Used Lab Equipment

Description: The Phoenix Ultra High-purity Lab Water System from Aries FilterWorks delivers Type I, 18.2 Megohm water quality on demand. The water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and internal recirculation to maintain purity. As the water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications. Additional technologies are offered depending on the application, including UV and Ultrafiltration. Multiple sensors continuously monitor the system and final water quality to ensure trouble free operation.

Specifications:

• Dimensions (H x W x D): 21.5 in. x 18.25 in. x 18.25 in.

• Weight: 42 lbs. dry / 47 lbs. operating

• Inlet Connection: 3/8" O.D. Tubing (9.53 mm O.D. Tubing)

• Max Inlet Pressure Range: 20 to 90 psi

• Max. Output Flow: 2.5Lpm

• Inlet Water Temperature Range: 40 - 100 Degrees F

• Power Requirements: 120 VAC/ 60 Hz @ 1.0 amp

• Pressure: 90 PSIG Maximum/ 20 PSIG Minimum

• Temperature (Max.): 100ËšF (30°C)

• Flow Rate (Typical): 0.67 Gallons Per Minute (2.5 Liters Per Minute), < 2.0 LPM with Ultrafilter and Endotoxin filter installed

• Dimensions (H x W x D): 21.6 in. x 14.7 in. x 14.4 in. (54.8cm x 37cm x 36.5cm)

• Weight: 42 lbs. dry / 47 lbs. operating (22.7 kg dry / 25 kg operating)

Specifications:

• Detection type: 1024-element photodiode array
• Light source: Deuterium and tungsten lamps
• Wavelength range: 190 – 950 nm
• Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
• Drift: 2 × 10-3AU/hr at 254 nm
• Linear absorbance Range: 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 – 400 nm
• Slit width: 1, 2, 4 , 8, 16 nm
• Diode width: < 1 nm
• Flow cells
  • Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
  • Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
  • High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
  • 500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
• Control and data Evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

Can be sold as an individual component or as part of a complete stack

Specifications:

• Detection type: 1024-element photodiode array
• Light source: Deuterium and tungsten lamps
• Wavelength range: 190 – 950 nm
• Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
• Drift: 2 × 10-3AU/hr at 254 nm
• Linear absorbance Range: 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 – 400 nm
• Slit width: 1, 2, 4 , 8, 16 nm
• Diode width: < 1 nm
• Flow cells
  • Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
  • Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
  • High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
  • 500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
• Control and data Evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

Can be sold as an individual component or as part of a complete stack

Specifications: 

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Noise: ± 0.75 x 10 -5 AU, at 254 nm
• Drift: 3 x 10-4AU/hr, at 254 nm
• Linearity: >2 AU upper limit
• Wavelength range: 190-600 nm
• Wavelength accuracy: ± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
• Wavelength bandwidth: 6.5 nm typical over whole wavelength range
• Maximum data rate: 55 Hz

DuoSeal Vacuum Pumps are known for their ruggedness world-wide. These rotary vane pumps have large oil reservoirs to dilute contaminants. Low pump rpm to reduces friction and wear while minimizing reservoir temperature to lessen chemical reactivity. Pump can be ordered with an optional exhaust filter to control oil mist.

Specifications:

• Free Air Displacement cfm (l/min.) @60Hz: 5.6(160)
• Ultimate Pressure: 1 x 10-4(0.00013)
• Pump RPM: 525
• Oil Capacity: 2.25(2.1)
• Motor Horsepower (watts): 1/2(370)
• Overall Dimensions LxWxH in. (cm):  20x12x15 (51x30.5x60)

DuoSeal Vacuum Pumps are known for their ruggedness world-wide. These rotary vane pumps have large oil reservoirs to dilute contaminants. Low pump rpm to reduces friction and wear while minimizing reservoir temperature to lessen chemical reactivity. Pump can be ordered with an optional exhaust filter to control oil mist.

Specifications:

• Free Air Displacement cfm (l/min.) @60Hz: 5.6(160)
• Ultimate Pressure: 1 x 10-4(0.00013)
• Pump RPM: 525
• Oil Capacity: 2.25(2.1)
• Motor Horsepower (watts): 1/2(370)
• Overall Dimensions LxWxH in. (cm):  20x12x15 (51x30.5x60)

The 2424 Evaporative Light Scattering (ELS) Detector is a compact detector that controls temperatures in both the nebulization and evaporation stages, maintaining low-dispersion characteristics for dependable HPLC/ELS results. It allows you to obtain more peak information per run and reliability and reproducibility for LC and LC/MS.

