Used Lab Equipment

• Specifications:

  • Chamber size: 16.5 x 14.5 x 14”
  • Chamber capacity: 1.9 cubic foot
  • Heater: 5-sided heating
  • Temperature control range: Ambient to 480°F
  • Warm-up time to 100°F: 45 minutes
  • Weight: 140lbs
  • Unit dimensions: 28 x 20 x 21.75”
  • Safety: Built in circuit breaker, overheat shutoff protection, and secondary over-temp protection dial

Specifications:

• Capacity: 50 L
• Flow rate: 144 L/min
• Dimensions: 75” x 58” x 81” (W x D x H)
• Weight: 216 lbs (98 kg)

Features:

Ideal for industrial, clinical, pharmaceutical or biomedical applications

Microprocessor PID Control

• ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C
• Display shows °C or °F; easy to read from across the room

Safety Features

• Low profile and front-panel controls for easier access, safer operation
• Dual thermostats guard against thermal runaway
• Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors
• Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware
• Heating elements will not burn out if bath accidentally runs dry

Construction

• Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating
• Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals
• Exterior stays cool even after hours of operation Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination
• Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier
• Choice of acrylic or stainless-steel covers

Specifications:

• Capacity: 0.5 gal., 2L
• Temperature Range (Metric): Ambient to 100°C
• Resolution (Temperature): 0.1°C/F
• Temperature Stability: ±0.5°C
• Dimensions (L x W x H) Exterior: 9.88 x 10.75 x 7.62 in. (25 x 27 x 19cm)
• Dimensions (D x W x H) Interior: 5.25 x 5.88 x 6 in. (13 x 14.8 x 15cm)

Specifications

• Amperage: 5.8A
• Capacity (English): 2.64 gal.
• Length (English) Exterior: 16.53 in.
• Length (Metric) Exterior: 42cm
• Resolution (Temperature): ±0.1°C
• Temperature Stability: ±0.5°C
• Capacity (Metric): 10L
• Temperature Range (Metric): Ambient to 100°C

Microprocessor PID Control

• ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C
• Display shows °C or °F; easy to read from across the room

Safety Features

• Low profile and front-panel controls for easier access, safer operation
• Dual thermostats guard against thermal runaway
• Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors
• Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware
• Heating elements will not burn out if bath accidentally runs dry

Construction

• Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating
• Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals
• Exterior stays cool even after hours of operation Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination
• Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier
• Choice of acrylic or stainless-steel covers

Model 210

• With drain pump to empty reservoir

Includes Computer Loaded with 4000 Series Explorer Software Version 3.5.

The 4800 MALDI TOF/TOF Analyzer is a next-generation tandem time-of-flight MS/MS system that gives you all the advantages of MALDI in a flexible, easy-to-use, ultra-high-performance mass spectrometer.

• OptiBeam™ on-axis laser provides ten times greater sensitivity to identify and quantitate low-abundance proteins in complex biological samples.
• High-resolution precursor ion selection, enabled by the QuanTIS precursor selector, lets you detect and identify peptides that other systems miss and makes it easier for you to interpret your data by simplifying MS/MS spectra.
• Ideal solution for high sensitivity putative protein biomarker identification and quantitation.
• Fully supports LC MALDI workflows, allowing you to mass analyze without the time constraints of LC.
• Simple experiment setup and fast mass analysis maximizes laboratory productivity.
• High-energy, information-rich fragmentation patterns unavailable on other instrument platforms enable you to analyze carbohydrates, lipids, and other biological components.

Identify and Quantitate Putative Protein Biomarkers with Confidence
The 4800 MALDI TOF/TOF analyzer offers a new level of sensitivity for identifying and quantifying low abundance putative protein biomarkers. Fully compatible with novel iTRAQ™ reagents, the 4800 analyzer provides the most direct path to protein biomarker discovery. An expanded dynamic range enables high confidence identification and quantitation of low-level putative protein biomarkers in complex matrices. Powerful, easy-to-use GPS Explorer™ provides simplified, automated workflows to get you more quickly from discovery to validation.

