Used Lab Equipment

Used Lab Equipment

Water Baths: 46-60 of 196

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Napco Cat. No. 51200065 CO2 Water Jacketed IncubatorImage Coming Soon

Napco Cat. No. 51200065 CO2 Water Jacketed Incubator

Cambridge ID #: 7059
  • cat# 51200065
  • Learn More
    Napco-Cat.-No.-51200065-CO2-Water-Jacketed-Incubator-7059
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Waters Column Water Heater HPLC Column CompartmentImage Coming Soon

    Waters Column Water Heater HPLC Column Compartment

    Cambridge ID #: 8911

    Column Heater for Waters Alliance Series

    Specifications:

    • Temperature Range: 20 to 65 °C in 1 °C increments (5 °C above ambient)
    Learn More
    Waters-Column-Water-Heater-HPLC-Column-Compartment-8911
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Barnstead D12651 Water Purification

    Barnstead D12651 Water Purification

    Cambridge ID #: 14218

    These systems purify water for general laboratory use or as a feed source for ultrapure systems. The 12 and 24 L/hr models use a diaphragm pump for quiet, efficient operation; the 6 L/hr model must be connected to an in-house line pressure. The built-in membrane protection system extends the life of the membrane. It includes a special cartridge that softens the water, and an automatic flush that removes scale build-up on the membrane. The control panel operates and monitors the main functions.

    Specifications:

     

    • Maximum Flow Rate: 12 L/hour
    • Inlet Port: â…œ OD compression
    • Maximum Inlet Water Temperature: 35°C (95°F)

     

    • Minimum Inlet Water Temperature: 1°C (34°C)
    Learn More
    Barnstead-D12651-Water-Purification-14218
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Thermo Forma D12681 Water Purification Storage TankImage Coming Soon

    Thermo Forma D12681 Water Purification Storage Tank

    Cambridge ID #: 12549

    Description:

    Benefit from automatic operation with polythylene and fiberglass Thermo Scientific™ Barnstead™ RO Storage Reservoirs. For use with Barnstead RO (Reverse Osmosis) water systems.

    Specifications:

    • Capacity: 8 gal. (30 L)
    • Height: 18 in. (46 cm)
    • Width: 15 in. (38 cm)
    • Type: 8 gal (30 L) capacity
    • Single access port
    Learn More
    Thermo-Forma-D12681-Water-Purification-Storage-Tank-12549
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Thermo Forma EasyPure II UV Water PurificationImage Coming Soon

    Thermo Forma EasyPure II UV Water Purification

    Cambridge ID #: 12547

    Description: The Thermo Scientific EASYpure II RF is a batch-fed water purification system designed to provide Type I reagent-grade water with extremely low organic carbon content. It uses a three-stage deionization process combined with a 0.2 micron final filter to polish pretreated water (distilled, deionized, or reverse osmosis) to produce water with a resistivity of up to 18.2 megohms-cm and with a total organic carbon content of less than 10 ppb. Water resistivity is continuously sensed by a resistivity cell and displayed on a digital display. The EASYpure II RF is designed to be a bench mounted unit. If wall mounting is required, contact Technical Services for information on a wall bracket and mounting accessory.

    Specifications:

     

    • Dimension Requirements: 12" W X 19" D X 18 1/8" H (30.5 cm X 48.3 cm X 46.0 cm)
    • Clearance Requirements: Sides - 4" (10.1 cm) minimum to allow air flow, Above - 12" (30.5 cm) minimum for reservoir replenishment
    • Storage Reservoir Capacity: Approximately 6.5 liters usable, 7.0 liters total
    • Electrical Requirements:  100-240 VAC +5% -10%, 47-63 Hz.
    • Resistivity: 18.2MW·cm at 25°C
    • Conductivity: 0.055 µS/cm
    • Feedwater Source: Pretreated
    • Flow Rate: Up to 1L/min.
    • Bacterial Content: <1CFU/mL
    • Particles >0.2µM/mL: <1 μM/mL
    • TOC Monitor with UV Intensity Monitoring: No
    • Feed Water Monitoring: No
    • Feedwater Pressure: 100psig (6.9 bar)
    • Voltage: 100 to 240VAC
    • Hertz: 50/60Hz
    • Inlet Water Temperature (Metric): 4° to 40°C
    • Electrical Requirements: 100 to 240VAC 50/60Hz
    Learn More
    Thermo-Forma-EasyPure-II-UV-Water-Purification-12547
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Fisher Scientific FS14 General Purpose Water Bath

    Fisher Scientific FS14 General Purpose Water Bath

    Cambridge ID #: 16255

    Microprocessor-controlled Thermo Scientific water baths provide superior temperature uniformity for your specific applications and offer unique features such as seamless-stainless steel interior chamber and epoxy-coated exterior which make them resistant to corrosion and chemical damage.

