Used Lab Equipment

Features:

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks.

Specifications:

• Dimensions: 35.5 x 21.3 x 30.3” (W x D x H)
• Internal capacity: Approximately 4.9 cu.ft
• Temperature control ranges: 5°C above ambient to 50°C
• Environmental conditions(operating): Indoor Use, Pollution Degree- 2, 4° to 50° C, Relative Humidity 0-90% Non-Condensing
• Environmental Conditions (non-operating): -10° to 60° C, Relative Humidity 95% max

• • Features:

    The Bellco Digital Bench-top Roller Apparatus holds 10 glass or plastic roller bottles (110 to 120 mm diameter and up to 22.5 cm in length). The unit features a heavy-duty DC motor and solid-state electronics that operate at bottle speeds ranging from 0.3 to 10.0 rpm with the ability to select clockwise or counter clockwise direction. The digital display panel has a 0.55” LED for easy reading and the apparatus has a locking speed knob.  Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. Bellco’s unique hex-shaped shafts prevent roller slippage for positive drive. Use of this equipment is limited to conventional laboratory mixing of roller bottles.

    Specifications:

    • Bottle positions: 10 positions (2 Decks @ 5 Positions)
    • Speed range: 0.3 - 10rpm ( default factory preset) +/- 2%
    • Usable roller length: 22.5 cm
    • Roller composition: Non-Transferring chemically resistant rubber
    • Frame composition: Aluminum
    • Environmental Conditions (Operating): Indoor Use, Pollution Degree 2, 4° To 50° C, Relative Humidity 0-90%, Non-Condensing
    • Environmental Conditions (Non-Operating): -10° To 60° C, Relative Humidity 95% Maximum

     

   

Specifications:

• Incubator Cell Roll System
• 15 position
• Three tier cell roller
• 30.5" w x 24.5" d

Features:

Dual IR stacked water-jacketed CO2 incubator. Microprocessor control maintains and displays temperature and CO2 levels with exceptional precision, stability & uniformity. Patented recovery system with internal air heater and fan restores set-point conditions up to 3 times faster than conventional water-jacketed CO2 incubators. Insulated triple-wall construction and low-power heater in the outer doors keep thermal loss to a minimum while minimizing condensation on the inner glass doors. User friendly features include front panel calibration and diagnostics, software lock to prevent inadvertent changes to set-points, audio/visual deviation alarms, low-water indicator and over-temperature safety switch.

Specifications:

• Dual Chamber
• Catalog Number: TC Sensor 51200065 
• Chamber Volume:10.8 cu.ft/307.0 liters 
• Chamber Dimensions (L x W x H): 17.3 x 17.5 x 25 in. 
• Exterior Dimensions (L x W x H): 27.8 x 24.5 x 67.2 in
• CO2 Range:
  • Control Stability Uniformity:0 to 20.0%, 0.1%, ±0.1%, ±0.25%, 0 – 20.0%

Description:

Boekel Scientific offers a wide variety of Dry Bath Incubators designed to accommodate an assortment of interchangeable Heating Block Modules. These reliable and economical products are ideal for a variety of applications including restriction digests, C.O.D. denaturing DNA, BUN, melting agar, coagulation studies, in situ hybridization and Hot Start PCR.

Specification:

• Temperature Range: +5ºC to 120ºC
• Stability: ±0.2°C @ 37°C

The Fisher Scientific Dry Bath Incubators offer exceptional temperature control and uniformity in addition to a powder coated steel body to provide durability for demanding applications.

Specifications:

• Temperature Range: 5 - 130 °C
• Temperature Stability: +/-1.5 °C
• Temperature Uniformity: +/-0.5 °C
• Power Requirements: 120V, 50/60Hz

Compact, flexible high precision tube and plate heating system with heated lid. System consists of a heating base with a variety of interchangeable, removable blocks for widely used tubes and plates. A waterbath insert (625 ml) is also available for heating buffers for washing microarrays or other applications.

Specifications:

• Dimensions: 12 x 6 x 10 in
• Weight: 6 lbs
• Temperature Range: Ambient +5 to 99C
• Temperature Regulation: +/- 0.1C

Provides uniform heat distribution and reduces air movement helping to prevent cross contamination of samples. Ideal for applications where forced air cannot be tolerated.

Specifications:

• Temperature range: 5℃ above ambient to 65℃
• Dimensions: D x H x W (15 x 21.0 x 15.7in)
• Chamber size: 1.3 cu. ft. (37 L)

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Design Features

Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

Specifications:

• Speed Range:200 rpm – 15,000 rpm

• Maximum Relative Centrifuge Force (x g):21,379 g

• Maximum Capacity (Rotor):6x250 ml

• Acceleration Gear:10

• Deceleration Gear:10

• Dimensions (HxLxW):13.94 in x 21.18 in x 17.56 in (354 mm x 538 mm x 446 mm)

• Display: LCD with backlight

• Net Weight：115 lb (52 kg)

• Noise Level:≤61±2 dB(A)

• Power Consumption: 520 W

• Rotor Recognition Method: Auto

• Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous

• Safety Certification: CE;  FCC

• Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)

Features:

Easy to read display panels and intuitive controls with your choice of EASYset soft-touch keypad or QUIKset rotary switch control. The low height of the Legend RT at just 12.4 inches makes rotor loading and unloading easier than ever.