The Only MALDI TOF/TOF™ Analyzer with On-Axis Laser Irradiation
The 4800 Analyzer is the only MALDI TOF/TOF mass spectrometer with on-axis laser irradiation, enabling sensitivity in the attamole range. Proprietary source modeling algorithms enable low ppm mass detection across the MALDI plate.

Expand Workflows, Increase Throughput
Get the speed, stability, and reliability you need to expand your current experimental workflows and add statistical significance to your experimental results. Quickly and easily increase throughput using automation features that allow you to rapidly and confidently collect the MS/MS spectra that really matter —and not waste valuable resources acquiring and evaluating those that don't.

Features:

• Motic’s new AE2000 Inverted Microscope is designed for routine live cell inspection with an easy and flexible set up, ideal for University, routine-clinical, and lab environments. The model’s main applications offer superior image quality when viewing cell cultures in microbiology, living organisms and tissue culture samples.

  The newly designed Binocular Ergo tubes with 360° swiveling “butterfly” design offers the most comfortable observation position, especially useful for prolonged sample viewing. The auto on/off function of the power supply extends the lifespan of the sample and light bulb and at the same time saves energy. Another added feature, a modular interchangeable illumination concept, allows for the easy transition from Halogen to LED to fulfill a wide-range of customer viewing expectations. The improved phase contrast quality of the model makes the instrument suitable for a greater range of applications that demand precision optics. The entire microscope including optical system is manufactured now completely Lead Free, following the International RoHS regulations.

• Binocular head Siedentopf type 45° inclined, 360º swiveling
• Widefield high eyepoint eyepieces N-WF 10X/20mm with diopter adjustment and rubber eyecups
• Side facing quadruple nosepiece
• CCIS Plan Achromatic objectives PL4X, LWD PL40X
• CCIS Plan Achromatic Phase objectives PL Ph10X, LWD PL Ph20X
• ELWD condenser N.A. 0.30
• Phase slider Ph1, BF
• Phase centering telescope
• Plain stage with metal & glass stage inserts
• Halogen illumination 6V/30W with intensity control and sleeping mode

A revolutionary design packed with features, the AE2000 sets a new benchmark in affordable inverted microscopy.

Motic’s new AE2000 Inverted Microscope is designed for routine live cell inspection with an easy and flexible set up, ideal for University, routine-clinical, and lab environments. The model’s main applications offer superior image quality when viewing cell cultures in microbiology, living organisms and tissue culture samples.

The newly designed Binocular Ergo tubes with 360° swiveling “butterfly” design offers the most comfortable observation position, especially useful for prolonged sample viewing. The auto on/off function of the power supply extends the lifespan of the sample and light bulb and at the same time saves energy. Another added feature, a modular interchangeable illumination concept, allows for the easy transition from Halogen to LED to fulfill a wide-range of customer viewing expectations. The improved phase contrast quality of the model makes the instrument suitable for a greater range of applications that demand precision optics.

The entire microscope including optical system is manufactured now completely Lead Free, following the International RoHS regulations.

Features:

• AE2000 Binocular Inverted Microscope with PL PH 20x
• Binocular head Siedentopf type 45° inclined
• Widefield high eyepoint eyepiece 10X / 20mm (paired), focusable
• Side facing quadruple nosepiece
• CCIS Plan Achromat objective PL PH4x, PL PH 10x, PL PH 20x
• ELWD N.A. 0.30 condenser
• Phase slider Ph0, BF, Ph1
• Centering telescope
• Plain Stage with metal & glass stage inserts
• Halogen illumination 6V/30W with intensity control
• 45mm blue, Green Interference and Diffusion filters with filter slider
• Allen hexagonal key, vinyl dust cover, power cord
• Universal Power Supply 100-240V

A revolutionary design packed with features, the AE2000 sets a new benchmark in affordable inverted microscopy.

Motic’s new AE2000 Inverted Microscope is designed for routine live cell inspection with an easy and flexible set up, ideal for University, routine-clinical, and lab environments. The model’s main applications offer superior image quality when viewing cell cultures in microbiology, living organisms and tissue culture samples.