    Specifications:

    • Temperature Range: Ambient to 100°C
    • Universal global voltage
    • Audible alarms
    Learn More
    Fisher-Scientific-FS14-General-Purpose-Water-Bath-16255
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Neslab GP-200 Heated Water Bath

    Neslab GP-200 Heated Water Bath

    Cambridge ID #: 16266

    The Neslab GP-200 waterbath simplifies workflow and maximizes productivity.  Their rugged construction, compact footprint, advanced temperature controls and ease of use make these water baths a smart choice for your labs.

    Specifications:

    • Power Requirements: 220-240V, 50Hz
    • Temperature Range: +5C above ambient up to +150C
    • External dimensions (W) x (D) x (H): 32 x 47 x 34 cm
    • Internal dimensions (W) x (D) x (H): 26,5 x 25,5 x 15 cm
    Learn More
    Neslab-GP-200-Heated-Water-Bath-16266
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Fisher Scientific isotemp 2332 Water Bath

    Fisher Scientific isotemp 2332 Water Bath

    Cambridge ID #: 9075

    Specifications:

    • Capacity: 20 L
    • Temperature Range: Ambient to 100°C
    • Temperature Control: ±0.1°C between ambient and 100°C
    • Temperature Uniformity: ±0.24° at 37°C
    • Temperature Stability: ±0.5° at 37°C
    • Electrical Requirements: 120V, 50/60Hz, 8.5A
    Learn More
    Fisher-Scientific-isotemp-2332-Water-Bath-9075
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Millipore Milli-Q Gradient A10 Water Purification

    Millipore Milli-Q Gradient A10 Water Purification

    Cambridge ID #: 13718

    Specifications:

    Flow rate:

    • 1.3 – 1.7 LPM with Millipak® Express 20
    • 1.3 – 1.7 LPM with BioPak

    Resistivity:

    • Minimum 18.0 MΩ.cm @ 25°C
    • Typically 18.2 MΩ.cm @ 25°C

    Particles: ≤ 1/ml (particle size > 0.22 μm)

    Pyrogens: BioPak installed < 0.001 Eu/ml

    TOC: Maximum 5 ppb (this specification came from test conditions where a Milli-Q Gradient was fitted with a Q-Gard® 1 Purification Pack and a Quantum EX Ultrapure Cartridge and the feedwater came from a Millipore RiOs Water System. The feedwater TOC value was < 50 ppb). The TOC of the Milli-Q Product Water can vary as a function of the feedwater TOC.

    Micro-Organisms: ≤ 1 CFU/ml

    Weight:

    Milli-Q Gradient: Operating weight (wetted Q-Gard, Quantum and Millipak): 16 kg.

     

    • Milli-Q Gradient A10: Operating weight: 16.8 kg.

    Electrical: 

    The electrical requirements for a Milli-Q Gradient (or Milli-Q Gradient A10) are:

    • 120 VAC ± 10%, 50/60 Hz, 100 VA, 0.5 amp source, 2 amp Time Lag fuse used (ref. ZMQS6V0T1, MQP6V0T1, ZMQS6V001, ZMQP6V001).
    • 230 VAC ± 10%, 50/60 Hz. 0.26 amp source, 1 amp Time Lag fuse used (ref. ZMQS5V0T1, ZMQP5V0T1, ZMQS5V001, ZMQP5V001).
    • The source of electrical power should be within 1 meter of the Milli-Q. The source of electrical power must be earth grounded.

    Measurement Ranges for TOC, Resistivity, Conductivity and Temperature:

    • Resistivity Measurement Range: 2.4 – 18.2 MΩ.cm (compensated to a 25°C value)
    • Conductivity Measurement Range: 0.055 – 0.294 μS/cm
    • Temperature Measurement Range: 0 – 45°C (not the system temperature operating range)
    • TOC Measurement Range: 1 – 999 ppb
    Learn More
    Millipore-Milli-Q-Gradient-A10-Water-Purification-13718
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Millipore Milli-Q Synthesis A10 Water Purification

    Millipore Milli-Q Synthesis A10 Water Purification

    Cambridge ID #: 15882

    Specifications:

    Flow rate:

    • 1.3 – 1.7 LPM with Millipak® Express 20
    • 1.3 – 1.7 LPM with BioPak

    Resistivity:

    • Minimum 18.0 MΩ.cm @ 25°C
    • Typically 18.2 MΩ.cm @ 25°C

    Particles: ≤ 1/ml (particle size > 0.22 μm)

    Pyrogens: BioPak installed < 0.001 Eu/ml

    TOC: Maximum 5 ppb (this specification came from test conditions where a Milli-Q Gradient was fitted with a Q-Gard® 1 Purification Pack and a Quantum EX Ultrapure Cartridge and the feedwater came from a Millipore RiOs Water System. The feedwater TOC value was < 50 ppb). The TOC of the Milli-Q Product Water can vary as a function of the feedwater TOC.

    Micro-Organisms: ≤ 1 CFU/ml

    Weight:

    Milli-Q Gradient: Operating weight (wetted Q-Gard, Quantum and Millipak): 16 kg.

     

    • Milli-Q Gradient A10: Operating weight: 16.8 kg.

