requirements: 120V, 60Hz

• Maximum Temperature: 482 °F (260°C)

• Volume: 2.9 cubic feet

Hot-air sterilizer meets the criteria of a medical device with a 111-liter chamber volume. Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air” area formation. High operation comfort; precise temperature and time regulation; three preset sterilization programs. Wide range of optional equipment and accessories and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (111 l), depth (390 mm), width (540 mm), height (530 mm)
• External dimensions: depth (640 mm), diameter of the air branch outer/inner (52/49 mm), width (760 mm), height (860 (N))
• Weight: 87 kg (gross)
• Heat emission at 250 °C: 760 W
• Air exchange speed at 250 °C: 49 cca/hour
• Working Temperature (from 10 °C above ambient temp): 250 °C

Features:

The Stericell line is used for hot-air sterilization of medical devices as well as materials with pre-set temperature and time parameters. It is built to have a quiet operation and is equipped with fine patent-protected system of forced air flow in the chamber. Ideal for medical and veterinary practices, clinics and hospitals, pharmacies, and laboratories.

Specifications:

• Dimensions: depth 640 mm x diameter of the air branch outer/inner 52/49mm x 760 mm
• Tray storage area: 520 x 335 mm
• Racks: 7 max
• Maximum weight per tray: 20 kg
• Maximum weight inside the oven: 50 kg
• Working temperature (beginning of the regulation): from 10 °C above ambient temp. to °C 250 °C
• Heat emission at 250 °C: 760 W
• Air exchange speed at 250 °C: 49 cca/hour
• Electricity - mains 50/60 Hz: max. power 1,9 kW
• Nominal voltage: 230 V
• Current: 8,3 A
• Chamber volume: 111-liter
• Working temperature: from +10°C over ambient temperature up to 250°C
• Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air“ area formation
• High operation comfort; precise temperature and time regulation; three preset sterilization programs
• Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven
• Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)