The newly designed Binocular Ergo tubes with 360° swiveling “butterfly” design offers the most comfortable observation position, especially useful for prolonged sample viewing. The auto on/off function of the power supply extends the lifespan of the sample and light bulb and at the same time saves energy. Another added feature, a modular interchangeable illumination concept, allows for the easy transition from Halogen to LED to fulfill a wide-range of customer viewing expectations. The improved phase contrast quality of the model makes the instrument suitable for a greater range of applications that demand precision optics.

The entire microscope including optical system is manufactured now completely Lead Free, following the International RoHS regulations.

Features:

• AE2000 Binocular Inverted Microscope with PL PH 20x
• Binocular head Siedentopf type 45° inclined
• Widefield high eyepoint eyepiece 10X / 20mm (paired), focusable
• Side facing quadruple nosepiece
• CCIS Plan Achromat objective PL PH4x, PL PH 10x, PL PH 20x
• ELWD N.A. 0.30 condenser
• Phase slider Ph0, BF, Ph1
• Centering telescope
• Plain Stage with metal & glass stage inserts
• Halogen illumination 6V/30W with intensity control
• 45mm blue, Green Interference and Diffusion filters with filter slider
• Allen hexagonal key, vinyl dust cover, power cord
• Universal Power Supply 100-240V

Features:

• Simple column selection with huge built-in library
• Automatic titration of buffers across a broad pH range
• Quick and easy transfer of methods to production-scale
• UNICORN method wizard High performance purification and characterization
• State-of-the-art computer-controlled pumps, UV/conductance monitors, and fraction collector
• UV-Vis detection of up to three wavelengths simultaneous

Specifications:

• Flow rate: 0.01-100 ml/min
• Operating pressure max.: 10 MPa
• Tubing i.d. (flow path): 0.75 mm
• UV wavelength: 190-700 nm
• Flow cell path length: 2 mm
• pH monitoring: 2–12
• Buffer selection: 11 buffer inlets
• Relative humidity: 10%-95% (non condensing)
• pH Stability: 1-14
• Viscosity: max 5 cP
• Multiple wavelength detection: Yes, up to 3 wavelengths
• Multiple sample injection: Yes, up to 8 samples
• Autosampler injection: Optional
• Automatic buffer preparation: BufferPrep
• Pump type: Piston pump, metering type
• Application: Purification of microgram to gram quantities of protein
• Dimensions (W x H x D): 480 x 610 x 470 mm
• Power Requirements: 100-120/220-240 VAC, 600W

Features:

• Multiple collection modes: Fluorescence, phosphorescence, chemi/bio-luminescence, and time resolved phosphorescence measurements can all be easily made without changing a single hardware component
• Lowest cost of ownership: The Cary Eclipse is so robust and reliable that every new instrument comes with a 10-year lamp life guarantee, reducing ongoing expenses to virtually zero. 
• Improved laboratory safety: Additionally the guaranteed exceptionally long lifetime of the lamp in the Cary Eclipse eliminates lamp replacements, a hugely time-consuming and potentially hazardous operation.
• Easy to use: Modular, application-specific software, which satisfies the needs of novice and expert users alike, and the ability to switch between measurement modes without touching the hardware, ensure that any user can quickly get reliable, accurate results with minimal training.
• Expand your analytical capabilities: The superior, unique design of the Cary Eclipse ensures room light immunity allowing the instrument to operate with the front and top panels removed for easy access to sample and fast installation of large accessories.
• Proven sensitivity where you need it most: Optimized design coupled with unique, high-sensitivity optics and detectors ensure that the Cary Eclipse gives you the performance that you need right across the spectrum. 
• Robustness, reliability and sensitivity: Engineered to be the most robust instrument on the market, the Cary Eclipse incorporates the unique Agilent xenon flash lamp to capture a data point every 12.5 ms and scans at 24,000 nm/min without peak shifts perfect for high throughput laboratories and fast kinetics applications.
• Unique Sampling: By incorporating Agilent’s unique capacity to guarantee room light immunity coupled with the highly accurate and reproducible Peltier temperature control, the Cary Eclipse delivers unique sampling opportunities that will expand your analytical capabilities, simplify your workflow and increase your sample throughput.
• Reliable Results: The Cary Eclipse only illuminates the sample when data is actually being acquired. This means that the Cary Eclipse prevents your valuable samples from photodegradation and preserves their integrity to the point that you can measure them over and over again and continue to get the same, reliable result. 

