Used Lab Equipment

Features:
This is a used Chiu technical fo-150 lumina fiber optic illuminator light source


Specifications:

• Fuse: 5x20mm 3.15 AmpF

• Output: 150 Watts

• Input: 115v 60Hz 3 Amp

Description: The Thermo Scientific EASYpure II RF is a batch-fed water purification system designed to provide Type I reagent-grade water with extremely low organic carbon content. It uses a three-stage deionization process combined with a 0.2 micron final filter to polish pretreated water (distilled, deionized, or reverse osmosis) to produce water with a resistivity of up to 18.2 megohms-cm and with a total organic carbon content of less than 10 ppb. Water resistivity is continuously sensed by a resistivity cell and displayed on a digital display. The EASYpure II RF is designed to be a bench mounted unit. If wall mounting is required, contact Technical Services for information on a wall bracket and mounting accessory.

Specifications:

• Dimension Requirements: 12" W X 19" D X 18 1/8" H (30.5 cm X 48.3 cm X 46.0 cm)

• Clearance Requirements: Sides - 4" (10.1 cm) minimum to allow air flow, Above - 12" (30.5 cm) minimum for reservoir replenishment

• Storage Reservoir Capacity: Approximately 6.5 liters usable, 7.0 liters total

• Electrical Requirements:  100-240 VAC +5% -10%, 47-63 Hz.

• Resistivity: 18.2MW·cm at 25°C

• Conductivity: 0.055 µS/cm

• Feedwater Source: Pretreated

• Flow Rate: Up to 1L/min.

• Bacterial Content: <1CFU/mL

• Particles >0.2µM/mL: <1 μM/mL

• TOC Monitor with UV Intensity Monitoring: No

• Feed Water Monitoring: No

• Feedwater Pressure: 100psig (6.9 bar)

• Voltage: 100 to 240VAC

• Hertz: 50/60Hz

• Inlet Water Temperature (Metric): 4° to 40°C
• Electrical Requirements: 100 to 240VAC 50/60Hz

Features:

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

Specifications:

• Volume of the steam space: 163 cca l
• Min. distance between trays:
• Storage area (w x d): 520 x 335 mm
• Max. power: 700 W
• Protective system: IP 20
• Mains: 50/60Hz 230 V
• Cooling/down time from 22 °C to 10 °C: < 21 min
• Heating/up time to 37 °C from the ambient temperature: 11 min
• Working temperature from 0: 0 to 100 °C
• Temperature accuracy in time: 0,2 ± °C
• Temperature accuracy in space at 10 °C: 0,5 ± °C
• Recovery time after 30 s door open:
  at 37 °C: 5 min
  at 50 °C: 6 min
• Heat emission at 37 °C: 70 W
• Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
• High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
• Suitable for demanding and accurate tests and samples cultivation
• Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

Specifications:

• Volume of the steam space: 1753 cca l
• Min. distance between trays: 70 mm
• Storage area (w x d): 520 x 485 mm
• Max. power: 2500 W
• Protective system: IP 20
• Mains: 50/60Hz 230 V
• Cooling/down time from 22 °C to 10 °C: 21 min
• Heating/up time to 37 °C from the ambient temperature: 30 min
• Working temperature from 0: 0 to 70 °C
• Temperature accuracy - in time 0: 2 ± °C
• Temperature accuracy - in space at 10 °C 0: 6 ± °C
• Recovery time after 30 s door open:
  at 37 °C: 10 min
  at 50 °C: 10 min
• Heat emission at 37 °C: 200 W
• Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
• High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
• Suitable for demanding and accurate tests and samples cultivation
• Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

Specifications:

• Volume of the steam space: 299 cca l
• Min. distance between trays: 70 mm
• Storage area (w x d): 520 x 485 mm
• Max. power: 850 W
• Protective system: IP 20
• Mains: 50/60Hz 230 V
• Cooling/down time from 22 °C to 10 °C: < 17 min
• Heating/up time to 37 °C from the ambient temperature: 11 min
• Working temperature from 0: 0 to 100 °C
• Temperature accuracy - in time: 0,2 ± °C
• Temperature accuracy - in space at 10 °C: 0,5 ± °C
• Recovery time after 30 s door open:
  at 37 °C: 2 min
  at 50 °C: 3 min
• Heat emission at 37 °C: 63 W
• Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
• High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
• Suitable for demanding and accurate tests and samples cultivation
• Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

Specifications:

• Volume of the steam space: 524 cca l
• Min. distance between trays: 70 mm
• Storage area (w x d): 520 x 485 mm
• Max. power: 1700 W
• Protective system: IP 20
• Mains: 50/60Hz 230 V
• Cooling/down time from 22 °C to 10 °C: < 19 min
• Heating/up time to 37 °C from the ambient temperature: 22 min
• Working temperature from 0: 0 to 100 °C
• Temperature accuracy - in time 0: 3 ± °C
• Temperature accuracy - in space at 10 °C: 1 ± °C
• Recovery time after 30 s door open:
  at 37 °C: 10 min
  at 50 °C: 13 min
• Heat emission at 37 °C: 123 W
• Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
• High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
• Suitable for demanding and accurate tests and samples cultivation
• Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

Specifications:

