Used Lab Equipment

Specifications:

• Free air displacement: 138 L/min @ 50Hz
• Normal pumping speed: 7.51 L/min @ 50Hz
• Guaranteed ultimate pressure: 1x10-4torr
• Sound level: 50 dBA
• Motor/pump speed: 1425 RPM @ 50Hz
• Motor horsepower: 0.5hp
• Pump weight: 48lbs (22kg)

Description:

Refrigeration service pump is designed for removing air and moisture from industrial and commercial chillers. Pump includes a gas ballast valve that inhibits condensation reducing corrosion, an On/Off switch, 3-wire cord, and oil.

Specifications:

• Displacement: 7.7 cfm
• Ultimate Pressure Torr: 3 x 10-4
• Intake Male SAE Flare: 3/4
• NPT Inlet: 3/4"
• Voltage: 115/230
• Amps AC: 6.8/3.4
• Dimensions (L x H x W): 20.5” x 10.75” x 7.125”
• Hz: 60

These accurate and reliable chambers are ideal for long-term high temperature and relative humidity (RH) testing. Designed to provide a wide range of environments, these units are suitable for both industrial and biotechnology specification testing, specifically continuous-duty projects.  All models are equipped with a gentle horizontal air flow system, which ensures stable, top-to-bottom temperature and RH uniformity. Low temperature models 9005L and 9010L feature CFC-free refrigerant. Relative humidity range may vary depending on temperature set point.  Digitally set, microprocessor temperature and humidity controllers allow precise setting with direct digital read-out in degrees and percentage RH.  The over-temperature safety control prevents possible damage to samples or equipment. A vapor generator compresses moisture and injects it into the chamber to provide controlled humidification. Automatic water level control maintains liquid level in humidity reservoir. Pressure coupling allows for easy hook-up of in-line plumbing or a carboy of distilled water. All units feature interior drain.

Specifications:

• Temp range: 40 to 70°C
• Capacity: 9 cu ft.
• Humidity range: 5% above ambient to 95% RH.
• Inside dimensions: 30"W x 20"D x 30"H.
• Interior: Stainless steel.
• Shelves: 2 shelves

Features:

• Temperature range: 2° to 7°C (36° to 45°F)
• CFC-free (R134A) refrigerant
• Manual defrost
• 240w compressor
• Static condenser free of electric fans
• Key-locked door with flat door liner, mounted to open from left
• Seamless, easy-to-clean interior, vacuum-formed from refrigeration-grade plastic
• Exterior baked-on acrylic enamel
• Exterior dimensions: 24.5L x 23.5W x 33 in.H (62 x 60 x 84cm)†.
• Interior dimensions: 13D x 19W x 27.5 in.H (33 x 48 x 70cm). Net weight, 90 lb. (40.8kg)
• Shipping weight, 120 lb. (54.5kg).
• For 120V 60Hz, 2A; 15A breaker.

Features:

• Loop volume 5-1000µl
• 96 vials 1.5 ml vial capacity
• A-900 autosampler designed for use with AKTA
• Syringes 100 - 1000 µl
• Built-in compressor

Features:

The A3 Atomic Absorption Spectrometer is a high performance automated instrument designed to meet the requirements of the modern laboratory. Due to its versatility and performance it can be used for a wide range of applications. 

Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection. 

The graphite head is fixed into the optical path to maximize performance and eliminate drift. The temperature of the transversely heated graphite tube is accurately controlled by means of a precision feedback system. Pyrolytically coated platform tubes are supplied as standard to improve the performance and eliminate many analytical problems associated with this technique. 

The flame and graphite furnace can be changed over by a simple selection in versatile AA Win Pro software.

â—† Easy to use, complete software control

â—† Integrated safety precautions for user protection

â—† Flexible configuration for a wide array of industrial apps

â—† Time-saving high speed analysis

Specifications:

Spectrometer System

• Model:Flame AA System-A3F, Graphite AA System-A3G, 

  Combined Flame and Graphite Furnace AA System-A3FG

• Wavelength range: 190-900 nm
• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)
  
• Modulation: Square wave pulse
• Modulation frequency:
  • 100 hz self reversal (SR) background
  • 400 hz Deuterium Arc (D2) background

Monochromator 

• Grating: 1800 grooves/mm diffraction grating
• Blazed: wavelength 250 nm
• Focus: 300 nm
• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm
• Scan mode: Automatic
• Photometric type: Single beam
• Wavelength accuracy: ±0.15 nm
• Wavelength resolution: 0.2 nm±0.02 nm
• Wavelength reproducibility: <0.05 nm
• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm
• Baseline stability: 0.005 A/30 min
• Stray light: ≤0.12 %T (220 nm NaI, 340 nm NaNO2)

