Used Lab Equipment

Features:

Benchtop Autoclave

Features:

Combine compact design with high performance, reliability and safety

Intelligent design for your professional choice.

Microprocessor control system provides nine fully automatic programs, including add water, sterilization and dry

Eight pre-installed sterilization cycles; custom cycles are not an option for the SterilElite16 or 24

Two separate water-level check mechanisms: water tank level and chamber water level

Auto dry function

Pressure door auto-lock device

Chamber protected by pressure switch and steam pressure safety valve

Vacuum/Pressure Release button cuts off the power supply, exhausts the chamber of pressure, and releases the chamber vacuum simultaneously

Indicator lights:

DOOR OPEN - Door has not been closed completely; all functions stop

LOW WATER - Water level is too low

COMPLETE - Full cycle has run properly and is complete

Specifications:

• Temperature Range (Metric): 121, 135°C

• Programmability: Auto Dry

Description:

• Reduce the risk of spills using this Thermo Scientific™ StirBuddy™ Personal Stirrer, which has a compact and space-saving design with a large, 6 ft. stirring surface.
• Adjustable 200 to 2500 rpm stir speed through solid-state speed control
• Direct-drive motor/magnet assembly stirs solutions from water to viscous 50% glycerin
• Stirrer is field recalibratable to accommodate viscous liquids and specialized vessels
• Top plate and base are made of molded thermoplastic polyester

Specifications:

• Wattage: 48 W
• Weight: 2.4 lbs. (1.2 kg)
• Height: 3 in. (7.6 cm)
• Voltage: 120 V
• Outside Diameter: 6 in. (15.2 cm)
• Hertz: 60 Hz
• Speed: 200 to 2500 rpm

Features:

The T3 portable spectrometer is a compact portable instrument based on advanced CCD detection technology.

This highly compact instrument boasts all the features of a conventional bench-top spectrophotometer including Spectrum Scanning, Photometric, Quantitative and Kinetic methods.

Due to its portable design, it is also ideal for field monitoring and on-site operations for water and food analysis.

Pre-programmed test methods including calibration data for the Spectroquant series of reagent test kits from Merck Chemicals.

• Ruggedized case
• 2GB memory for data and method storage, support USB flash memory
• Easy to use with multiple interface including USB, RS232, Ethernet
• GPS positioning and GPRS mobile wireless data transmission (by SIM card)
• Lithium battery continuously work for 6 hours after fully charged
• Measure with cuvettes, test tube or optical fiber probe, work with a number of lab supplies as optional accessories to be a mobile lab

Specifications:

• Light source: Convergent tungsten lamp, 500 hrs of service life
• Measurement modes: Spectrum scan, quantitative measurement, kinetics measurement, photometric measurement
• Monochromator: Flat-field holographic concave grating
• Detector: CCD 1L x 511 2048 pixel
• Sampling accessories: Insert optic fiber probe, 10 mm and 20 mm pathlength tips; rectangular cuvette holder; cylindrical test tube holder
• Power supply: Built-in battery, continuously work for 6 hours after being charged
• Vehicle power: supply adapter (optional)
• Batterycharger: 90-240 V
• Printer: Micro printer (optional), support USB printer (PLC language)
• Operating system: Windows embedded CE 6.0 with 2 GB memory and timing function
• Input/display: 480 x 272 colour touch operation or mouse operation
• Wavelength range: 380-800 nm

Fisher Scientific Isotemp low temperature incubators are an ideal choice for incubation above or below ambient temperature.  Low temperature, refrigerated incubators are suited to fit your application needs for BOD (biochemical oxygen demand) waste water testing, food, beverage and agricultural testing, pharmaceutical research, microbiology, yeast growth and more. 

Specifications:

• Storage Capacity: 4 cubic feet
• Temperature Range: -15°C

Features:

The Scotsman UF424A-1 is a 24” wide, undercounter ice maker with bin that makes up to 440 lbs of flake style ice with an air-cooled, self-contained condenser. The bin is fit to hold 80 lbs storage capacity. This ice maker operates at 115 Volts, 60 Hz and 1-phase.