Use the detector as part of an Alliance® HPLC or LC/MS system under the direct control of either Empower or MassLynx Software, or as a stand-alone ELS module. This open access-ready detector integrates with the AutoPurification System for flexible, multi-detector purification and isolation solutions.

The 2424 ELS Detector provides solutions for the analysis and purification of a wide variety of compounds that lack UV/Vis chromophores including triglycerides, sugars and natural products.

Specifications:

• Nebulizer: 300 to 3000 µL/min, 1.80 standard liters per minute (Ls/min) at 170 kPa (1.7 bar, 25 psi)
• -High-flow rate (standard with detector)
• Low-flow rate: 50 to 500 µl/min, 0.77 Ls/min at 170 kPa (1.7 bar, 25 psi)
• Gas: 140 kPa (1.4 bar, 20 psi) to 410 kPa (4.1 bar, 60 psi)
• Gain settings : 0 to 1000
• Time constant filter settings: to 5.0 seconds (Hamming)
• Two analog outputs :
• Channel 1 = -0.1 to 2.1 VDC (selectable maximum rates are 10,20,40, or 80 Hz)
• Channel 2 = -0.1 to 2.1 VDC (fixed maximum data rate is 10 Hz)
• Four event input
• Input voltage: +30 Volts max
• Low input voltage: <1.7V
• High input voltage:> 3.2 V
• Two event outputs
• Type: Contact closure
• Voltage:+30 Volts max
• Current, switching: 0.5 A
• Current, carry: 1.2 A
• Temperature control:
• Nebulizer heater power: 0 to 100%
• Nebulizer cooler: Cooling/Off
• Drift tube heater: Ambient to 100°C (212 °F)
• Operating temperature: 4 to 30°C (39.2 to 86°F)
• Operating humidity: 20 to 95%, noncondensing
• Shipping and storage temperature: -30 to 60°C (-22 to 140°F)
• Shipping and storage humidity: 0 to 95%, noncondensing
• Acoustic noise (instrument generated): <65 dBA

Specifications:             

• Capacity: 6.5 cu. ft. (184L)
• CO2 Concentration Range: 0 to 20%
• O2 Range: 1 to 20%
• Relative Humidity: Ambient to 95% at 37°C
• Humidity System: 3L stainless-steel pan
• Temperature Range: Ambient +5°C to 55°C
• Temperature Uniformity: ±0.2°C at 37°C
• Chamber: Polished stainless-steel interior with coved corners
• Interior D x W x H: 0 x 21.3 x 26.8 in. (50.8 x 54.1 x 68.1cm)
• Shelving: Stainless steel
• Exterior L x W x H: 25 x 26.0 x 39.5 in. (63.5 x 66.0 x 110.3cm)
• Port(s): Chamber thru-wall access port with filter; RS-485 interface (optional)
• Net Weight: 265 lb. (120.2kg)
• Shipping Weight: 324 lb. (147kg)

Specifications:

• Disinfection Time: 14 hours total cycle, 140°C

• CO2 Concentration Range: 0 to 20%

• CO2 Sensor Technology: IR

• Humidity Delivery: external reservoir

• Relative Humidity: Ambient to 95%, controlled

• Temperature Range: 5° to 50°C

• Capacity: 11.4 cu.ft., 322.8L

• Height Interior: 32.8 in.

• Depth Interior: 20.6 in.

• Width Interior: 28.8 in.

• Net Weight: 410 lb.

• Shelves: 5/22 [Supplied/Max.]

• Voltage: 115V

• Amperage: 11.5A

• Cabinet Material: 18-gauge, cold-rolled steel

• CO2 Concentration Control: ±0.1% at 5%

• Hertz: 50/60Hz

• Ports: Chamber thru-wall access port with filter

• Shelf Material: Perforated stainless steel

• Dimensions (D x W x H) Interior: 20.6 x 28.8 x 32.8 in.

