Used Lab Equipment

Features:

The Buchi B-481 Digital Heating Bath is used for vacuumed solvent evaporation, regulated by bath temperature, distillation pressure, flask size, and rotation speed. The B-481 can be adjusted from 20° to 100°C.

Specifications:

• Capacity: 5L

• Temperature: 20°C - 100°C

• Temperature Accuracy: ± 2°C

• Stainless Steel

The Buchi B-490 Heating Bath can accommodate evaporating flasks ranging in size and is suitable for high/low boiling solvents. The Buchi B490’s aluminum heating pan features a corrosion-resistant PTFE coating and an insulated outer wall and two overtemperature shutoffs.

Specifications:

• Temperature Range:20°C - 180°C
• Temperature Accuracy:+1°C
• Power: 115VAC

Specifications:

• Dimensions (W x H x D): 285 x 240 x 300 mm
• Weight: 4 kg
• Operating voltage: 100 - 120 V or 220 - 240 V
• Frequency: 50/60 Hz
• Power consumption: 1700 W
• Heating power: 1300 W
• IP class: 21
• Controlled temperature range: 20 - 180 °C (water and oil)
• Display: Digital; set and actual temperature
• Infrared communication: Yes
• Heating bath temperature lock: Yes
• Temperature deviation: ± 2 °C
• Maximum flask size: 4000 mL
• Approval: CE / CSA

The unit is designed to pass liquid, at a controlled temperature, through jacketed equipment or small open or closed vessels. Proportional control of heater power ensures good short-term temperature stability. Zero-voltage switching prevents interference at radio frequencies. Protection against overheating and loss of water reduce the risk of accidental damage to the unit. The centrifugal pump maintains sufficient pressure to circulate water in the external system whether it is a 12mm bore or smaller.

Specifications: 

• Temperature Range:-20°C to 85°C
• Temperature Stability:+0.05°C
• Internal Capacity: 2 L
• Dimensions:5 x 22.5 x 21 cm
• Weight: 5 kg

Column Heater for Waters Alliance Series

Specifications:

• Temperature Range: 20 to 65 °C in 1 °C increments (5 °C above ambient)

Features:

• Large LCD display screen and interface provides for user-friendly operation
• Easy to set Adjustable Timer (1 minute to 5,999 minutes)
• Maintenance-free operation with easy to clean surface
• Variety of Accessories are available to meet application demands
• Both heater and bath chamber are made of corrosion-resistant stainless steel
• No angle in bath chamber, easy to clean;
• The standard stainless-steel bottom plate, helps prevents direct contact by accessories and tubes to heating element
  and sensors.
• Drain valve makes emptying of bath water fast and easy for cleaning and moving.

Specifications:

• Temperature Range: Ambient +9°F ~ 212°F (Ambient +5°C ~ 100°C)
• Capacity: 10L
• Temperature Fluctuation: ±0.54°F (±0.3°C)
• Tracking Alarm: ≤3.6°F (≤0.2°C)
• Timer: 1~5999 min
• Internal Dimension (W x H x D): 11 x 5.9 x 8.7”
• External Dimension (W x H x D): 13.5 x 14 x 11.2”
• Net Weight: 12 kg
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 750 W

Features:

• Large LCD display screen and interface provides for user-friendly operation
• Easy to set Adjustable Timer (1 minute to 5,999 minutes)
• Maintenance-free operation with easy to clean surface
• Variety of Accessories are available to meet application demands
• Both heater and bath chamber are made of corrosion-resistant stainless steel
• No angle in bath chamber, easy to clean;
• The standard stainless-steel bottom plate, helps prevents direct contact by accessories and tubes to heating element
  and sensors.
• Drain valve makes emptying of bath water fast and easy for cleaning and moving.

