Used Lab Equipment

Features:

• Optimized for high-throughput applications and sub two micron column particles
• Maximum reproducibility with isothermal injection and separation
• Greater application flexibility with multiple sample formats
• Superior robustness with a diamond coated high pressure valve Accela Photo Diode Array Detector
• Highest detection sensitivity with proprietary LightPipe technology
• Designed for U-HPLC separations with a 1cm path length, 2µL LightPipe flowcell
• Maximum peak resolution with fiberoptic beam shaper
• Easy maintenance with integrated wavelength validation

Specifications:

• Sample capacity:
  • 200 vials in five removable trays
  • 288 samples in three 96-well microplates
  • 1152 samples in three 384-well microplates
• Standard vial:8 mL volume
• Injection precision: < 1.0% RSD at 5 μL and up
• Partial loop injection volume:
  • 10 μL with standard 25 μL sample loop and 250 μL syringe
  • Up to 1000 μL injection volume with optional loops and syringes
• Fixed loop (full loop) injection volume:
  • 25 μL with standard loop and 250 μL syringe
  • Up to 1000 μL injection volume with optional loops and syringes
• Sample carryover:
  • < 0.1%
  • 6 mL flush volumes, user-specified for internal and external needle wash cycles
• Minimum sample volume: 1 μL can be injected from 5 μL
• Needle height control:
  • Programmable in 0.1 mm increments
  • Active vial bottom search selectable on/off
• Column oven: Programmable in 1 °C increments from 5 to 95 °C
• Tray temperature control:
  • Programmable in 1 °C increments from 0 to 60 °C
  • Typical vial temperature from 4 to 50 °C
• Reagent vials: Four 16 mL vials can be specified for flush/wash or dilution functions
• Remote inputs: Pump ready, inject hold
• Remote outputs: Pump stop, autosampler ready, inject, gradient start, four timed events
• Ambient environment:10 to 40 °C, 5 to 95% relative humidity, non-condensing
• Power requirements: 100/120/220/240 Vac nominal; 50/60 Hz, 550 VA

Specifications:

• Injection range: From 0.1 – 100 µl in 0.1 µl increments
• Replicate injections: From 1 – 99 from one vial
• Injection cycle time: Typically 50 s, depending on draw speed and volume
• Sample capacity: 100 × 2 ml vials in tray

Specifications:

• Autosampler (Chiller Compatible)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range: 1– 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)
• Replicate injections: 1– 99 from one vial
• Precision:
  • Typically < 0.5 % RSD of peak areas from 5 – 100 µl
  • Typically < 1 % RSD of peak areas from 1 – 5 µl
• Minimum sample volume: 1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial
• Carryover: Typically < 0.1 %, < 0.05 % with external needle cleaning
• Sample viscosity range: 2 – 50 cp
• Replicate injections per vial: 1 – 99
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 40 × 2-ml vials in ½ tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s depending on draw speed and injection volume

Can be sold as an individual component or as part of a complete stack

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

Specifications:

• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Communications Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  
  • – 8 µl in 0.01 µl increments with the small loop capillary
  • – 40 µl in 0.01 µl increments with the extended loop capillary
• Precision:
  • Typically < 0.5 % RSD of peak areas from 5 – 40 µl,
  • Typically < 1 % RSD from 1 – 5 µl
  • Typically < 3 % RSD from 0.2 – 1 µl
• Sample viscosity range: 2 – 5 cp
• Sample capacity:
  • 2× well-plates (MTP) + 10 × 2 ml vials
  • 100 x 2 ml in one tray
  • 40 x 2 ml in half tray
• Injection cycle time:
  • Typically, < 30 s using following standard conditions:
  • Default draw speed: 4 µl/min
  • Default eject speed: 10 µl/min
  • Injection volume: 0.1 µl
• Carry-over:
  • Typically < 0.05 % using the following conditions:
  • Column: 150 x 0.5 mm Hypersil ODS, 3 µm
  • Mobile phase: Water/Acetonitrile = 85/15
  • Column Flow rate: 13 µl/min
  • Injection volume: 1 µl caffeine (=25ng caffeine), 1 µl water to test carryover
  • Outside wash of needle before injection: 20 sec with water using flush port

Specifications:

• Sample capacity: 100 x 2 ml vials in 1 tray. Microvials (100 or 300 µl) with sleeves (reduced cooling performance with microvials)
• Settable injection volume
  • to 8 µl with small loop capillary
  • to 40 µl with extended loop capillary
• Precision
  • Typically < 0.5 % RSD from 5 to 40 µl
  • Typically < 1 % RSD from 1 to 5 µl
  • Typically < 3 % RSD from 0.2 to 1 µl
• Minimum sample volume: µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvials
• Carryover
  • Typically < 0.1 % without automated needle wash
  • Typically < 0.05 % with external needle cleaning and 1 µl injection volume
• Sample viscosity range: 2 - 5 cp
• Recommended pH-range: - 8.5 solvent with pH < 2.3 should not contain acids which attack stainless steel. Upper pH range is limited by fused silica capillaries
• Material in contact with solvent: Stainless steel, sapphire, PTFE, PEEK, fused silica
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in aintenance areas, error detection and display
• Housing: All material recyclable

Can be sold as an individual component or as part of a complete stack

Specifications:

• Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  • 900 µl in 0.1 µl increments (recommended 1 µl increments)
  • Up to 1800 µl with multiple draw (hardware modification required)
  • Up to 5000 µl with multiple draw (hardware modification required)
• Replicate injections: – 99 from one vial
• Precision:
  • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
  • Typically < 1% RSD of peak areas from 2000 – 5000 µl
  • Typically < 3% RSD of peak areas from 1 – 5 µl
• Minimum sample volume:
  • µl from 5 µl sample in 100 µl microvial
  • 1 µl from 10 µl sample in 300 µl microvial
• Sample viscosity range: 0.2 – 50 cp
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s, depending on draw speed and injection volume

The Agilent 1200 ALS Thermostat, G1330A controls temperature for either HPLCs or fraction collectors. The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting.