• Safe Operation for you and you sample with SMARTspin

The SMARTspin Imbalance Detection System provides optimum run stability for all rotors at all speeds and allows for eye balancing of sample tubes

Wide Range of rotors for every application

• Rotors for every application makes the Legend RT the flexible choice. Process three liters of sample in the 4 x 750mL rotor's round buckets - then change to rectangular buckets which can accomodate twice as many tubes as previous models. Legend rotors offer outstanding capacity and high RCFs for tissue culture, virological tests, DNA/protein precipitations, and more!

Additional Specifications for the Legend

• Drive Brushless induction drive
• Control Microprocessor-controlled via EASYset™ (Soft Touch Keypad) or QUIKset™ (Rotary Switch Control)
• Speed Range 300 - 15,000 rpm, adjustable in 100 rpm increments (QUIKset™) or 10 rpm increments
• /Accel. Profiles 9/9 (EASYset™) or brake on/off and soft brake (QUIKset™)
• Program Memory 4 plus a pre-temp program (EASYset™ only)
• Functions RCF pre-selection, quick run, automatic rotor recognition, and imbalance detection
• Run Time 0 - 9 hrs 59 min, continuous operations
• Temperature Range -9 to +40ºC, CFC-free refrigerant
• Design Galvanized steel chassis with armored chamber
• Safety Lid lock and lid interlock (2 automatic lid locks)
• Electrical Requirements 120VAC/60Hz
• Dimensions 14.2in.H x 28.7in.W x 26.2in.D (working height: 12.5in)
• Weight 275 lbs (125 kg)

Specifications:

Overall Dimensions (DxWxH): 17.9” x 17.4” x 12”  455mm x 440mm x 305mm

Chamber Volume: 7.5 Liter  2 Gallon

Chamber Dimensions: 7” x 13”  230mm x 470mm

Tray Capacity: 3 Trays

Tray Dimensions: 11.6” x 4.7" x 0.8” (295mm x 120mm x 20mm)

Standard Cassettes Capacity: 2 half

Voltage & Frequency: 120V  50-60Hz

Power & Current: 1350W  11A

Shipping Weight:  54 Lbs.  25 Kg.

Warranty: 1 year parts and labor

NOTE *Standard half size cassette is 8” x 5.5”.

Description:

• Extra-large
• Chemical-resistant
• Cross-linked polyethylene bowl
• Cast-iron base with nonskid feet for stability

Specifications:

• Maximum Speed: 5100 rpm
• Weight: 50 lbs
• Dimensions (H x L x W): 14” x 20” x 16”

Satisfies all sterilization needs without compromising quality, safety or reliability. Offers automatic shut off at the end of both sterilization and dry cycles, a long life electro polished chamber and door, and double safety locking devices preventing the door from opening while chamber is pressurized.

Specifications:

• Capacity: 19 L
• Cassette Capacity: 2 Full, 2 Half
• Dimensions: 20" x 21.5" x 14.4" in. (W x D x H)
• Cold Cycle Time: 27 min
• Hot Cycle Time: 13 min
• Number of Trays: 3
• Tray Dimensions: 6.7" x 16.3" x 0.8" in. (W x D x H)
• Chamber Dimensions: 9” x 18” in. (Diameter x Length)

Designed for sterilizing laboratory and medical equipment, media and even liquids. Provides fast, safe, and dependable sterilization without any need for special plumbing or venting. Features a fast exhaust option which reduces cycle time for solid goods and a slow exhaust option which releases chamber pressure slowly and prevents boiling over of liquids. Cold air pockets are eliminated by continuous pressure purging which ensures uniform sterilization.

Specifications:

• Capacity: 23 L
• Cassettes Capacity: 3 Full, 3 Half
• Temperature Range: 105° to 137°C
• Dimensions: 20” x 21.6” x 14” in. (W x D x H)
• Cold Cycle Time: 14 min
• Hot Cycle Time: 11 min
• Number of Trays: 4
• Tray Dimensions: 6.6” x  16” x 0.78” in. (W x D x H)
• Timer: 60 mins
• Sterilization Time: 0 to 59 mins
• Pressure: 0 to 40 psi
• Drying Time: 0 to 99 mins
• Chamber Dimensions: 10” x 18” in. (Diameter x Depth)

Description:

• Electronically controlled models feature microprocessor control with digital display of operating parameters
• Four fully adjustable, one-button programs provide easy, reproducible runs for wrapped and unwrapped items as well as liquids
• User sets and stores operating parameters of temperature (105 to 137°C, 221 to 279°F)
• sterilization time (0 to 59 minutes)
• pressure (0 to 40psi)
• drying time (0 to 99 minutes)User also sets and stores units of °C or °F and psi or bar. A sensor prevents operation until the door is securely closed. In-line filters protect all pressure valves. A low-water signal indicates the reservoir needs to be filled.

Features:

• Cycle operation: manual
• Type: Steam
• High grade 316L stainless steel sterilization chambers resist corrosion
• Large 3.25L water reservoir permits users to control the purity of the sterilizing steam and reduces frequency of fill-ups
• analog controls and analog display of pressure and temperature
• temperature:105 to 137°C, 221 to 279°F
• sterilization time:0 to 59 minutes
• pressure: 0 to 40psi
• drying time: 0 to 99 minutes
• chamber size (DXWXH): 50.8 x 50.8 x 38.1 cm (20 x 20 x 15")
• Capacity: 23 L (0.81