Specifications:

• Temperature Range: Ambient +9°F ~ 212°F (Ambient +5°C ~ 100°C)
• Capacity: 20L
• Temperature Fluctuation: ±0.54°F (±0.3°C)
• Tracking Alarm: ≤3.6°F (≤0.2°C)
• Timer: 1~5999 min
• Internal Dimension (W x H x D): 19.3 x 5.9 x 11.8”
• External Dimension (W x H x D): 21.4 x 14 x 13.5”
• Net Weight: 18 kg
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 1450 W

Features:

• Large LCD display screen and interface provides for user-friendly operation
• Easy to set Adjustable Timer (1 minute to 5,999 minutes)
• Maintenance-free operation with easy to clean surface
• Variety of Accessories are available to meet application demands
• Both heater and bath chamber are made of corrosion-resistant stainless steel
• No angle in bath chamber, easy to clean;
• The standard stainless-steel bottom plate, helps prevents direct contact by accessories and tubes to heating element
  and sensors.
• Drain valve makes emptying of bath water fast and easy for cleaning and moving.

Specifications:

• Temperature Range: Ambient +9°F ~ 212°F (Ambient +5°C ~ 100°C)
• Capacity: 5L
• Temperature Fluctuation: ±0.54°F (±0.3°C)
• Tracking Alarm: ≤3.6°F (≤0.2°C)
• Timer: 1~5999 min
• Internal Dimension (W x H x D): 11 x 5.9 x 5.1”
• External Dimension (W x H x D): 13.6 x 13.4 x 7.9”
• Net Weight: 5 kg
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 500 W

Specifications:

• Dimensions: 9.2” x 15” x 15.5” 
• Temperature range: Ambient to +100°C
• Capacity: 10 L

Specifications:

• Capacity: 20 L
• Temperature Range: Ambient to 100°C
• Temperature Control: ±0.1°C between ambient and 100°C
• Temperature Uniformity: ±0.24° at 37°C
• Temperature Stability: ±0.5° at 37°C
• Electrical Requirements: 120V, 50/60Hz, 8.5A

Features:

10 Liter Stainless Steel Open Bath System

Specifications:

• Display: 3.25" LCD
• Languages Supported 5: English 
• Working Temperature Range °C: Ambient +10° to 135° 
• Temperature Stability °C: ±0.07° 
• Temperature Calibration Capability: 1-point 
• Working Access (L x W x D) (cm): 9.9 x 25.5 x 15.2 cm
• Reservoir Capacity (gallons): 2.64
• Reservoir Capacity (liters): 10

The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. Easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration.* High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination.

Specification:

• Temp. Range: Ambient +5 to 100C
• Capacity: 12 Liters
• Temp. Accuracy: +/-0.2C at 37C
• Temp. Increments: +/-0.1C
• Temp. Uniformity: +/-0.2C at 37C
• Dimensions: 18 x 10.5 x 16.2 in.
• Chamber Dimensions: 5.3 x 9.4 x 5.5 in.
• Weight: 157 lbs.
• Electrical: 115V

The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. Easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration.* High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination.

Specification:

• Temp. Range: Ambient +5 to 100C
• Capacity: 2 Liters
• Temp. Accuracy: +/-0.2C at 37C
• Temp. Increments: +/-0.1C
• Temp. Uniformity: +/-0.2C at 37C
• Dimensions: 6.5 x 8 x 6 in.
• Chamber Dimensions: 5.3 x 9.4 x 5.5 in.
• Weight: 4.5 lbs.
• Electrical: 115V

The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. Easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration.* High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination.

Specification:

• Temp. Range: Ambient +5 to 100C
• Capacity: 4 Liters
• Temp. Accuracy: +/-0.2C at 37C
• Temp. Increments: +/-0.1C
• Temp. Uniformity: +/-0.2C at 37C
• Dimensions: 7.7 x 13.9 x 9 in.
• Chamber Dimensions: 5.3 x 9.4 x 5.5 in.
• Weight: 15 lbs.
• Electrical: 115V

The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. Easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL™ feature allows for simple, in-lab calibration.* High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination.

Specification:

• Temp. Range: Ambient +5 to 100C
• Capacity: 8 Liters
• Temp. Accuracy: +/-0.2C at 37C
• Temp. Increments: +/-0.1C
• Temp. Uniformity: +/-0.2C at 37C
• Dimensions: 17.5 x 10.5 x 12.4 in.
• Chamber Dimensions: 5.3 x 9.4 x 5.5 in.
• Weight: 17 lbs.
• Electrical: 115V