Specifications:

• Weight: 20.7 kg (45.6 lbs)
• Dimensions: 140 × 345 × 435 mm (5.5 × 13.5 × 17 inches)
• Line Voltage: 100 – 120 or 220 – 240 VAC, ± 10 % Automatic selection
• Line Frequency: 50 or 60 Hz, ± 5 %
• Power consumption Autosampler: 300 VA 
• ALS Thermostat: 260 VA

Specifications:

• Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  • 900 µl in 0.1 µl increments (recommended 1 µl increments)
  • Up to 1800 µl with multiple draw (hardware modification required)
  • Up to 5000 µl with multiple draw (hardware modification required)
• Replicate injections: – 99 from one vial
• Precision:
  • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
  • Typically < 1% RSD of peak areas from 2000 – 5000 µl
  • Typically < 3% RSD of peak areas from 1 – 5 µl
• Minimum sample volume:
  • µl from 5 µl sample in 100 µl microvial
  • 1 µl from 10 µl sample in 300 µl microvial
• Sample viscosity range: 0.2 – 50 cp
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s, depending on draw speed and injection volume

The 2707 Autosampler is a versatile, compact sample management system that makes highly precise and reproducible injections of samples into your LC or LC/MS system. It is ideally suited for laboratories where reduced carryover, maximized repeatability, high accuracy, and application flexibility are of concern.

Features:

• Compact design yet easily serviceable
• High-resolution syringe control for high-precision injections
• Interchangeable fixed-volume sample loops
• Variable-volume partial-loop injection capability
• Optional sample cooling for consistent results
• Pressure-assisted sample aspiration injection capability
• Use of plates or vials, alone or in combination, for varied sampling formats
• Empower Software control

Specifications:

• Audible noise level: <65 dBA
• Working temperature: 10 to 40 °C (indoor use only)
• Storage temperature: -25 to +60 °C
• Humidity: 20% to 80% RH
• Installation class: II
• Pollution degree: 2
• Altitude: Up to 2000 m
• Power requirements: 95 to 240 VAC ±10%; 50 to 60 Hz; 200VA
• Viscosity range: 1 to 5.0 cP
• Back pressure (maximum): 5000 psi (345 bar)
• Sample capacity: 2 microtiter plates according to SBS standards; 96-well high/low and 384-well low formats, 48-vial or 12-vial trays; any combination of plates is allowed
• Vial/plate dimensions (includes cap): Maximum vial/plate height: 4.7 cm (1.9 in.) (includes septa or cap mat)
• Loop volumes: 5, 10, 20, 100 (standard), and 500 μL; 10 mL loop (standard) for prep option
• Dispenser syringe: 500 μL standard or 2500 μL μL (standard for prep option)
• Vial detection: Missing vial/well plate detection by sensor
• Headspace pressure: Built-in compressor, only used for vials with septa
• Switching time injection valve: Electrically <100 msec
• Wash solvent: Integrated wash solvent bottle
• Wetted parts in flow path: SS316, PTFE, TEFZEL, PEEK, Glass
• Injection cycle time: <60 s for one injection, ≤100 μL including 300 μL wash

Configuration:

• Holds Up to 24 Tubes/Vials for 2700 System
• Sample Container Diameter: 10-16 mm
• Sample Container Height: 20 to 100 mm

Includes:

• Agilent 6890 Plus Gas Chromatograph
• 7683 100 Vial Autosampler with Injector Tower

• Agilent 5973
• Edwards RV3 Vacuum Pump
• Computer Loaded with Chemstation Software
• Monitor

Specifications:

Mass Spectrometer:  

• Mode (standard): EI
• Modes (optional): PCI, NCI EI with CI source
• Ion source type: 5 - 241.5 eV
• Ionization energy: 0 - 315 uA
• Ionization current: 100 - 350 'C
• Transfer line temperature: 150 - 300 'C
• Quadrupole temperature: 150 - 200 'C
• Mass filter: Monolithic hyperbolic quadrupole
• Mass filter protection: Entrance lens
• Mass range:6 - 800 amu
• Mass resolution: Unit mass adjustable by tune
• Mass axis stability: Better than 0.10 amu/ 48 h
• Detector: EM with replacement horn
• Dynamic range (electronic): 10e6
• Scan rate (electronic): 10,000 amu/s
• Write-to-disk: 8,000 amu/s
• SIM: 30 ions x 50 groups
• Pumping system: Turbomolecular pump
• Total flow: 2 mL/min (standard turbo)

Gas Chromatograph: 

• Automatic injector (optional): Automatic alignment, fast injection
• Liner replacement: Compatible with optional flip-top inlet sealing system
• Injector: Split-splitless (standard), others available
• Oven temperature: Ambient +4 - 450 'C
• Oven ramps / plateaus: 6-7
• Carrier gases: Helium, hydrogen, nitrogen, argon
• Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
• Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
• Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
• Retention-time locking:RTL ready
• Flow control: Compatible with optional microfluidics controller

Features:

• Loop volume 5-1000µl
• 96 vials 1.5 ml vial capacity
• A-900 autosampler designed for use with AKTA
• Syringes 100 - 1000 µl
• Built-in compressor

Features:

• A-905 is an automated sampling injector for use with AKTA systems
• Sample capacity: 96-well and 384-well microplates
• Maximum total plate height: 47 mm
• Dispenser syringe: 250 - 1000 µL
• Loop volume: 5 - 1000 µL
• Built-in compressor