Steri-Cycle CO2 Incubators are designed, manufactured, and tested to provide two highly effective methods of contamination control. In addition to the 24 hour/day functioning of the patented HEPA (High Efficiency Particulate Air) Filter Airflow System, which provides Class 100 chamber air within 5 minutes, you now have the capability of periodically running a heat sterilization cycle that destroys all microbial life forms.

Thermo Forma's CO2 incubators also provide an unequaled combination of performance, convenience, and reliability. . Specially designed wrap-around heaters surround all sides of the chamber walls, combining with the directed airflow to provide extremely uniform chamber temperature. Units are also easy to setup and program, with an alphanumeric message center and constant temperature and CO2 displays

Specifications:

• Temperature Range: +5C above ambient to +50C
• Temperature Uniformity: +/-0.3C @ 37C
• Humidity System: 3.2 quart (3.0 liter) pan
• Humidity Range: Ambient to 95% @ 37C
• Interior Volume: 6.5 cu.ft. (184.1 liters)
• Interior W X H X F-B: 21.3 X 26.8 X 20.0 in

Steri-Cycle CO2 Incubators are designed, manufactured, and tested to provide two highly effective methods of contamination control. In addition to the 24 hour/day functioning of the patented HEPA (High Efficiency Particulate Air) Filter Airflow System, which provides Class 100 chamber air within 5 minutes, you now have the capability of periodically running a heat sterilization cycle that destroys all microbial life forms.

Thermo Forma's CO2 incubators also provide an unequaled combination of performance, convenience, and reliability. . Specially designed wrap-around heaters surround all sides of the chamber walls, combining with the directed airflow to provide extremely uniform chamber temperature. Units are also easy to setup and program, with an alphanumeric message center and constant temperature and CO2 displays

Specifications:

• Temperature Range: +5C above ambient to +50C
• Temperature Uniformity: +/-0.3C @ 37C
• Humidity System: 3.2 quart (3.0 liter) pan
• Humidity Range: Ambient to 95% @ 37C
• Interior Volume: 6.5 cu.ft. (184.1 liters)
• Interior W X H X F-B: 21.3 X 26.8 X 20.0 in

2 ft Purifier Vertical Clean Bench

Specifications:

• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Disposable prefilter
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions
• Two utility ports with iris openings and plugs
• ETL Listing (115 volt, 60 Hz models)
• One year warranty on parts and service

Specifications:

• Deep 23" interior to accommodate large micro and analytical balances
• Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
  Upper dilution air supply
  • Upper containment sash foil
  • Zone-perforated rear baffle
  • Side-entry air foils
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size
• True bag-in/bag-out filter disposal system
• Built-in blower with dynamically-balanced, vibration-isolated motorized impeller
• Intrinsically-safe, negative pressure design
• Minihelic pressure gauge
• Space-saving design. No separate filtered exhauster is required.
• Upper diffuser screen
• Quiet operation from 48-66 db(A) depending on airflow
• Glacier white and gray, dry powder epoxy-coated aluminum frame and steel rear plenum and baffle. No unreliable plastic-to-plastic bonding is used.
• Pre-wired fluorescent lamp and switches for blower and light
• Speed control
• 1/4" thick tempered safety glass front sash and sides
• 4" or 12.0" high sash opening
• Ergonomic 10 degree angled and hinged sash that pivots upward, locks for loading and has a wiping seal to contain contaminants
• Two utility ports
• Particulate containment independently verified by SafeBridge Consultants, Inc.

Description:

Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Because they do not provide protection to the user, they should not be used in conjunction with biohazardous material, toxins or radionuclides.

Specifications:

• Weight: 125.0 lbs (57.0 kg)
• Dimensions (W x D x H): 24" x 28.6" x 36.8"
• Electrical: 115 volts, 60 Hz, 5 A
• Laminar Flow: Vertical
• Nominal Width: 2'
• Conformance: CAN/CSA C22.2, UL, UL Standard 3101-1/61010-1
• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions

Transilluminators provide brilliant back illumination of transparent materials that are placed on the filter area. It is designed with a durable Plexiglass and glass filter combination and provides increased UV sensitivity and uniformity, while reducing electrical consumption. The transilluminators provide a highly sensitive method to detect double-stranded nucleic acids that have been labeled with fluorescent dyes such as ethidium bromide or acridine orange.

Specifications:

• Filter Dimensions: 21 x 26 cm (8 1/4 x 10 1/4")