Used Lab Equipment

Features:

The Edwards E2M0.7 is a two stage oil sealed rotary vane pump which has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. This pump has an oil distribution valve that prevents any oil discharge to the pump interior(suckback) after the pump stops. It is equipped with air-tight pumping chambers, which prevents oil suckback unless the gas ballast valve is open.

Specifications:

• Operating temperature range: 12 - 40°
• Motor power: 0.09 kW
• Noise: 43 dB(A) at 50 Hz
• Noise with acoustic enclosure: 36 dB(A) at 50 Hz
• Pumping speeds: 0.7 to 1.5 m3h‑1
• Nominal rotational speed 50/60Hz: 1400/1700 rpm
• Low energy consumption: 0.09 kW.
• Oil capacity maximum: 0.28 litre
• Oil capacity minimum: 0.2 litre
• Recommended oil: Ultragrade 15
• Displacement (swept volume) 50Hz: 0.9 m3h-1 / 0.5 ft3min-1
• Displacement (swept volume) 60Hz: 1.1 m3h-1 / 0.6 ft3min-1
• Speed (Pneurop 6602) 50 Hz: 0.75 m3h-1 / 0.4 ft3min-1
• Speed (Pneurop 6602) 60Hz: 0.95 m3h-1 / 0.5 ft3min-1
• Ultimate vacuum (total pressure)
  without gas ballast: 3.0 x 10-3 mbar / 2.3 x 10-3 Torr
  with full gas ballast: 2.0 x 10-1 mbar / 1.5 x 10-1 Torr
• Inlet connection: NW10 flange
• Outlet connection: Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
• Maximum permitted pressure at outlet: 0.5 bar gauge / 7 psig
• Maximum inlet pressure for water vapour: 15 mbar / 11 Torr
• Maximum water vapour pumping rate: 8 gh-1
• Power connector: IEC EN60320 C13
• O ring sealed sight glass: allows visual inspection of oil level and condition.
• Gas ballast valve: for large water vapour handling capacity.
• Forced air cooling: ensures low pump surface temperature.

Features:

The Edwards E2M1.5 is a two stage oil sealed rotary vane pump which has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. This pump has an oil distribution valve that prevents any oil discharge to the pump interior(suckback) after the pump stops. It is equipped with air-tight pumping chambers, which prevents oil suckback unless the gas ballast valve is open.

Specifications:

• Operating temperature range: 12 - 40 °C
• Noise: 54 dB (A) at 50 Hz
• Noise with acoustic enclosure: 47 dB(A) at 50Hz
• Oil capacity max: 0.28 litre
• Oil capacity min: 0.2 litre
• Power connector: IEC EN 60320 C13
• Displacement (swept volume):

                50 Hz: 1.8 m3h-1 / 1 ft3min-1

                60 Hz: 2.2 m3h-1 / 1.3 ft3min-1

• Speed (Pneurop 6602):

                50 Hz: 1.6 m3h-1 / 0.8 ft3min-1

                60 Hz: 2.0 m3h-1 / 1.2 ft3min-1

• Ultimate vacuum (total pressure):
        without gas ballast: 3 x 10-3 mbar / 2.3 x 10-3 Torr
        with gas ballast: 2.5 x 10-2 mbar / 1.9 x 10-2 Torr
• Inlet connection: NW10 flange
• Outlet connection: Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
• Maximum permitted pressure at outlet: 0.5 bar gauge / 7 psig
• Maximum inlet pressure for water vapour: 15 mbar / 11 Torr
• Maximum water vapour pumping rate: 16 gh-1
• Motor power 50/60 Hz (IP54): 0.16 kW
• Nominal rotation speed 50/60Hz: 2800/3400 rpm
• Recommended oil: Ultragrade 15

Features:

The EM range of oil-sealed rotary pumps is renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and the ability to withstand vapour. They are commonly used for laboratory and light industrial applications. It is a freestanding instrument with the drive provided through a flexible coupling by either a single phase or three phase motor.