Specifications:

• Dimensions(WxDxH): 60 x 64 x 27 cm (23 x 25 x 10 inches)
• Sensitivity:> 500:1 RMS, 500 nm excitation, excitation and emission slits 10 nm / > 750:1 RMS, 350 nm excitation, excitation and emission slits 10 nm
• Wavelength(s):190 - 1100 nm
• Temperature Range: 10 – 35°C
• Optical System: Cerny-Turner 0.125 m Monochromators
• Light Source: Xenon Flash Lamp
• Software: Cary Eclipse Software

The Baker EdgeGARD clean bench is ideal for IV admixture preparation, drug compounding, plant cell culture, media preparation, pharmaceutical procedures, electronic assembly, and limited experimental research.

Features:

• Length: Six Feet
• Class 100 cleanliness
• Laminar air flow across work surface - 100 FPM
• Console Style
• Stainless Steel Interior
• Fluorescent Light
• High velocity return air slots for maximum product protection
• HEPA filter captures 0.3 micrometer particulates - in good operating condition
• Interior Dimensions: 70.5 x 22 x 34 1/8 inches

Caution:

A clean bench is not designed to protect personnel or the environment from potentially harmful agents. The adequacy of this product for the user's personal safety, as with any clean bench, should be determined by an industrial hygienist or safety officer

Includes PM From BD and Guaranteed Installable under BD Service Contract

Upgraded to IIu and Added Violet laser in 2014

The new BD FACSAria II cell sorter improves ease of use, flexibility, and aseptic capability to make it the best choice for consistent results in sorting across a broad range of applications. The heart of this cell sorting revolution is the true fixed-alignment flow cell, gel-coupled to the collection optics. Fixed alignment minimizes startup time and improves reproducibility. Gel coupling to the objective lens improves collection efficiency and increases the sensitivity and resolution needed for multicolor applications.

The BD FACSAria II cell sorter advances cell sorting with multiple improvements. A new fluidics design improves aseptic setup and cleaning. New nozzle sizes enable a wide range of particles to be sorted. Software improvements dramatically cut the time spent on cytometer setup, adjustment, and maintenance.

The BD FACSAria II cell sorter also sets a new standard for ease of use to improve both workflow and productivity. A new nozzle design allows for reproducible insertions. A new universal sort tube collection mount makes it easier to insert and remove tube holders. Software wizards and automation simplify aseptic sort setup, drop-delay determination, and clog detection. Compatibility with BD digital analyzers makes it easier to move from analysis to cell sorting.

Includes:

• 3 lasers
• Blue 7PMTs, Red 3PMTs, Violet 3 PMTs
• Computer w/ FACSDiva 8 Software
• ACDU
• 2 monitors
• Fluidics Cart

• Temperature Control
• Lauda Chiller

Performance

Fluorescence Sensitivity

• Measurements performed at 70 psi and 90 kHz using SPHERO Rainbow Calibration Particles (RCP-30-5A)
• FITC: 125 molecules of equivalent soluble fluorochrome (MESF-FITC)
• PE: 125 molecules of equivalent soluble fluorochrome (MESF-PE)

Fluorescence Resolution

• Coefficient of variation (CV)
• PI: Area, <3.0%, full G0/G1 peak for propidium iodide (PI)-stained chicken erythrocyte nuclei (CEN)
• Hoechst: Area, <3.5%, full G0/G1 peak for Hoechst-stained CEN

Fluorescence Linearity

• Doublet/singlet ratio:
• CEN stained with PI: 1.95–2.05 (off the 488-nm laser) or Hoechst: 1.95–2.05 (off the 405-nm laser)

Forward and Side Scatter Sensitivity

• Sensitivity enables separation of fixed platelets from noise, identification of bacteria, and detection of 0.5-micron beads.

