Used Lab Equipment

Andor’s Zyla sCMOS camera platform offers high speed, high sensitivity and high resolution imaging performance. The remarkably light and compact, thermoelectrically-cooled design, integrates perfectly into both laboratory and OEM applications alike. Zyla is ideally suited to many cutting-edge experiments that push the boundaries of speed and sensitivity. The unprecedented value and flexibility of the Zyla means it is also redefining the concept of a ‘workhorse’ camera, rapidly displacing interline CCDs as the gold standard microscope detector. A highly cost effective USB 3.0 available representing the ideal performance upgrade for any lab.

Specifications:

• Sensor Type: Front Illuminated Scientific CMOS
• Active Pixels: 2560 x 2160 (5.5 Megapixel)
• Sensor Size: 16.6 x 14.0 mm (21.8 mm diagonal)
• Pixel Readout Rate (MHz): 200 (100 MHz x 2 sensor halves). 560 (280 MHz x 2 sensor halves)
• Read Noise (e-):
• Rolling Shutter: 200 MHz 0.9 [1.2], 560 MHz 1.2[1.6]
• Global Shutter: 200 MHz 2.3[2.5], 560 MHz 2.4[2.6]
• Maximum Quantum Efficiency •3: 60%
• Sensor Operating Temperature:
• Water Cooled: -10ºC*
• Dark Current, e-/pixel/sec @ min temp •4:
• Water Cooled: 0.019
• Readout Modes: Rolling Shutter and Global Shutter (Snapshot)
• Maximum Dynamic Range: 33,000:1
• Photon Response Non-Uniformity (PRNU):
• Half-light Range: < 0.01%
• Low-light Range: <0.1%
• Pre-defined Region of Interest: 2048 x 2048, 1920 x 1080, 1392 x 1040, 512 x 512, 128 x 128
• User Defined ROI (Granularity): Yes (1 pixel) **
• Pixel Size (W x H): 6.5 μm
• Pixel Well Depth (e-): 30,000
• Linearity (%, maximum) •5
• Full-light Range: Better than 99.8%
• Low-light Range (< 1000 electrons signal): Better than 99.9%
• MTF (Nyquist @ 555 nm): 45%
• Anti-blooming Factor: x 10,000
• Hardware Timestamp Accuracy: 25 ns
• Internal Memory: 1 GB
• Data Range: 12-bit (fastest USB 3.0 speeds) and 16-bit (maximum dynamic range)
• Interface Options: USB 3.0 •9 Camera Link 10-tap

Specifications:

• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications Controller: area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features:  Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:  
  • 1 – 100 μl in 0.1 μl increments
  • Up to 1500 μl with multiple draw (hardware modification required)
• Precision:
  • Typically < 0.5 % RSD of peak areas from 5 – 100 μl,
  • Typically < 1 % RSD from 1 – 5 μl
• Sample viscosity range:  0.2 – 5 cp
• Sample capacity:
  • 2 × well-plates (MTP) + 10 × 2 ml vials
  • 100x2ml in one tray
  • 40 x 2 ml in half tray
• Injection cycle time:
  • Typically < 30 s using following standard conditions:
  • Default draw speed: 200 μl/min
  • Default eject speed: 200 μl/min
  • Injection volume: 5 μl
• Carry-over Typically:
  • < 0.01 % using the following conditions:
  • Column: 125 x 4 mm Hypersil ODS, 5 μm
  • Mobile phase: Water/Acetonitrile = 80/20
  • Flow rate: 1 ml/min
  • Injection volume: 1 μl caffeine (1 mg/ml), 5 μl water to test carryover
  • Outside wash of needle before injection: 20 sec with water using flush port

Comprises a 4-channel vacuum container, including 4 tubular plastic membranes, and a vacuum pump.

Specifications:

• Maximum flow rate:
  • 10 ml/min per channel
  • 5-10 ml/min per at reduced degassing performance
• Number of channels: 4
• Internal volume per channel: Typically 12 ml per channel
• Materials in contact with solvent: PTFE, PEEK
• pH range: 1 – 14
• Analog output (AUX): For pressure monitoring, range 0 – 3 V

Can be sold as an individual component or as part of a complete stack

Features:

Microprocessor controller with LED set-and-read at an attractive price makes this model an excellent overall value. The bright LED display is easy to read and continuously displays actual temperature. The set temperature is displayed at the touch of a button. The 2-speed pressure (simplex) pump is used for closed-loop applications

Specifications:

Capacity: 6 liters

• Temperature Range: Ambient + 5°C to 150°C
• 120V
• 60Hz
• Reservoir Capacity: 28 liters
• Pressure Flow Rate: 2-speed (Simplex Pump), 7 or 15 liters/min.
• Working Access,L x W x D 12-1/8 x 10-3/4 x 8 in. 30.8 x 26.4 x 20.3 cm

Specifications:

• Digital Controller
• 1000W heater
• Temperature range ambient +5C up to 200C
• 6L chamber capacity

Specifications:

• Temperature range: –20 to 100°C (–4 to 212°F)
• Cooling capacity: 200W at 20°C (68°F), 140W at 0°C (32°F), and 100W at –10°C (14°F
• Capacity: 6 liters (1.6 gal)
• Heater: 1000W
• Analog Controller

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation for LC systems.

The specially-designed thermostattable sample trays holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials.

The autosampler thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting. The thermostatted air enters the autosampler through a recess underneath the specially-designed sample tray. The air is then distributed evenly through the sample tray ensuring effective temperature control, regardless of how many vials are in the tray. In cooling mode condensation is generated on the cooled side of the Peltier elements. This condensed water is safely guided into the leak system.

Specifications:

• Weight: 20.7 kg (46 lbs)
• Dimensions (width × depth × height): 140 × 345 × 435 mm (5.5 × 13.5 × 17 inches) 
• Line voltage: 100 – 240 VAC, ± 10%
• Line frequency: 50 or 60 Hz, ± 5%
• Power consumption: 260 VA / 210 W / 717 BTU
• Ambient operating temperature: 4 – 55 °C (41 – 131 °F)  
• Ambient non-operating temperature: -40–70 °C (-4–158 °F)
• Humidity: < 95%, at 25–40 °C (77–104 °F)
• Operating Altitude: Up to 2000 m (6500 ft)
• Non-operating altitude: Up to 4600 m (14950 ft)
• Temperature range: setable from 4 °C to 40 °C in 1 ° increments 
• Temperature accuracy at ambient temperatures < 25 °C and humidity < 50%: - 1°C to + 4 °C at a setpoint of 4 °C
• Temperature accuracy at ambient temperatures > 25 °C and/or humidity > 50%: - 1°C to + 5 °C at a setpoint of 4 °C 

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation

for LC systems.

Specifications:

• Weight: 15.5 kg (34.2 lbs)
• Dimensions (height × width × depth): 200 × 345 × 440 mm (8 × 13.5 × 17 inches)
• Line voltage: 100 – 240 VAC, ±10 % Wide-ranging capability
• Line frequency: 50 or 60 Hz, ±5 %
• Power consumption (apparent power): 300 VA Maximum
• Power consumption (active power): 200 W Maximum
• Ambient operating temperature: 4 to 55 8C (41 to 131 8F)
• Ambient non-operating temperature: -40 to 70 8C (-4 to 158 8F)
• Humidity: < 95 %, at 25 to 40 8C (77 to 104 8F) Non-condensing
• Operating Altitude: Up to 2000 m (6500 ft)
• Non-operating altitude: Up to 4600 m (14950 ft) For storing the autosampler

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation

for LC systems.

Specifications:

• Weight: 15.5 kg (34.2 lbs)
• Dimensions (height × width × depth): 200 × 345 × 440 mm (8 × 13.5 × 17 inches)
• Line voltage: 100 – 240 VAC, ±10 % Wide-ranging capability
• Line frequency: 50 or 60 Hz, ±5 %
• Power consumption (apparent power): 300 VA Maximum
• Power consumption (active power): 200 W Maximum
• Ambient operating temperature: 4 to 55 8C (41 to 131 8F)
• Ambient non-operating temperature: -40 to 70 8C (-4 to 158 8F)
• Humidity: < 95 %, at 25 to 40 8C (77 to 104 8F) Non-condensing
• Operating Altitude: Up to 2000 m (6500 ft)
• Non-operating altitude: Up to 4600 m (14950 ft) For storing the autosampler

Features:

The Branson 1510R-MTH Ultrasonic Cleaner is designed for reliable and durable performance. The ultrasonic cleaner is safe enough for delicate jewelry and powerful enough to remove proteins, buffing compounds and heavy oils. This ultrasonic cleaner has a mechanical timer with heat.

Specifications:

• Frequency: 40kHz
• Weight: 7 lb.
• Tank capacity: .5 gal
• Dimensions: 12" W x 11.5" L x 10" D (30.48 x 29.21 x 25.4 cm)
• Tank dimensions: 5.5" W x 6" L x 4" D (13.97 x 15.24 x 10.16 cm)

Outfit your lab with an industry classic, heated cleaner that delivers the same ultrasonic power even when load conditions change. Additionally, fisherbrand CPXH Series Ultrasonic Tabletop Cleaners offer rock-solid construction plus a hi-tech design and will provide you with years of reliable use.

