Used Lab Equipment

Description:

• Extra-large
• Chemical-resistant
• Cross-linked polyethylene bowl
• Cast-iron base with nonskid feet for stability

Specifications:

• Maximum Speed: 5100 rpm
• Weight: 50 lbs
• Dimensions (H x L x W): 14” x 20” x 16”

Description:

The Eppendorf 5414 fixed-speed microcentrifuge is a compact, quiet-running centrifuge which reaches maximum speed of 15,000rpm and RCF 15,600xG in 10 seconds and stops in 15 seconds, regardless of load. The centrifuge's total spin time is controlled by a built-in 30 minute timer which automatically shuts off automatically after desired spin-time is over. The 5414 features pushbutton momentary switch which permits operation for short spin times and LED pilot light cycles on and off at 1 second intervals for counting. The Eppendorf also features a safety switch which prevents starting the centrifuge with lid open and safety lock which prevents opening of lid while centrifuge is in operation.

Specifications:

• Dimensions (W x D x H): 8.25 x 10.5 x 11.25"
• Maximum Speed: 15,000 RPM

Features:

• Capacity: 30 x 1.5/2.0 mL capacity rotor
• Speed up: to 25,000 x g (16,400 rpm)
• Compact footprint for use on all lab benches
• Low profile design for ergonomic loading/unloading of rotor—allows for complete lid opening under low-hanging shelves
• Low noise level to benefit your work environment
• Backlit, full-digit display for easy reading
• Automatic rotor recognition and imbalance detection for maximum safety
• FastTemp function for fastest pre-cooling and maximum temperature accuracy
• Standby cooling maintains temperature when centrifuge is not in use
• Braking time from max speed: ≤12 s (in FA-45-30-11)
• Acceleration/Brake speed settings: 2
• Timer: 30 s to 99 min, with cont. mode
• Noise level: <54 dB(A)
• Dimensions (W x D x H): 12.2 x 23.6 x 9.5 in / 31 x 60 x 25 cm
• Height with lid open: 21.1 in / 53.5 cm
• Weight: 77 lb / 35 kg

The Centrifuge 5427 R was designed with high-throughput research applications in mind. With its aerosol-tight 48-place rotor it handles even the toughest challenges in a safe and reliable manner to provide you the efficiency boost you need. All aerosol-tight rotors, including the new rotors for Eppendorf Tubes. Our aerosol-tight Eppendorf QuickLock rotors close with only 1/4 of a turn. This not only saves you time during every day use, it also takes repetitive stress off your wrist.

Specifications:

• Maximum RCF: 25000 xg
• Maximum Speed: 16,220 rpm
• Maximum Capacity: 48 x 1.5/2.0 mL
• Rotors Available: 9
• Acceleration Time: 18 s
• Deceleration Time: 18 s
• Timer: 10 s to 9:59 hours
• Noise Level: < 46 dBA
• Power Supply: 230V, 50/60 Hz
• Maximum Power Consumption: 550W
• Dimensions: 54 x 31.9 x 25.4 cm
• Weight Without Accessories: 30 kg
• Temperature Control Range: -11 °C to 40 °C

Features:

The 5702 family of low speed, general purpose centrifuges was especially designed to meet the requirement of low- to mid-throughput clinical research and cell culture labs. They are compact in design so that one can fit comfortably on every lab bench, quiet in operation to benefit your work environment.

Specifications:

• Max. speed: 3,000 × g (4,400 rpm)
• Very compact footprint to fit on every lab bench
• Very quiet operation to benefit your environment
• Low access height for simple loading and unloading of samples
• SOFT brake function for slow acceleration and braking. Optimized for cell separation by gradient centrifugation
• “At set RPM” function starts the timer when the selected rotational speed is reached for reproducible centrifugation runs
• Key lock to prevent unintentional adjustments
• Stainless steel rotor chamber is rust-free and easy to clean
• Electronic imbalance detection for maximum safety

Features:

The Centrifuge 5702 is a compact general purpose, low speed centrifuge. It is ideal for low- to mid-throughput clinical research and cell culture labs. This centrifuge also provides 6 rotor options to accommodate different tubes.