Forward and Side Scatter Resolution

• Scatter performance is optimized for resolving lymphocytes, monocytes, and granulocytes.

Sample Acquisition Rate

• Maximum acquisition rate (events per second) with 12 compensation pairs and 8 parameters: 70,000.

Includes 1 year warranty

Features:

The Genius NM32LA is the pinnacle of the Genius series. With many thousands of units in the field, the NM32LA has become the proven and reliable nitrogen generator of choice in countless laboratories across the world. The NM32LA delivers up to 32 liters per minute of nitrogen gas, suitable for most Liquid Chromatography and Mass Spectrometry instruments available today.

Specifications:

• Dimensions (HxWxD): (28.1 x 23.6 x 29.5 inches)
• Gas Type: Nitrogen
• Gas Flow: 32L/min
• Outlet Pressure: 100 psi
• Voltage: 110/230 ± 10%VAC
• Frequency: 50/60Hz
• Current: 11/7 amps
• StartUp Time: 30 Mins

The patented, motor-driven front window offers optimum contamination protection and fully seals the cabinet in its lowest position, while the interior is designed for ease of cleaning. All models come standard with transparent side windows for enhanced ergonomics

Features:

• 5’ Class 2 Hood Type A/B3
• Especially designed for work with dangerous biological substances.
• Optimum contamination protection.
• High product and personal operator protection from contamination.
• Vertical laminar air flow and air intake (air curtain) across front opening
• Modular design for flexible, individually orientated use.

Andor’s iKon-M 934 series cameras are designed to offer the ultimate in high-sensitivity, low noise performance, ideal for demanding imaging applications. These high resolution 1024 x 1024 CCD cameras boast up to 95% QEmax, high dynamic range, 13 μm pixels and exceptionally low readout noise. The iKon-M benefits from negligible dark current with industry-leading thermoelectric cooling down to -100°C. The ‘Deep Depletion’ sensor option offers ultimate performance for NIR applications, the new Dual AR coating extends the QE performance significantly across the UV/visible region of the spectrum for the broadest possible spectral coverage from one sensor. Fringe Suppression Technology radically minimizes etaloning effects in the NIR. Rapid vertical shifts combined with fast kinetics acquisition mode, comprehensive trigger modes and custom coated wedge window options, render the deep Depletion models ideal for NIR

optimized Bose Einstein Condensation applications.

Features and Benefits:

• Extended range Dual-AR option: Superior UV-NIR broadband back-illuminated QE
• TE cooling to -100°C: Critical for elimination of dark current
• Fringe Suppression Technology: NIR etaloning greatly reduced (BR-DD and BEX2-DD sensor types)
• Up to 5 MHz pixel readout: High frame rates achievable
• Ultra low noise readout: Intelligent low-noise electronics offer the most ‘silent’ system noise performance available
• UltraVac: Critical for sustained vacuum integrity and to maintain unequalled cooling and QE performance, year after year
• 13 x 13 μm pixel size: Optimal balance of dynamic range and resolution
• Integrated shutter: C-mount shutter as standard. Closed during readout to avoid vertical smear
• Cropped Sensor Mode: Specialized acquisition mode for continuous imaging with fastest possible temporal resolution
• Enhanced Baseline Clamp: Quantitative accuracy of dynamic measurements
• USB 2.0 connection: Simple Plug & Play connection
• Integrated in EPICS: Platform is fully integrated into the EPICS control software

Specifications:

• Active pixels: 1024 x 1024
• Sensor size: 13.3 x 13.3 mm
• Pixel size (W x H): 13 μm x 13 μm
• Active area pixel well depth: 100,000 e- (130,000 e- for BR-DD and BEX2-DD models)
• Pixel readout rates (MHz): 5, 3, 1, 0.05
• Read noise: 2.9 e-
• Maximum cooling: -100°C
• Frame rate: 4.4 fps (full frame)
• System window type: UV-grade fused silica, ‘Broadband VUV-NIR’, wedged
• Interface: USB 2.0