Used Lab Equipment

Available in 4 differant versions

VOC: Detects and filters volatile   organic compounds

Formaldehyde: For Labs with formaldehyde vapors

Chemplus Acid: For Labs with acid vapors (Detects and filters acids)

Chemplus Solvents: Detects and filters a wide array of pollutants

Features:

• On the job 24/7: Halo is continuously pulling the dirty air in the lab through the filter, adsorbing the molecules that cause noxious odors, and returning clean air back to the room through low-disruptive side vents. The laboratory-grade molecular filtration system contains Neutrodine, a unique and powerful activated carbon mixture combined with a pre-filter that captures a large variety of airborne fumes and odors, which left untreated, could represent a potential health hazard.
• Simple to install: Halo is easily installed in the ceiling - no need to connect to your HVAC. Multiple units can be installed to increase the coverage area.
• Smart technology: A soft band of light assures the occupants of the lab that the air is clean. When the LED lights slowly pulse, Halo is letting you know that it is sensing and capturing fugitive emissions. You can easily check the status, change the setting, or check for routine maintenance via your smartphone.

Benefits:

• Capture the fugitive emissions in your lab, providing a safer laboratory environment – DON’T LET YOU BODY CONTINUE TO BE THE FILTER – Allow Erlab to do the dirty work
• SMART technology provides you with real-time communication to ensure optimal performance 24/7, with continue monitoring of pollution levels in the lab
• Completely independent with NO HVAC required
• Life-time warranty on all technology components

Specifications:

• Processed air flow: 135 CFM - 220 m3/h
• Operating modes: 24/7, Night/Day, Alert
• Detection:
  • Semiconductor sensor:
  • Electro-chemical sensor
  • Electro-chemical sensor
• Fan monitoring: Halo unit monitors the air flow and informs the user through light pulsation communication.
• Pre-filtration: Particulate prefilter
• Chemical Filter:
  • Options Volatile
  • Organic Compounds (VOC)
  • Formaldehyde Acid
• VOCs detection: Semi conductor sensor
• User Interface: Simple communication by LED pulsation system
• eGuard: App for remote control and monitoring
• Ports: 1 Ethernet Port
• Installation: Hung via 4 eye bolts (included) or Threaded Rod (not included)
• Weight: 68 lbs - 31 kg (including filter)
• Voltage / frequency: 80-240V 50/60hz
• Energy consumption: 50 W

Comes with computer loaded w/ Unicorn Software

The purification of biological therapeutics requires processes which usually employ two technologies used in combination: membrane separations and chromatography. Chromatography offers greater selectivity than membrane separations, and can purify much greater quantities of solution in one operation.

However, membrane separations technologies offer a number of other advantages including the fact that they are a fast and robust process step.

ÄKTAcrossflow covers three main filtration techniques:

• Ultrafiltration of proteins
• Diafiltration of proteins
• Microfiltration of cell and lysate solutions

The system supports both hollow fibers and flat sheet cassettes with sizes suitable for flow rates up to 300 ml/min for flat sheet cassettes and up to 600 ml/ min for hollow fibers.

The main application is method development and scale-up in process development laboratories.

Specifications:

• Main Voltage: 100 to 240 V~ ±10%, 50–60Hz (Auto range)
• Weight: 70 kg
• Recirculation Volume Min.: 25 ml (with 1.7 mm i.d. tubing kit)
• Width: 620 mm
• Application: Well-suited for process development, filter screening, and process optimization at small scale.
• Compliance: The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity.
• Flow Cell Path Length: 2 mm
• Connections: UNF 5/16"
• Wavelength [Zn Lamp]: 214 nm
• Hold-Up Volume Recirculation Line: < 20 ml (with 1.7 mm i.d. tubing kit, empty reservoir)
• Length: 400 mm
• Operating Pressure Max.:2 bar (75.4 psi)
• Material Compliance: USP Class V
• Height: 650 mm
• Protection Class: IP 20
• Complete Packsize: 1 Piece
• pH Range: 2 - 12
• Mixing Principle: Magnetic stirrer

New ** Built to order Cleanrooms

Supreme Air 3' Fume Hood

Supreme Air 4' Fume Hood

Supreme Air 6' Fume Hood

Supreme Air 8' Fume Hood

Description:

With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
Built-in PID microprocessor-based controller for close uniformity with set temperatures
Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
Tempered glass inner door to view samples
Temperature recovery is within two minutes
Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
5-amp electrical outlet to support other apparatus

Specifications:

Temperature range: 5 to 75°C
Capacity: 3.8 cu ft, 96.3L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 19 in.
Exterior Dimensions: 26 x 23.5 x 33 in.

Description:

Ideal for protocols that only require ambient temperatures such as staining, some

solubility studies, extraction procedures, and washing procedures.

Features:

• Microprocessor PID control
• Automatic Calibration Function
• Intuitive LCD controller displays time, frequency and temperature
• Easy-set digital timer（1 ~ 5999min）
• Continuous operation guarantee, maintenance-free, easy to clean
• Variety choices of accessories
• Built-in RS-232 port and USB port for external control and data collection (optional)

Safety:

• Built-in power interruption protection function, automatic run after power interruption;
• Over current protection

Specifications:

• Speed Range: 40 ~ 250 rpm
• Frequency: 40 rpm
• Maximum Capacity: 2000ml
• Amplitude: 20mm
• Size of platform(in): 10.0 x 10.0
• Exterior Dimension (W x H x D): 11.4 x 4.3 x 14.8(in)
• Timer: 1 ~ 5999 min
• Power Requirements: AC 100V ~ 240V 50/60Hz

Description:

Ideal for protocols that only require ambient temperatures such as staining, some

solubility studies, extraction procedures, and washing procedures.

Features:

• Microprocessor PID control
• Automatic Calibration Function
• Intuitive LCD controller displays time, frequency and temperature
• Easy-set digital timer（1 ~ 5999min）
• Continuous operation guarantee, maintenance-free, easy to clean
• Variety choices of accessories
• Built-in RS-232 port and USB port for external control and data collection (optional)

Safety:

• Built-in power interruption protection function, automatic run after power interruption;
• Over current protection

Specifications:

• Speed Range: 40 ~ 300 rpm
• Frequency: 40 rpm
• Maximum Capacity: 4000ml
• Amplitude: 20mm
• Size of platform(in): 17.7 x 17.7
• Exterior Dimension (W x H x D): 15.4 x 4.9 x 19.5(in)
• Timer: 1 ~ 5999 min
• Power Requirements: AC 100V ~ 240V 50/60Hz

Description:

Ideal for protocols that only require ambient temperatures such as staining, some

solubility studies, extraction procedures, and washing procedures.

Features:

• Microprocessor PID control
• Automatic Calibration Function
• Intuitive LCD controller displays time, frequency and temperature
• Easy-set digital timer（1 ~ 5999min）
• Continuous operation guarantee, maintenance-free, easy to clean
• Variety choices of accessories
• Built-in RS-232 port and USB port for external control and data collection (optional)

Safety:

• Built-in power interruption protection function, automatic run after power interruption;
• Over current protection

Specifications:

• Speed Range: 40 ~ 300 rpm
• Frequency: 40 rpm
• Maximum Capacity: 9000ml
• Amplitude: 20mm
• Size of platform(in): 17.7 x 17.7
• Exterior Dimension (W x H x D): 19.3 x 5.4 x 23.8(in)
• Timer: 1 ~ 5999 min
• Power Requirements: AC 100V ~ 240V 50/60Hz