• Sweep frequency
• Digital controls with heat, set to 69°C (156.2°F) set on either Fahrenheit or Celsius
• High/lower power adjustment
• 99 minute or continuous operation
• Degass period up to 99 minutes
• Constant power tracking adjusting for changes to ensure consistent performance for years of reliable use

Features:

Water Bath and Circulators

Specifications:

• Capacity: 17L
• Temperature range: 12C above ambient- 200C
• Pump flow rate: 15L/min
• Electrical: 115V, 60Hz, 1 PH, 16 Amps

Features:

The EM range of oil-sealed rotary pumps is renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and the ability to withstand vapour. They are commonly used for laboratory and light industrial applications. It is a freestanding instrument with the drive provided through a flexible coupling by either a single phase or three phase motor.

Specifications:

• Displacement:

                  50Hz: 20.5 m3h-1 /12.1 ft3min-1
                  60Hz: 25.0 m3h-1 /14.7 ft3min-1

• Speed (Pneurop 6602):

                   50 Hz: 17.0 m3h-1 /10 ft3min-1
                   60Hz: 20.4 m3h-1 /12.1 ft3min-1

• Ultimate vacuum (total pressure): 

                   without gas purge: 1 x 10-3 mbar /7.4 x 10-4 Torr
                   with gas purge: 1.5 x 10-1 mbar /1.1 x 10-2 Torr
                   with Fomblin: 1 x 10-2 mbar /7.5 x 10-3 Torr

• Inlet connection: NW25
• Outlet connection: Nozzle 15mm external Ø removable from 3/4 in BSP tapped hole
• Max permitted pressure at outlet: 0.5 bar gauge /7 psig
• Max inlet pressure for water vapour: 20 mbar / 15 Torr
• Max water vapour pumping rate: 0.3 kg h-1
• Operating temp range: 13-40°C
• Nominal Rotation speed 50/60Hz: 1440 /1720 rpm
• Power connector 1-ph: IEC EN 60320 C19
• Motor power 50Hz: 0.55 kW
• Motor power 60Hz: 0.75 kW
• Noise at 50Hz: 57 dB(A)
• Oil capacity max: 1.05 litre
• Oil capacity min: 0.75 litre
• Recommended oil: Ultragrade 19
• Thermal overload device: prevents overheating (single phase only).
• The drive is provided through a flexible coupling: by a single‑phase or three‑phase (four pole) motor.
• The motors: are totally enclosed and are cooled by the motor cooling fan.
• Full height O ring sealed oil sight glass: for easy checking of oil level and condition

Features:

Ideal for industrial, clinical, pharmaceutical or biomedical applications

Microprocessor PID Control

• ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C
• Display shows °C or °F; easy to read from across the room

Safety Features

• Low profile and front-panel controls for easier access, safer operation
• Dual thermostats guard against thermal runaway
• Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors
• Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware
• Heating elements will not burn out if bath accidentally runs dry

Construction

• Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating
• Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals
• Exterior stays cool even after hours of operation Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination
• Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier
• Choice of acrylic or stainless-steel covers

Specifications:

• Capacity: 0.5 gal., 2L
• Temperature Range (Metric): Ambient to 100°C
• Resolution (Temperature): 0.1°C/F
• Temperature Stability: ±0.5°C
• Dimensions (L x W x H) Exterior: 9.88 x 10.75 x 7.62 in. (25 x 27 x 19cm)
• Dimensions (D x W x H) Interior: 5.25 x 5.88 x 6 in. (13 x 14.8 x 15cm)

The Parker 20H high purity hydrogen gas generators offer the optimum combination of safe operation, reliability and performance. Utilising field proven PEM cell technology, hydrogen is produced on demand from deionised water and electricity, at low pressure and with minimal stored volume. Innovative control software allows unrivalled operational safety and reliability. The H generators ideally supply fuel gas to all known GC combustion detectors used in today’s laboratory workflows. Three models operate at flow rates; 160 ml/min, 250 ml/min and 500 ml/min. Hydrogen generators are available with Remote Networking software. RemoteNet allows up to 27 hydrogen generators to be actively controlled from one central PC, and facilitates true cascading capabilities.

Specification:

• Flow Rate: 160 ml/min
• Purity: >99.9995%
• Water Consumption (27/7, full flow): 1.25 L/week
• Delivery Pressure: 0.3-6.89 bar g / 5-100 psi g
• Ambient Temperature Range: 5 - 40°C (41 - 104°F)
• Water Supply Pressure: 0.1 bar g / 1.45 psi g
• Water Supply Flow Rate: 1 L/min
• Water Quality: Deionised. ASTM II, >1MΩ, <1µs, filtered to <100µm
• Supply Voltage Range: 90 - 264V 50/60Hz

• Port Connections

• Hydrogen Outlet: 1/8” Compression Fitting
• Water Drain: Quick Release Push in Fitting
• Water Fill: Quick Release Push in Fitting
• Dimensions (H x W x D): 456 x 342 x 437 mm (17.9 x 13.5 x 17.2 in.)
• Weight: 19 kg / 41.9 lb (full of water: 23 kg / 50.7 lb)