Specifications:

• Displacement:

                  50Hz: 20.5 m3h-1 /12.1 ft3min-1
                  60Hz: 25.0 m3h-1 /14.7 ft3min-1

• Speed (Pneurop 6602):

                   50 Hz: 17.0 m3h-1 /10 ft3min-1
                   60Hz: 20.4 m3h-1 /12.1 ft3min-1

• Ultimate vacuum (total pressure): 

                   without gas purge: 1 x 10-3 mbar /7.4 x 10-4 Torr
                   with gas purge: 1.5 x 10-1 mbar /1.1 x 10-2 Torr
                   with Fomblin: 1 x 10-2 mbar /7.5 x 10-3 Torr

• Inlet connection: NW25
• Outlet connection: Nozzle 15mm external Ø removable from 3/4 in BSP tapped hole
• Max permitted pressure at outlet: 0.5 bar gauge /7 psig
• Max inlet pressure for water vapour: 20 mbar / 15 Torr
• Max water vapour pumping rate: 0.3 kg h-1
• Operating temp range: 13-40°C
• Nominal Rotation speed 50/60Hz: 1440 /1720 rpm
• Power connector 1-ph: IEC EN 60320 C19
• Motor power 50Hz: 0.55 kW
• Motor power 60Hz: 0.75 kW
• Noise at 50Hz: 57 dB(A)
• Oil capacity max: 1.05 litre
• Oil capacity min: 0.75 litre
• Recommended oil: Ultragrade 19
• Thermal overload device: prevents overheating (single phase only).
• The drive is provided through a flexible coupling: by a single‑phase or three‑phase (four pole) motor.
• The motors: are totally enclosed and are cooled by the motor cooling fan.
• Full height O ring sealed oil sight glass: for easy checking of oil level and condition

Features:

The EM range of oil-sealed rotary pumps is renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and the ability to withstand vapour. They are commonly used for laboratory and light industrial applications. It is a freestanding instrument with the drive provided through a flexible coupling by either a single phase or three phase motor.

Specifications:

• Power Connector 1-ph: IEC EN 60320 C19
• Noise: 57 dB(A) at 50 Hz
• Oil capacity max: 1.5 litres
• Oil capacity min: 1.2 litres
• Displacement (swept volume):
             50Hz: 32.2 m3h-1 / 19 ft3min-1
             60Hz: 38.9 m3h-1 / 22.3 ft3min-1
• Speed (Pneurop 6602):
             50Hz: 27.5 m3h-1 / 16.2 ft3min-1
             60Hz: 33.0 m3h-1 / 19.5 ft3min-1
• Ultimate vacuum (total pressure)
             without gas ballast: 1 x 10-3 mbar / 7.5 x 10-4 Torr
             with gas ballast: 1.5 x 10-2 mbar / 1.1 x 10-2 Torr
             with Fomblin: 1 x 10-2 mbar / 7.5 x 10-3 Torr
• Inlet connection: NW25 flange
• Outlet connection: Nozzle 15mm external Ø removable from 3/4 in BSP tapped hole
• Max allowed pressure at outlet: 0.5 bar gauge / 7 psig
• Max inlet pressure for water vapour: 30 mbar / 23 Torr
• Max water vapour pumping rate: 0.7 kg h-1
• Operating temperature range: 13 – 40 °C
• Nominal rotation speed: 1440 / 1720 rpm
• Motor power 50Hz: 0.75 kW
• Motor power 60 Hz: 0.90 kW
• Recommended oil: Ultragrade 19
• Thermal overload device: prevents overheating (single phase only).
• The drive is provided through a flexible coupling: by a single‑phase or three‑phase (four pole) motor.
• The motors: are totally enclosed and are cooled by the motor cooling fan.
• Full height O ring sealed oil sight glass: for easy checking of oil level and condition.
• IE3 energy efficient 3 phase motor used with E2M28.

Features:

The F-330BAJ-C is capable of producing about 288 lbs of cubelet ice per day. This air-cooled, self contained, built in storage bin ice maker also features the Advanced CleanCycle24. It is also equipped with a greaseless bearing auger construction making it easy to maintain.