    Electrical: 

    The electrical requirements for a Milli-Q Gradient (or Milli-Q Gradient A10) are:

    • 120 VAC ± 10%, 50/60 Hz, 100 VA, 0.5 amp source, 2 amp Time Lag fuse used (ref. ZMQS6V0T1, MQP6V0T1, ZMQS6V001, ZMQP6V001).
    • 230 VAC ± 10%, 50/60 Hz. 0.26 amp source, 1 amp Time Lag fuse used (ref. ZMQS5V0T1, ZMQP5V0T1, ZMQS5V001, ZMQP5V001).
    • The source of electrical power should be within 1 meter of the Milli-Q. The source of electrical power must be earth grounded.

    Measurement Ranges for TOC, Resistivity, Conductivity and Temperature:

    • Resistivity Measurement Range: 2.4 – 18.2 MΩ.cm (compensated to a 25°C value)
    • Conductivity Measurement Range: 0.055 – 0.294 μS/cm
    • Temperature Measurement Range: 0 – 45°C (not the system temperature operating range)
    • TOC Measurement Range: 1 – 999 ppb
    Learn More
    Millipore-Milli-Q-Synthesis-A10-Water-Purification-15882
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Amersham Biosciences GE MultiTemp II Circulating Water BathImage Coming Soon

    Amersham Biosciences GE MultiTemp II Circulating Water Bath

    Cambridge ID #: 12402
    This item is new to the Cambridge Scientific Used Lab Equipment Inventory. As a result, a product description is currently unavailable. For further information about this product, please inquire and a representative will contact you shortly.
    Learn More
    Amersham-Biosciences-GE-MultiTemp-II-Circulating-Water-Bath-12402
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Amersham Biosciences GE MultiTemp III Circulating Water Bath

    Amersham Biosciences GE MultiTemp III Circulating Water Bath

    Cambridge ID #: 13313

    MultiTemp III Thermostatic Circulators provide efficient, uniform cooling to further improve resolution and speed up separations at high voltages. The power rating of the EPS 3501 XL is able to handle both electrophoretic and basic blotting applications. MultiTemp III refrigerated bath circulator provides reliable and reproducible temperature control by circulating constant temperature liquid to external electrophoresis equipment. The working temperature range spans requirements from heat sensitive enzyme separations to highly denaturing DNA sequencing. 

    Specifications:

    • Temperature Range: -10°C to +90°C ± 0.1°C
    • Coolant Circulation Rate: 12 L/min
    • Cooling Capacity: 200 W at 5°C, 240 W at 20°C
    • Heating Capacity: 800W
    • Pump Capacity: >32 bar
    • Bath Volume: 3 L
    • Dimensions: 42 x 22 x 48 cm
    • Weight: 28 kg
    Learn More
    Amersham-Biosciences-GE-MultiTemp-III-Circulating-Water-Bath-13313
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    PolyScience MX10S135-A12E General Purpose Water Bath

    PolyScience MX10S135-A12E General Purpose Water Bath

    Cambridge ID #: 20137
    This item is new to the Cambridge Scientific Used Lab Equipment Inventory. As a result, a product description is currently unavailable. For further information about this product, please inquire and a representative will contact you shortly.
    Learn More
    PolyScience-MX10S135-A12E-General-Purpose-Water-Bath-20137
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Benchmark Scientific myBath B2000-12 *NEW* Water Bath

    Benchmark Scientific myBath B2000-12 *NEW* Water Bath

    Cambridge ID #: 18298

    The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. Easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration.* High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination.

     

    Specification:

     

    • Temp. Range: Ambient +5 to 100C
    • Capacity: 12 Liters
    • Temp. Accuracy: +/-0.2C at 37C
    • Temp. Increments: +/-0.1C
    • Temp. Uniformity: +/-0.2C at 37C
    • Dimensions: 18 x 10.5 x 16.2 in.
    • Chamber Dimensions: 5.3 x 9.4 x 5.5 in.
    • Weight: 157 lbs.
    • Electrical: 115V
    Learn More
    Benchmark-Scientific-myBath-B2000-12-*NEW*-Water-Bath-18298
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Benchmark Scientific myBath B2000-2 *NEW* Water Bath

    Benchmark Scientific myBath B2000-2 *NEW* Water Bath

    Cambridge ID #: 18232

    The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. Easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration.* High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination.

     

    Specification:

     

    • Temp. Range: Ambient +5 to 100C
    • Capacity: 2 Liters
    • Temp. Accuracy: +/-0.2C at 37C
    • Temp. Increments: +/-0.1C
    • Temp. Uniformity: +/-0.2C at 37C
    • Dimensions: 6.5 x 8 x 6 in.
    • Chamber Dimensions: 5.3 x 9.4 x 5.5 in.
    • Weight: 4.5 lbs.
    • Electrical: 115V
    Learn More
    Benchmark-Scientific-myBath-B2000-2-*NEW*-Water-Bath-18232
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping