Used Lab Equipment

Features:

Mini 48 DNA purification instrument is used to automatically purify plasmid DNA directly from bacterial culture in just over one hour.

Specifications:

• Electrical: 110V

Specifications:

• Product Type: High Performance Refrigerator
• Total Volume (cubic feet): 49.28
• Lab Grade Refrigerator or Freezer Energy Consumption (kWh/day): 9.14
• Peak Temperature Variance (ºC): 4.56
• Product Form Factor: Upright
• Total Number of Doors: 2
• Number of glass doors: 2
• Door Opening Orientation: Swinging,Left,Right
• Number of Drawers or Shelves: 4
• Dimensions(DxHxW in): 32.87 x 74.25 x 56.75 
• Refrigerant Type: R-404A
• Installed Accessories: shelves only, no additional electrical 
• Insulation: HCFC-free rigid foamed-in-place polyurethane
• Cooling method: Forced air circulation with double fan
• Compressor: 250W, hermetic reciprocating type
• Evaporator: Fin tube type
• Condenser: Fin tube type
• Defrost method: Forced type (cycle defrost system), fully automatic hot pipe for automatic evaporation for drain water
• Defrost heater: 275 W
• Temperature control: Microprocessor controlled on/off type. Thermistor sensor Temp. control range: 20C to 140C (ambient temp. -50C to 00C no-load) 20C to 230C (ambient temp. 00C to 350C no-load) (10C step)
• Safety features: High/low temp. Protection circuit, remote alarm contact, temperature lock, part replacement notification, self diagnostics, memory backup (nonvolatile memory)
• High temp. alarm: Flashing LED & buzzer after 0 to 15 minutes delay
• Low temp. alarm: Flashing LED & buzzer after 0 to 15 minutes delay
• Door ajar alarm: Flashing lamp, buzzer after 0 to 15 minutes delay
• Interior lamp: 40W x 1, fluorescent lamp

Alarm and safety features:

• High temperature alarm: 20C to 140C () above setpoint ( Flashing LED & buzzer )
• Low temperature alarm: 20C to 140C () below setpoint, 00C or lower ( Flashing LED & buzzer )
• Over heating protection: Interior temperature rises to 400C ( Fan motor & heater OFF )
• Over cooling protection: Interior temperature lowers to 10C ( Compressor OFF )
• Tamper proof: Tamper proof key lock ON (Set temperature cannot be altered )
• Memory backup: Power failure (Memory of settings)
• Door ajar: Door not closed ( Door ajar lamp ON & buzzer )
• Self diagnostics: Sensor open or short ( Error code shown E01, E02 )
• Remote terminal: Operation can be checked from office or control room away from the lab

Features:

Features a large, universal icon and English display with on-screen prompts and single-point calibration capability. For laboratory use only. Suitable for tank capacities up to 28 liters.

Specifications:

• Overall Dimensions (L x W x H) (inches): 4.3 x 3.8 x 14.1 in
• Description: 135, Immersion Circulator
• Controller Type: MX Immersion
• Working Temperature Range °F: Ambient + 20° to 275°
• Working Temperature Range °C: Ambient +10° to 135°
• Reservoir Capacity (gallons): 7.4
• Reservoir Capacity (liters): 28
• Reservoir/Tank Material: Stainless Steel
• Temperature Stability °F: ±0.13°
• Temperature Stability °C: ±0.07°
• Display: 3.25" LCD
• Display Resolution (Set): 0.1
• Display Resolution (Read): 0.1
• Pump Type: Pressure
• Pump Speed: One
• Flammability Class (DIN 12876-1): I (NFL)
• Low Liquid Level Protection: Yes
• Maximum Ambient Temperature °F: 95°
• Maximum Ambient Temperature °C: 35°
• Environmental Compliance: RoHS

Features:

The OCM “Omni-Clave” is a steam pressure autoclave made of stainless steel. It comes with an automatic shut off and venting mechanism. Smallest of the Omni-Clave models. Reaches 250 °F in approximately twelve minutes from a cold start or approximately 5 minutes from a warm start. Maybe used as a steam or dry-heat sterilizer. Optional dry-heat door is available. Equipped with ASM E-type safety valve to limit maximum chamber pressure to 35 PSI. Reservoir drain conveniently located at front. Unique bolt latch is designed to prevent door from unsafe opening under pressure. Easily replaceable silicone door gasket. This autoclave is best for smaller offices and can be found in a range of settings, including dental offices, physician’s offices, clinics, hospitals, nursing homes, and laboratories.

Specifications:

• Dimension:
  • Overall: 15″ W, 18″ D x 13″ H
  • Chamber Size: 7″ Diameter x 14″ D
• Sterilizer Type: Manual Steam
• Model Type: Tabletop / Countertop / Desktop
• Integrated Reservoir: no plumbing required
• Controls: on Front Panel
• Water Cut-Off: Low
• Safety Door
• Non-Insulated Door
• Volume: 2 Gallons
• Tray Capacity: 2
  • Small: 5″ x 13″
  • Large: 6 1/2″ x 13″
• Cycle Time: 3 to 25 minutes
• Power: 110-120 V 50/60 Hz
• Weight
  • NET: 50 lbs
  • Gross: 70 lbs

Features:

The heavy metal analyzer PF7 features good accuracy, high sensitivity, simple structure, small volume and easy operation.  The automated PF7 is an ideal supplementary of ICP-MS if testing dozens of elements in ULTRA trace elements. A perfect replacement of ICP-MS if only testing heavy metals like Arsenic, Mercury, Cadmium and Lead. Popular instruments in various market and research industries including: Cannabis, Environment (Water and Soil), Agricultural, Public health, Pharmaceutical, Metallurgical, Food and beverage, Clinical, Geological, Petrochemical, and more. Also it comes with XYZ axis auto sampler AS4 as an optional accessory making the analysis even simpler.

â—† Pre-aligned whole system: For the perfect running condition, plug and play

â—† Free-adjustment and data coded high performance lamps: achieve better sensitivity and accuracy

â—† Up to 3 testing channels: For simultaneous analysis, high efficiency

â—† Fully sealed reagent system: Inorganic and organic waste dispose separately, build-in toxic elements trap devices, green laboratory, care for the health

â—† Gas-driven flow system: Without consumable parts, auto purge, chemical resistant FEP tubing, easy to maintenance

â—† High grade automation/intelligent: Auto sampler, Auto dilution, auto optimized

â—† Double beam optical system: To eliminate light source drift

â—† New design Gas Liquid Separator: With magnetic stirring and Peltier system for improved repeatability of analytical results and high sensitivity

â—† Easy to upgrade: Speciation system accessory, compatible with multi brand HPLC pump

Specifications:

• Atomiser: Quartz furnace tube with auto ignition
• Furnace Heating: Computer controlled heating
• Hydride Generator: Continuous flow high performance for cold vapour Mercury and hydride determinations of As, Se, Te, Bi, Sb, Sn, Zn, Pb, Cd, Ge
• Gas Requirement: High purity Argon gas (>99.99 %) @ 30 psi
• Exhaust System: 2 stage filtration to decontaminate pollutants
• Carrier and Reagent Delivery: Gas pressure driven system
• Gas/Liquid Separator:  High efficiency gas/ liquid separator with magnetic stirring and Peltier cooling
• Baseline Stability: <1.5 %
• Baseline Noise: <1.5 %
• Linear Range: >10³

A rotary evaporator ideal for routine distillation, complete with vertical water coil condenser.

Specifications:

• Volume Capacity: 50 ml - 3 L

• Speed Range: 0 - 240 rpm

Description:

Designed to provide an optimal, stable growing environment for cultures. 5.8 cu.ft. interior capacity. Ideal for cell biology, viral growth, tissue culture, genetics studies, cancer research, embryo growth and microbiological/biochemical assays.

Features:

• Thermal conductivity CO2 sensor provides accurate CO2 control for applications with more consistent temperature and humidity levels.
• CO2 specifications:
• range: 0 to 20%
• control sensitivity: 0.1%
• stability: ±0.1%
• CO2 auto shut-off upon door opening. Factory calibrated at 5 and 10%.
• Temperature specifications:
• range: 5°C above ambient to 60°C
• control sensitivity: ±0.1°C
• uniformity: ±0.4°C at 37°C.
• Factory calibrated at 37°C.
• A water-jacket surrounds interior chamber for thermal stability and uniform heating.
• Features include an audible/visual CO2 alarm programmable for high/low deviation from setpoint, CO2 auto shut-off and a CO2 test port in center of glass door. Temperature indicators include water-jacket temperature indicator and audible/visual programmable temperature alerts on high/low deviation from setpoint.
• Tempered inner glass door is heated by outer door to prevent condensation. Quick response and recovery after door openings.
• Has a 1.5" porthole in the rear wall with silicone stopper, adjustable levelling feet, closed-cell silicone inner door gasket that maintains a positive seal and water-jacket drain.
• Comes with a gas input HEPA filter. Optional in-chamber HEPA filter removes 99.97% of airborne particulates such as hair, pollen, plant spores, skin and bacteria to dramatically improve air quality and provide additional protection from contamination. Maintains still air culture environment without high-velocity airflow (any filters that are with the chamber are not guaranteed)
• Reversible inner and outer doors allow left-to-right or right-to-left opening.
• Control panel key switch for protection against unauthorized access.
• RS485 data port.
• Remote alarm contacts. Battery back-up for alarm system.
• Autoclavable water pan helps to manage humidity, the primary factor in preventing cell and media desiccation.
• Includes 2 perforated, removable stainless steel shelves. Expandable to 20 shelves.

Features:

This detector is ideal for analysis of components with limited or no UV absorption such as alcohols, sugars, saccarides, fatty acids, and polymers. It provides high sensitivity, fast baseline stabilization and excellent reproducibility.

Specifications:

• Measuring Method: Deflection type
• Refractive Index Range:00–1.75°
• Range:25 to 512 µRIU
• Linearity: 600 µRIU
• Noise Level: Less than 2.5 nRIU, response: 1.5 s
• Autozero: Optical and electronic autozero
• Flow Cell: 8 µL; 0.05 MPa (7.5 psi) maximum pressure
• Dead Volume: Less than 600 µL
• Flow Rate: 10 mL/min (with water)
• Temperature Control: 30 to 50°C in 1°C steps
• Response:1, 0.25, 0.5, 1.0, 1.5, 2.0, 3.0, 6.0 s
• Automated Startup Functions: Purge cycles, equilibration, autozero, baseline drift and noise verification
• Validation Functions: Noise, temperature, drift, lamp age, lamp voltage, accuracy (determined filling the detector cell with a defined standard solution)
• Display: Color liquid crystal display, allows real-time baseline monitoring
• Analog Outputs: Integrator: 0–1 V; Recorder: 0–10 mV
• Contact Closure Inputs: Auto zero, marker, polarity, purge on/off
• Contact Closure Outputs: Ready, solvent leak, error
• Communication: RS-232
• Power Consumption: 150 VA Max.
• Dimensions: 260 x 200 x 400 mm (10.1 x 7.8 x 15.6 inches)
• Weight: 12 kg (27 lbs)

The new Roto-Therm series incubating mixer provide a variety of mixing capabilities. Suitable and not limited to protein binding, histochemistry, resuspension, hybridization, and nucleic acid purification. This product is equipped with in-lab calibration function and programs to maintain chamber temperatures for accurate results.

Specifications:

• Temperature: Ambient: +5 to 60°C
• Speed: 24 rpm
• Dimensions: 11.8 x 8.5 x 9 in (29.5 x 21.6 x 22.9cm)
• Weight: 9 lbs (4 kg)

The new Roto-Therm series incubating mixer provide a variety of mixing capabilities. Suitable and not limited to protein binding, histochemistry, resuspension, hybridization, and nucleic acid purification. This product is equipped with in-lab calibration function and programs to maintain chamber temperatures for accurate results.

Specifications:

• Temperature: Ambient: +5 to 60°C
• Speed: 5 to 70 rpm
• Mixing Modes: Mix, Pause, Rock
• Dimensions: 11.8 x 8.5 x 9 in (29.5 x 21.6 x 22.9cm)
• Weight: 10 lbs (4.5 kg)

Description:

The NESLAB RTE 211 refrigerated bath chiller circulator offers powerful cooling and heating, expansive temperature ranges, and sophisticated controller technology. These robust, compact units offer precise temperature stability and high reliability for external circulation and in-bath applications. A versatile combination force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems.

Specifications:

• Temperature Range: -25°C to + 150°C
• Temperature Stability: ±0.01°C
• Cooling Capacity: 500 Watts, 1705 BTU/Hour
• Heater (watts): 800 (60 Hz)
• Bath Work Area (L x W x D): 9.25 x 10 x 6 in. (23.5 x 25.4 x 15.2 cm)
• Bath Volume: 3.2 gal (12.1 L)
• Dimensions (H x W x D): 25 x 12.375 x 18.375 in. (63.5 x 31.4 x 46.7 cm)
• Power Requirements: 115 V, 60 Hz
• Weight: 99 lbs. (45 kg)

The Thermo Scientific NESLAB™ RTE 740 RTE-740 refrigerated bath chiller circulator offers powerful cooling and heating, expansive temperature ranges, and sophisticated controller technology. These robust, compact units offer precise temperature stability and high reliability for external circulation and in-bath applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems.

Specifications: 

• Temperature Range:-40°C to 200°C
• Flow Rate:15 L/min
• Capacity:7 L
• Power Requirements:115V, 60Hz, 16A

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.65 litres
• Oil max: 1 litres
• Displacement :
    50Hz: 14.2 m3h-1 / 8.4 ft3min-1
    60Hz: 17 m3h-1 / 10 ft3min-1
• Speed (Pneurop 6602)
    50Hz: 12 m3h-1 / 7.1 ft3min-1
    60Hz: 14.2 m3h-1 / 8.4 ft3min-1
• Ultimate pressure: 2 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 6 x 10-2 mbar / 4.6 x 10-2 Torr
• Ultimate pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 32 mbar / 24 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 290 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.42 litres
• Oil capacity max: 0.7 litres
• Displacement:

                50Hz: 3.7 m3h-1 / 2.2 ft3min-1

                60Hz: 4.5 m3h-1 / 2.6 ft3min-1

• Speed (Pneurop 6602):

                50Hz: 3.3 m3h-1 / 2 ft3min-1

                60Hz: 3.9 m3h-1 / 2.3 ft3min-1

• Ultimate pressure: 2.0 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3.0 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 1.2 x 10-1 mbar / 9.1 x 10-2 Torr
• Ultimate Pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 80 mbar / 60 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 220 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.42 litres
• Oil capacity max: 0.7 litres
• Displacement:

                50Hz: 3.7 m3h-1 / 2.2 ft3min-1

                60Hz: 4.5 m3h-1 / 2.6 ft3min-1

• Speed (Pneurop 6602):

                50Hz: 3.3 m3h-1 / 2 ft3min-1

                60Hz: 3.9 m3h-1 / 2.3 ft3min-1

• Ultimate pressure: 2.0 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3.0 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 1.2 x 10-1 mbar / 9.1 x 10-2 Torr
• Ultimate Pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 80 mbar / 60 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 220 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.