Specifications:

• Dimensions: (26 x 24 x 39 in)
• Ambient Temp Range: 45 – 100°F
• Water Temp Range: 45 – 90°F
• Water Pressure: 10 – 113 psig
• Voltage Range: 104 – 127V
• Refrigerant Charge: R-404a, (7.1 oz. / 200 g)
• Electrical Specs: Single phase, 115v/60/1 8 ft cord with NEMA 5-15 plug, amperage: 7.1, max fuse/HACR breaker: 15 A
• Plumbing Specs: 1/2" FPT inlet, minimum 1/4" nominal ID copper water tubing or equivalent, 3/4" FPT outlet, minimum 3/4" nominal ID hard pipe or equivalent
• Utility Consumption: 7.3 kWh per 100 lbs at 90/70, 12 gal of Potable Water per 100 lbs at 90/70

Features:

The F-300BAF is capable of producing approximately 303 lbs of flaked ice per day.  This Air-cooled, Self Contained, Built in Storage Bin ice maker stores up to 100 lbs of ice. It features an Automatic system flush when bin control is activated plus a greaseless bearing auger construction making it simple to maintain. The F-300BAF requires a Single phase, 115v/60/1 electrical connection. Ice maker with built in storage. ENERGY STAR qualified. Please consult the Specification Sheet for additional details.

Specifications:

• Up to 303 lbs of ice produced per 24 hours
• Up to 100 lbs of built-in storage capacity
• Produces flaked ice
• Durable stainless steel exterior
• Ice maker with built in storage
• Gear motor protected from overload
• Automatic system flush when bin control is activated
• R-404a refrigerant
• Designed for long life dependability
• Dimensions: 36″ W x 24″ D x 39″ H
• Ambient temperature range: 45 – 100°F
• Water temperature range: 45 – 90°F
• Water pressure: 10 – 113psig
• Voltage range: 104 – 127V
• 9 amps (15 Amp Max fuse)
• 6.7 kwh/100 [email protected] 90/70
• Single phase, 115v/60/1

The BD FACSMicroCount system offers a comprehensive solution for rapid enumeration of microbes. The integrated system consists of an instrument and reagents to support quality manufacturing processes.

Specifications:

• Product Screening
  • Assay Format: Qualitative
  • Sample Volume: 1 mL default
  • Throughput/Hour: 20 samples
  • Reagents: Up to 2
  • Reagent Volumes: 200 μL Nucleic Acid Dye 100 μL BRAG3
  • Reaction Time/Reagent: 90 seconds
• Water Analysis
  • Assay Format: Qualitative
  • Sample Volume: Variable volume range 0.10–0.50 mL
  • Throughput/Hour: 12–15 samples
  • Reagents: Up to 3
  • Reagent Volumes: 100 μL Nucleic Acid Dye 100 μL BRAG3 Buffer, 100 μL
  • Reaction Time/Reagent: 175 seconds
• Microfermentation
  • Assay Format: Qualitative
  • Sample Volume: Variable volume range 0.10–0.50 mL
  • Throughput/Hour: 12–15 samples
  • Reagents: Up to 3
  • Reagent Volumes: Variable ranges- method specified
  • Reaction Time/Reagent: Method specified

The HighTech series features refrigerated heating /circulators with innovative technology for sophisticated applications. The instruments provide powerful, electronically adjustable pressure and suction pumps. The instruments can be used for internal as well as external temperature control applications of closed and open systems. Low-level audible and optical alarms protect your process and the unit. Quickly cool-down bath fluids even at higher temperatures with active cooling control. Highest accuracy with 3-point calibration and PID temperature control. Suitable for use with flammable bath fluids —Class III (FL) approval.

Specifications:

Reservoir Capacity (L): 4.5

Max Temperature (° C): 200

Min Temperature (° C): -28

Temperature Stability (° C): ±0.02

Cooling Capacity At -20° C (watts): 60

Cooling Capacity At 0° C (watts): 250

Cooling Capacity At 20° C (watts): 350

Refrigerant: R134a

Max Flow Rate (L/min): 16

Low-Level Cutoff: Yes

High-Temperature Cutoff: Yes

Width (in): 9 1/10

Length (in): 16 1/2

Height (in): 24

Width (cm): 23

Length (cm): 42

Height (cm): 61

Features:

• Polypropylene structure with high chemical resistance
• One-piece welded structure
• Built-in polypropylene worktop
• Air suction from both the top and back panel
• Tempered glass sliding front sash
• Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
• Includes polypropylene lower base Hood
• Optional: sink/water tap/gas tap/vacuum tap, electric sockets
• 5″ color touch screen controlling lighting and power, optional VAV system
• Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
• EN-14175, ASHRAE 110-1995, CE certified

Applications:

Any researcher who requires genomic DNA, total RNA or recombinant protein as a starting material will benefit from the FastPrep System.

