Used Lab Equipment

Features:

• Maximum speed of 100,000 rpm (802,006 x g)
• Control Panel is simple with easy key operation and easy to see liquid crystal screen
• The displayed language can be switched over between English and Japanese
• The real time control(RTC) feature enables setting a start time or a finish time, thus letting you run your machine at a desired date and time
• Centrifugal force (RCFmax and RCFavg) can be displayed and set
• Twenty varieties of nine modes can be programmed for a wide range of applications
• Various alarms notify users of causes and necessary actions when fault conditions are detected allowing easier and quicker troubleshooting
• Space saving design. The installation area required is 0.81 m2 (90x90cm) pr 9.0 ft2 (3.0x3.0 ft). Lower top deck makes it easy to install and remove the rotor.
• Low noise level makes the ultracentrifuge suitable for use in any laboratory.
• Samples can be easily balanced visually.
• CFC-free thermoelectric cooling system with greater cooling capacity.

Specifications:

• Maximum speed: 100,000 rpm
• Maximum centrifugal force: 802,006 x g
• Speed control accuracy: ± 10 rpm (1,000 rpm to maximum speed)
• Time for acceleration and deceleration: About 5 minutes from 0 to 100,000 rpm or vice versa
• Rotor temperature control/display accuracy: ±0.50C (set temperature is from 00C to 400C)
• Set speed: 1,000 rpm to maximum speed in increments of 100 rpm
• Vacuum system: Oil rotary vacuum pump and oil diffusion pump combined Ultimate vacuum of 0.13 Pa
• Noise level: 53 dB (measured 1 m in front of the instrument)
• Maximum heat dissipation into room: 1kW/hr
• Cooling method: Thermo-module cooling (CFC-free)
• User interaction means: Liquid crystal display and keyboard
• Interface: RS232C x 1 CH
• Dimensions(WxDxH): 79x69x100cm (31x27x39in). Depth with safety cover mounted: 890mm(35 in). Height to table: 85cm(33.5 in)
• Weight: 400 kg (882 lb.)
• Power requirement: Single phase, 50/60 Hz. 208,220 Vac ± 10%, 20 A maximum (normally 8 A). 230,240 Vac ± 10 %, 16 A maximum (normally 7 A)

Operating temperature: 10 to 350C

Features:

Four preset cycles sterilize wrapped and unwrapped instruments, glassware, and utensils. End-user customization of sterilization cycles makes the Sterilemax adaptable to most other sterilization requirements. The easy-to-read LCD allows quick visualization of sterilization and diagnostic programs, and cycle status. Exclusive only to this product, the chamber door offers three locks for your safety, which prevents the door from opening until the chamber is depressurized. Built-in water pump maintains consistent water supply and accurate steam for every cycle. The largest benchtop sterilizer chamber available in a compact table-top design. Sterilizer chambers are ASME-certified.

Specifications:

• Chamber Capacity (cu ft): 1.2Chamber
• Diameter (in): 12
• Chamber Depth (in): 18
• Min Temperature (° F): 212
• Max Temperature (° F): 275
• Min Temperature (° C): 100
• Reservoir Capacity (Liters): 6
• Max Pressure (PSI): 40
• Width (in): 23
• Height (in): 17
• Depth (in):24.5

• 0.8-6.4x zoom
• F100 objective lens
• 10x eyepiece
• Video port
• Table mount boom stand

Features:

Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specifications:

• Max. Speed: 18000 rpm
• Max. RCF: 23542 xg
• Max. Volume: 4 x 100ml
• Speed range: 200 - 18000 rpm 
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 48 cm
• Weight: 43 kg

Features:

Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specifications:

• Max. Speed: 18000 rpm
• Max. RCF: 23542 xg
• Max. Volume: 4 x 100ml
• Speed range: 200 - 18000 rpm 
• Temperaturvorwahl: -20°C to 40°C 
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 70 cm
• Weight: 60 kg

Features:

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.

Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 21379 xg, making these table top centrifuge Z 366 into a universal high-powered centrifuge.

Specifications: 

• Max. Speed: 15000 rpm
• Max. RCF: 21379 xg
• Max. Volume: 6 x 250ml
• Speed range: 200 - 15000 rpm
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 43 cm x 36 cm x 51 cm
• Weight: 52 kg

Features:

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.

Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 24325 xg, making these table top centrifuge Z 366 K into a universal high-powered centrifuge.

Specifications: 

• Max. Speed: 16000 rpm
• Max. RCF: 24325 xg
• Max. Volume: 6 x 250ml
• Speed range: 200 - 16000 rpm
• Temperature Range: -20°C to 40°C
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 72 cm x 36 cm x 51 cm
• Weight: 77 kg