Specifications:

• Dimensions (HxWxD): (39" x 24" x 28.5")
• Condenser Type: Air Cooled
• Installation Type: Undercounter
• 24 Hour Ice Yield: 440 lb
• Bin Storage Capacity: 80 lb
• Ice Type: Flake Ice
• Voltage: 115
• Hertz: 60
• Phase: 1
• Amps: 9.5
• Water Usage: 12 gal/100 lb
• Power Usage: 4.61 kWh/100 lb

Key Features:

•  Compact, freestanding, mobile design.
•  Easy scale-up from research to full production.
•  Available with a Wizard 2.0 or LyoS™ control system.
•  Optional hydraulic stoppering system available.
•  Narrow and cleanroom configurations available with
• 8-inch vapor port.

Performance Specifications:

• Lowest Shelf Temperature(50 Hz / 60 Hz):  ≤ -57 °C / -60 °C
• Shelf Temperature Control Range*: -40 to 65 °C
• Shelf Pull-Down from 20 °C to -40 °C : ≤ 45 minutes
• Lowest Condenser Temperature(50 Hz / 60 Hz): ≤ -67 °C / -70 °C
• Maximum Condenser Capacity: ≥ 25 L
• Condenser Surface Area: 750 in2 (4838 cm2)
• Condenser Pull-Down from 20 °C to -45 °C: ≤ 25 minutes
• Maximum Ice Condensing Capacity in 24 hours: ≥ 20 L
• Maximum Deposition Rate: ≥ 0.83 L/hour
• Number of Compressors: 1
• Compressor Horsepower: 1.5 hp
• System Refrigerant: R245fa, R508B
• Vacuum Time to 100 Millitorr: ≤ 20 minutes
• Vacuum Rate of Rise: ≤ 30 mT/hour
• Volume-Based Leak Rate: ≤ .0016 mbarꞏL/sec
• Lowest System Vacuum: ≤ 15 mT
• Temperature Uniformity: ± 1.0 °C

Utility Requirements:

• Compressed Air (for units with isolation valve): 80 psig (6.5bar)
• Ambient Room Temperature: 15-25 °C (59-77 °F)
• Approx. Peak Room Heat Generated (Air-Cooled Units): 8,900 BTU/h
• Approx. Peak Room Heat Generated (Water-Cooled Units): 4,000 BTU/h
• Cooling Water Usage**: 1-3 gpm (4-12 Lpm)

Electrical Requirements:

• Voltage: 208 - 230 VAC
• Hertz: 60 Hz
• Phase: 1 Φ
• Breaker Amperage: 30 A
• Recommended Outlet: NEMA L6-30R

Dimensional Data - Cleanroom Configuration:

• Width: 25 in (64 cm)
• Depth: 75 in (191 cm)
• Height: 73.5 in (187 cm)
• Max. Weight: 850 lb (386 kg)
• Min. Clearance on All Sides: 10 in (25 cm)

Features:

•  Brinkmann Lauda WK 1200 Circulation Chiller 

Specifications:

• Working temperature range (°C): 0-40
• Temperature stability (±K): 0.5
• Cooling output at 20 °C: 1.2kW
• Pump pressure max.: 3.2 bar
• Pump flow max.: 40 L/min

Description:

• Glass draft shield with motorized opening for precise weighing even in unstable environments.
• Fully automatic adjustment "ProFACT" using internal weights.
• Built-in level sensor, illuminated level indicator and Leveling Assistant for fast and easy leveling.
• Built-in applications for normal weighing, statistics, formulation, piece counting, percent weighing, density, differential weighing and LabX Client.
• Integral RS232C interface.
• Slot for second interface (optional).
• Touch-sensitive graphics terminal ("Touch screen") with color display
• Two programmable sensors for hands-off operation ("SmartSens") to speed up frequently recurring tasks.

Specifications:

• Cable for AC adapter: 3-core, with country-specific plug
• Balance power supply: 12 V DC ±3%, 2.25 A, maximum ripple: 80 mVpp
• Overvoltage category: II
• Degree of pollution: 2
• Protection: Protected against dust and water
• Range of application: For use only in closed interior rooms
• Height above mean sea level: Up to 4000 m
• Ambient temperature: 5–40 °C
• Relative air humidity: Max. 80% up to 31 °C, linearly decreasing to 50% at 40 °C, noncondensing
• Warm-up time: At least 120 minutes after connecting the balance to the power supply; when switched on from standby-mode, the balance is ready for operation immediately
• Maximum Capacity: 120 g
• Readability: 0.1 mg
• Tare range (from…to): 0 … 120 g
• Dimensions (W × D × H): 263 × 487 x 322 mm
• Interface update rate: 23 /s
• Usable height of draft shield: 235 mm
• Weight: 10 kg
• Number of built-in reference weights: 2