Graphite Furnace Analysis

• Graphite head: Transversally heated
• Temperature range: Ambient-2650 ℃
• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning
• Feedback : Voltage and optical temperature control feedback
• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs
• Detection limit: Cd<0.004 ng/ml
• Repeatability:
  Cu<2.0 % , Cd<2.0 %
• Graphite tubes: Pyrolytically coated with platform
• Sample size: Up to 20μl
• Graphite cooling: Water circulator available

Features:

The A3 Atomic Absorption Spectrometer is a high performance automated instrument designed to meet the requirements of the modern laboratory. Due to its versatility and performance it can be used for a wide range of applications. 

Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection. 

The graphite head is fixed into the optical path to maximize performance and eliminate drift. The temperature of the transversely heated graphite tube is accurately controlled by means of a precision feedback system. Pyrolytically coated platform tubes are supplied as standard to improve the performance and eliminate many analytical problems associated with this technique. 

The flame and graphite furnace can be changed over by a simple selection in versatile AA Win Pro software.

â—† Easy to use, complete software control

â—† Integrated safety precautions for user protection

â—† Flexible configuration for a wide array of industrial apps

â—† Time-saving high speed analysis

Specifications:

Spectrometer System

• Model:Flame AA System-A3F, Graphite AA System-A3G, 

  Combined Flame and Graphite Furnace AA System-A3FG

• Wavelength range: 190-900 nm
• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)
  
• Modulation: Square wave pulse
• Modulation frequency:
  • 100 hz self reversal (SR) background
  • 400 hz Deuterium Arc (D2) background

Monochromator 

• Grating: 1800 grooves/mm diffraction grating
• Blazed: wavelength 250 nm
• Focus: 300 nm
• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm
• Scan mode: Automatic
• Photometric type: Single beam
• Wavelength accuracy: ±0.15 nm
• Wavelength resolution: 0.2 nm±0.02 nm
• Wavelength reproducibility: <0.05 nm
• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm
• Baseline stability: 0.005 A/30 min
• Stray light: ≤0.12 %T (220 nm NaI, 340 nm NaNO2)

Graphite Furnace Analysis

• Graphite head: Transversally heated
• Temperature range: Ambient-2650 ℃
• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning
• Feedback : Voltage and optical temperature control feedback
• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs
• Detection limit: Cd<0.004 ng/ml
• Repeatability:
  Cu<2.0 % , Cd<2.0 %
• Graphite tubes: Pyrolytically coated with platform
• Sample size: Up to 20μl
• Graphite cooling: Water circulator available

Features:

The A3 Atomic Absorption Spectrometer is a high performance automated instrument designed to meet the requirements of the modern laboratory. Due to its versatility and performance it can be used for a wide range of applications. 

Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection. 

The graphite head is fixed into the optical path to maximize performance and eliminate drift. The temperature of the transversely heated graphite tube is accurately controlled by means of a precision feedback system. Pyrolytically coated platform tubes are supplied as standard to improve the performance and eliminate many analytical problems associated with this technique. 

The flame and graphite furnace can be changed over by a simple selection in versatile AA Win Pro software.

â—† Easy to use, complete software control

â—† Integrated safety precautions for user protection

â—† Flexible configuration for a wide array of industrial apps

â—† Time-saving high speed analysis

Specifications:

Spectrometer System

• Model:Flame AA System-A3F, Graphite AA System-A3G, 

  Combined Flame and Graphite Furnace AA System-A3FG

• Wavelength range: 190-900 nm
• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)
  
• Modulation: Square wave pulse
• Modulation frequency:
  • 100 hz self reversal (SR) background
  • 400 hz Deuterium Arc (D2) background

Monochromator 

• Grating: 1800 grooves/mm diffraction grating
• Blazed: wavelength 250 nm
• Focus: 300 nm
• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm
• Scan mode: Automatic
• Photometric type: Single beam
• Wavelength accuracy: ±0.15 nm
• Wavelength resolution: 0.2 nm±0.02 nm
• Wavelength reproducibility: <0.05 nm
• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm
• Baseline stability: 0.005 A/30 min
• Stray light: ≤0.12 %T (220 nm NaI, 340 nm NaNO2)

Graphite Furnace Analysis

• Graphite head: Transversally heated
• Temperature range: Ambient-2650 ℃
• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning
• Feedback : Voltage and optical temperature control feedback
• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs
• Detection limit: Cd<0.004 ng/ml
• Repeatability:
  Cu<2.0 % , Cd<2.0 %
• Graphite tubes: Pyrolytically coated with platform
• Sample size: Up to 20μl
• Graphite cooling: Water circulator available

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

AirClean® Systems AC600 Series vertical laminar flow workstations are ideal for non-hazardous applications that require a clean work area. These compact, lightweight workstations provide positive-pressure, ISO 5 air throughout the chamber and sash opening, thus keeping airborne particulate away from sensitive applications. Given the small footprint and ease of installation (simply plug in the power cord), the AC600 Series vertical laminar flow workstations are an excellent choice for mobile ‘clean zones’ within your facility.