• Northern blot analysis, qPCR and microarrays
• Optimization of recombinant protein expression
• Library synthesis and Southern blots
• RT-PCR and differential display
• Pathogen screening of soil or water
• Environmental surveys
• Verification of food safety

Advantages:

Any researcher who requires genomic DNA, total RNA or recombinant protein as a starting material will benefit from the FastPrep System.

• Rapid and reproducible homogenization
• Lyse difficult or uncharacterized samples with ease
• Eliminate the frustration and inconsistency of traditional grinding methods
• Self-contained system removes possibility for contamination
• Save valuable time at sample preparation step
• Economical and easy to use
• Exceptional support and personalized experimental advice

Specifications:

• Lyse any hard sample in 40 seconds or less!
• Number and size of samples: 24 tubes (2ml)
• Time: Range 1-60 seconds, programmable with 0.5 m/s increments.
• Speed: Range 4-6.5 m/s programmable with 0.5 m/s increment.
• Acceleration: <2 seconds to maximum speed.
• Deceleration: <2 seconds to stop.
• Duty cycle: 6.5 m/s for 60 seconds with 60 seconds rest period between runs.
• Noise level: <70db noise.
• Construction: Painted aluminum body, with transparent top enclosure. Exchangeable polypropylene sample holder; Sealed Sample Compartment; Self-contained disposable pan for ease of cleaning; All surfaces chemically resistant.
• Controls: Microcontroller control panel, with LCD screen and membrane-printed keyboard; Microcontroller clock 16 MHz.
• Power requirements: 110VAC/60Hz or 220 VAC/50 Hz, 500 W
• Weight: 17.5 kg.
• Dimensions: Height-270mm; Base(Ellipse)size-425x330mm.
• Standard environmental temperature operating range: 4-40°C.

Features:

• Polypropylene structure with high chemical resistance
• One-piece welded structure
• Built-in polypropylene worktop
• Air suction from both the top and back panel
• Tempered glass sliding front sash
• Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
• Includes polypropylene lower base Hood
• Optional: sink/water tap/gas tap/vacuum tap, electric sockets
• 5″ color touch screen controlling lighting and power, optional VAV system
• Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
• EN-14175, ASHRAE 110-1995, CE certified

External Dimensions W x D x W:

• 1200 x 830 x 2320 mm
  47.3x 32.6 x 91.3”

Workspace (W x D x H):

• 1000 x 630 x 1170 mm
  39.4 x 24.8 x 46”

Features:

• Polypropylene structure with high chemical resistance
• One-piece welded structure
• Built-in polypropylene worktop
• Air suction from both the top and back panel
• Tempered glass sliding front sash
• Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
• Includes polypropylene lower base Hood
• Optional: sink/water tap/gas tap/vacuum tap, electric sockets
• 5″ color touch screen controlling lighting and power, optional VAV system
• Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
• EN-14175, ASHRAE 110-1995, CE certified

Features:

• Polypropylene structure with high chemical resistance
• One-piece welded structure
• Built-in polypropylene worktop
• Air suction from both the top and back panel
• Tempered glass sliding front sash
• Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
• Includes polypropylene lower base Hood
• Optional: sink/water tap/gas tap/vacuum tap, electric sockets
• 5″ color touch screen controlling lighting and power, optional VAV system
• Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
• EN-14175, ASHRAE 110-1995, CE certified

Features:

• Polypropylene structure with high chemical resistance
• One-piece welded structure
• Built-in polypropylene worktop
• Air suction from both the top and back panel
• Tempered glass sliding front sash
• Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
• Includes polypropylene lower base Hood
• Optional: sink/water tap/gas tap/vacuum tap, electric sockets
• 5″ color touch screen controlling lighting and power, optional VAV system
• Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
• EN-14175, ASHRAE 110-1995, CE certified

External Dimensions W x D x W:

• 1500 x 830 x 2320 mm
  59.0 x 32.6 x 91.3”

Workspace (W x D x H):

• 1300 x 630 x 1170 mm
  51 x 24.8 x 46”

Features:

• Polypropylene structure with high chemical resistance
• One-piece welded structure
• Built-in polypropylene worktop
• Air suction from both the top and back panel
• Tempered glass sliding front sash
• Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
• Includes polypropylene lower base Hood
• Optional: sink/water tap/gas tap/vacuum tap, electric sockets
• 5″ color touch screen controlling lighting and power, optional VAV system
• Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
• EN-14175, ASHRAE 110-1995, CE certified