Specifications:

• Dimensions (W x D x H): (32 x 40 x 24 cm)
• Height (with open lid): 53 cm
• Max. RCF: 3,000 x g
• Max. speed: 4,400 rpm
• Speed: 100 - 4,400 rpm (100 rpm steps)
• Max. capacity: 4 x 100 mL
• Rotors available: 6
• Acceleration time: 25 s
• Deceleration time: 25 s
• Timer: 0 - 99 min, with continuous run function
• SOFT brake function: yes
• Noise level: < 52 dB(A) with Rotor A-4-38
• Power supply: 120V, 60 Hz
• Max. power consumption: 200 W
• Cooling: non-refrigerated

Features:

The refrigerated/heated Centrifuge 5702 RH is a compact general purpose, low speed centrifuge. It is ideal for low- to mid-throughput clinical research and cell culture labs. This centrifuge also provides 6 rotor options to accommodate different tubes.This centrifuge also features a FastTemp function which allows for fast pre-cooling. It also allows centrifugation under biological conditions to improve cell viability for more accurate results in downstream applications like cell cultivation. Active heating guarantees high temperature accuracy during the entire centrifugation cycle.

Specifications:

• Dimensions (W x D x H): (38 x 58 x 26 cm)
• Height (with open lid): 60 cm
• Temperature control range: -9 °C to 40 °C
• Max. RCF: 3,000 x g
• Max. speed: 4,400 rpm
• Speed: 100 - 4,400 rpm (100 rpm steps)
• Max. capacity: 4 x 100 mL
• Rotors available: 6
• Acceleration time: 25 s
• Deceleration time: 25 s
• Timer: 0 - 99 min, with continuous run function
• SOFT brake function: yes
• Noise level: <46 dB(A) with Rotor A-4-38
• Power supply: 120 V, 50 - 60 Hz
• Max. power consumption: 380 W
• Cooling: refrigerated

Eppendorf Centrifuge 5804/5804 R with its renowned quality and reliability offers you the most cost efficient solution for your medium throughput applications–now and in the future. It allows for molecular applications in tubes up to 250 mL and offers additional swing-bucket and fixed-angle rotors as well as deepwell plate capacity for increased versatility.

Features

• Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 250 mL
• Fixed-angle rotors for high-speed molecular biology applications in tubes from 0.2 mL to 85 mL
• High centrifugation speed of up to 20,913 × g (14,000 rpm)
• Centrifuge lid with soft-touch lid closure
• Low access height of 29 cm for easy loading and unloading of samples
• Quiet operation to improve your work environment
• Compact footprint saves valuable bench space
• Automatic rotor recognition and imbalance detection for maximum operational safety

Specifications:

• RCF: 20,913 x g
• RCF with fixed-angle rotor: 20,913 x g
• RCF with swing-bucket rotor: 4,500 x g
• RCF with plate rotor: 2,250 x g
• Speed: 200 – 14,000 rpm (10 rpm steps)
• capacity: 4 x 250 mL/2 x 5 MTP 
• Rotors available: 12
• Acceleration/braking ramps: 10/10
• Number of programs: 35 user-defined programs
• Timer: 1 min to 99 min, with continuous run function, short-spin
• Noise level: < 62 dB(A)
• Power supply: 120 V, 50 – 60 Hz
• power consumption: 900 W     
• Dimensions (W × D × H): 47â€¯× 55â€¯× 34 cm     
• Height (with open lid): 74 cm           
• Weight w/o accessories: 55 kg         
• Cooling: non-refrigerated

A-4-44 Rotor

• Swing-bucket holds 4 deepwell plates
• Commercial nucleic acid purification kits up to a maximum height of 89 mm can be used
• Different combinations of stacked plates can be centrifuged
• Simultaneous processing of up to 192 samples
• Maximum rotational speed: 3,700 rpm (max. rcf: 2,250 x g)
• Rotor and buckets are autoclavable (121°C, 20 min)

Eppendorf Centrifuge 5804/5804 R with its renowned quality and reliability offers you the most cost efficient solution for your medium throughput applications–now and in the future. It allows for molecular applications in tubes up to 250 mL and offers additional swing-bucket and fixed-angle rotors as well as deepwell plate capacity for increased versatility.

Features

• Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 250 mL
• Fixed-angle rotors for high-speed molecular biology applications in tubes from 0.2 mL to 85 mL
• High centrifugation speed of up to 20,913 × g (14,000 rpm)
• Centrifuge lid with soft-touch lid closure
• Low access height of 29 cm for easy loading and unloading of samples
• Quiet operation to improve your work environment
• Compact footprint saves valuable bench space
• Automatic rotor recognition and imbalance detection for maximum operational safety

Specifications:

• RCF: 20,913 x g
• RCF with fixed-angle rotor: 20,913 x g
• RCF with swing-bucket rotor: 4,500 x g
• RCF with plate rotor: 2,250 x g
• Speed: 200 – 14,000 rpm (10 rpm steps)
• capacity: 4 x 250 mL/2 x 5 MTP 
• Rotors available: 12
• Acceleration/braking ramps: 10/10
• Number of programs: 35 user-defined programs
• Timer: 1 min to 99 min, with continuous run function, short-spin
• Noise level: < 62 dB(A)
• Power supply: 120 V, 50 – 60 Hz
• power consumption: 900 W     
• Dimensions (W × D × H): 47â€¯× 55â€¯× 34 cm     
• Height (with open lid): 74 cm           
• Weight w/o accessories: 55 kg         
• Cooling: non-refrigerated

A-4-44 Rotor

• Swing-bucket holds 4 deepwell plates
• Commercial nucleic acid purification kits up to a maximum height of 89 mm can be used
• Different combinations of stacked plates can be centrifuged
• Simultaneous processing of up to 192 samples
• Maximum rotational speed: 3,700 rpm (max. rcf: 2,250 x g)
• Rotor and buckets are autoclavable (121°C, 20 min)

Operating Features

• A-4-62 (4x250ml) including buckets for Models 5810
• With rectangular buckets max. rotational speed: 4,000 rpm (max. rcf: 3,200 x g)
• Touch-keypad control and digital display for speed/RCF, run time, program number and temperature (5810R only)
• With 34-program memory
• Run modes: Timed (up to 99 minutes in 1-minute increments) or continuous run
• Choice of 10 acceleration/braking profiles
• Accept tubes and bottles from 0.2 to 400mL (with accessory adapters, sold separately)

Safety Features

• Low-profile design for convenient access to rotor chamber
• Motorized lid lock
• Automatic rotor recognition and unbalanced load sensor with alert
• Low-noise (<60dB), maintenance-free motor

Features:

The Centrifuge 5810 is ideal for medium to high throughput applications. Its compact footprint design combines both versatility and capacity for tubes and plates. With its new rotor generation the capacity reaches a maximum 4 x 750 mL ( or max. 28 x 50 mL/56 x 15 mL).

Specifications:

• Dimensions (W x D x H): (54 x 61 x 35 cm)
• Footprint (dimensions w/o front panel, WxD): 54 x 54 cm
• Height (with open lid): 80 cm
• Max. RCF: 20,913 x g
• Max. RCF with fixed-angle rotor: 20,913 x g
• Max. RCF with swing-bucket rotor: 4,500 x g
• Max. RCF with plate rotor: 3,486 x g
• Speed:  200 14,000 rpm (10 rpm steps)
• Max. capacity: 4 x 750 mL/4 x 4 MTP
• Rotors available: 18
• Acceleration/braking ramps: 10/10
• Number of programs: 35 user-defined programs
• Timer: 1 min to 99 min, with continuous run function, short-spin
• Noise level: <70 dB(A)
• Power supply: 120 V, 50 - 60 Hz
• Max. power consumption: 900 W
• Cooling: non-refrigerated

The Fisher AccuSpin 1 is a powerful mid range benchtop centrifuge used for a wide range biotech, pharmaceutical, R&D and industrial applications.  The centrifuge comes with microprocessor controls situated in the front of the instrument used for easy access.  The Fisher Scientific AccuSpin Centrifuge 1 comes with preset programs for acceleration and deceleration along with a built-in memory bank to retain the last settings used. This benchtop centrifuge also automatically recognizes the rotor being used for proper speeds, has load imbalance detection, and an maintenance free, whisper quiet motor.

Specifications:

• Maximum Capacity: 4 x 150mL
• Maximum Speed:6000 rpm
• Maximum RCF:6240 xg
• Power Requirements:115V, 50/60Hz
• Dimensions:21 x 18 x 16 in
• Weight:121 lbs

With a hefty 3 liter capacity and the ability to accommodate a wide variety of sample tubes and bottles, Accuspin 3R offers versatility for your lab’s changing needs. It is loaded with advanced features for safe, simple operation and is designed with a low profile that makes loading, unloading or changing rotors convenient and easy..

Specifications:

• Speed Range: 300 - 15000 rpm
• Maximum RCF:21890 xg
• Dimensions:25 x 28.75 x 14.25 in (67 x 73 x 36 cm)
• Working Height: 5 in (32 cm)
• Weight: 288 lb (131kg)
• Run Time: 0 - 9 hours
• Temperature Range: -9°C to 40°C

The Beckman Coulter Allegra 21R is a compact refrigerated benchtop centrifuge. It is great for pelleting, nucleic acid precipitation, and protein extraction.

Specifications:

• Maximum Capacity: 4 x 180 mL
• Maximum RCF: 21460 xg
• Maximum Speed: 15300 rpm
• Temperature Setting: -20° to 40°C
• Dimensions: 25.2 x 16.6 x 15 in (D x W x H)
• Power Requirements: 120V, 15A, 60Hz
• Weight: 154.4 lbs 
• Run Time: 9 hours, 59 minutes