AirClean® Systems AC600 Series PCR Workstations combine ISO 5 HEPA-filtered air with UV light irradiation for the ultimate DNA/RNA manipulation and amplification work area. Cross-contamination during amplification of DNA and RNA can lead to results that are inaccurate, costing the lab technician valuable time and reagents. PCR Workstations minimize this risk by keeping airborne contaminants away from samples and irradiating work surfaces and tools between amplifications.

Features

Features an intuitive 3.75” display with touch-pad control with 4 languages: French, German, Spanish and English. Swivel 180 Rotating Controller and on-board connectivity to USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe. Clearly displayed on-screen prompts and automatic performance optimization and specific heat tuning. Equipped with single-point calibration capability.

Specifications:

• Overall Dimensions (L x W x H) (inches): 21.3 x 8.7 x 24.3 in
• Working Temperature Range °F: -40° to 392°
• Working Temperature Range °C: -40° to 200°
• Nominal Cooling Capacity at +20°C (W): 360
• Reservoir Capacity (gallons): 1.85
• Reservoir Capacity (liters): 7
• Reservoir/Tank Material: Stainless Steel
• Reservoir Cover: Yes
• DuraTop: Yes
• LidDock: Yes
• Cleanable Air Filter: Yes
• Working Access (L x W x D) (inches): 6.18 x 5.59 x 5 in
• Temperature Stability °F: ±0.02°
• Temperature Stability °C: ±0.01°
• Display: 3.75" Touch-Pad LCD
• Display Resolution (Set): 0.01
• Display Resolution (Read): 0.01
• Pump Type: Pressure/Suction
• Pump Speed: Variable
• Process Connections: 1/4" (F) NPT
• External Temperature Control Capability: Yes
• Flammability Class (DIN 12876-1): III (FL)
• Over-Temperature Protection / Failsafe Heater Control: Yes
• Low Liquid Level Protection: Yes
• WhisperCool Environmental Control Technology: Yes
• Cool Command Refrigeration Technology: Yes
• Reservoir Drain: Yes
• Included Software: PolyTemp Viewer, USB driver
• Maximum Ambient Temperature °F: 95°
• Maximum Ambient Temperature °C: 35°
• Refrigerant: R404A
• Environmental Compliance: RoHS, WEEE

Features:

Features an intuitive 3.75” display with touch-pad control with 4 languages: French, German, Spanish and English. Swivel 180 Rotating Controller and on-board connectivity to USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe. Clearly displayed on-screen prompts and automatic performance optimization and specific heat tuning. Equipped with single-point calibration capability.

Specifications:

• Overall Dimensions (L x W x H) (inches): 22.4 x 14.5 x 26.9 in
• Working Temperature Range °F: -40° to 392°
• Working Temperature Range °C: -40° to 200°
• Nominal Cooling Capacity at +20°C (W): 1000
• Reservoir Capacity (gallons): 3.96
• Reservoir Capacity (liters): 15
• Reservoir/Tank Material: Stainless Steel
• Reservoir Cover: Yes
• DuraTop: Yes
• LidDock: Yes
• Cleanable Air Filter: Yes
• Working Access (L x W x D) (inches): 8.35 x 10.88 x 5.5 in
• Temperature Stability °F: ±0.02°
• Temperature Stability °C: ±0.01°
• Display: 3.75" Touch-Pad LCD
• Display Resolution (Set): 0.01
• Display Resolution (Read): 0.01
• Pump Type: Pressure/Suction
• Pump Speed: Variable
• Process Connections: 1/4" (F) NPT
• External Temperature Control Capability: Yes
• Flammability Class (DIN 12876-1): III (FL)
• Over-Temperature Protection / Failsafe Heater Control: Yes
• Low Liquid Level Protection: Yes
• WhisperCool Environmental Control Technology: Yes
• Cool Command Refrigeration Technology: Yes
• Reservoir Drain: Yes
• Included Software: PolyTemp Viewer, USB driver
• Maximum Ambient Temperature °F: 95°
• Maximum Ambient Temperature °C: 35°
• Refrigerant: R404A
• Environmental Compliance: RoHS, WEEE