• Volume of the steam space: 89 cca
• Min. distance between trays: 70 mm
• Storage area (w x d): 380 x 335 mm
• Max. power: 700 W
• Protective system: IP 20
• Mains: 50/60Hz 230 V
• Cooling/down time: from 22 °C to 10 °C < 21 min
• Heating/up time to 37 °C from the ambient temperature: 11 min
• Working temperature: from 0,0 to 100 °C
• Temperature accuracy: in time 0,2 ± °C
• Temperature accuracy: in space at 10 °C 0,5 ± °C
• Recovery time after 30 s door open:
            at 37 °C: 5 min
            at 50 °C: 6 min
• Heat emission at 37 °C: 55 W
• Chamber volume: 55-liter
• Working temperature of from: 0°C up to 100°C
• Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
• High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
• Suitable for demanding and accurate tests and samples cultivation
• Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

The high technical standard of our FRIOCELL incubators allows tempering of samples, precise both in time and space. The unique cooling system offers an exact and cost saving simulation of the selected natural processes and reduces the samples evaporation. The incubators can be used in biotechnology, botany, zoology, food industry, cosmetics, chemical industry, etc. where it allows an extremely low duration of the temperature recovery.

Specifications:

• Volume of the steam space: 876 cca l
• Min. distance between trays:70 mm
• Storage area (w x d): 920 x 485 mm
• Max. power: 2000 W
• Protective system: IP 20
• Mains: 50/60Hz 230 V
• Cooling/down time from 22 °C to 10 °C: < 21 min
• Heating/up time to 37 °C from the ambient temperature: 13 min
• Working temperature from 0: 0 to 100 °C
• Temperature accuracy - in time 0: 4 ± °C
• Temperature accuracy - in space at 10 °C: 1 ± °C
• Recovery time after 30 s door open:
  at 37 °C: 6 min
  at 50 °C: 6 min
• Heat emission at 37 °C: 148 W
• Patented cooling system (ecological cooling medium R134a) offers a precise and quick simulation of natural processes and reduces the risk of samples evaporation; various types of the inner chamber lighting can be added to the unit
• High operation comfort; precise temperature regulation; possibility to reach even extremely short times of temperature changes and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door and possibility to regulate the fan speed
• Suitable for demanding and accurate tests and samples cultivation
• Comfort model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LCD display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

• Variable flow up to 70 L/min & pressure up to 116 psi
• Multi-Stage Purification™ producing analytical grade nitrogen gas up to 99.5% purity
• 2 year comprehensive manufacturer’s warranty*
• Touch-screen full colour user interface for ease of operation
• ECO (Electronic Compressor Optimisation™) technology for low energy consumption and compressor durability
• Next-generation high performance premium compressors, engineered exclusively for Genius X
• Smaller & quieter than previous generation of Genius
• On-board service scheduling and system diagnostics
• Additional compressor capacity for lower flow applications

Specifications:

• Technical Specifications:
• Max Flow Rate: up to 70 L/min
• Max Pressure: 116 psi (8 bar)
• Gas Outlets: 1 x ¼” BSPP
• Purity**: 95-99.5%
• Max Relative Humidity: 80% RH @ 31°C
• Max Altitude: 3000m
• Particles: < 0.01 μm
• Phthalates: Phthalate & BHT Free
• Suspended Liquids: None
• Non-Methane Hydrocarbon Content: < 1 ppm NMHC
• Operating Temperature: 5°C (41°F) to 35°C (95°F)
• Electrical Requirements: 230VAC, 50/60Hz, 11.3A
• Power Consumption: 2530 VA
• Heat Output: 8785 BTU
• Noise Level†: 59 dB
• Generator Dimensions (H x W x D): 1000 x 570 x 710 mm    39.4 x 22.5 x 28’’
• Generator Weight: 147 kg / 325 lbs

Constant automatic monitoring with the LV11 automatic feeder – item by item. Capsules, tablets or small electronic and mechanical components are fed to the balance quickly by the LV11 automatic feeder. Large weighing series are radically simplified. The LV11 is therefore especially suitable for statistical quality control (SQC) in the pharmaceutical industry.

Technical data:

• Power supply: 230V (200…250V) or (switchable) 115V (100…125V)
• Frequency: 50…60Hz
• Power consumption: 15VA
• Item size: Ø 1…33mm
• Vibration levels: 4
• Dimensions: 225 x 225 x 260mm (WxDxH)
• Weight: 11.5kg
• RS232 interface parameters:
  • 9600/8/No parity/Xon/Xoff (factory setting)
  • 9600/8/No parity/DTR/DSR
  • 2400/7/Even/Xon/Xoff
  • 2400/7/Even/DTR/DSR

Features:

The M7 is an accurate, reliable and precise system which is suitable to both routine analysis and precision research applications. It can work with different manufacturers’ GC systems. The M7 MS can be widely used in food safety, environmental protection, material chemical industry, college education & research, life science, medicinal research, criminal investigation and many other fields. These applications benefit from its high performance, long service life and PERSEE’s strong after-sales service.

â—† User-friendly design makes the maintenance much easier 

â—† Compatible with different brand and models GC system

â—† The powerful GC-MS workstation is intuitive, simple and easy to operate. 

â—† The unique remote-control function enables powerful technical support 

â—† Competitive price and maintenance cost  

â—† Lifetime free workstation software update

Specifications:

• GC&MS Interface: Capillary direct interface,independent temprature control, 50-300 ℃
• Filament: Dual for EI,maximun emitting current 300uA
• Ionization Enegy: 10-100 eV adjustable
• Ion Source Temprature: Independent temprature control, maximum 350 ℃, adjustable
• Mass Analyzer: High precision metal Molybdenum Quadrupole with pre-quadrupole
• Backing Pump: Mechanical pump, geometric pumping speed 165 L/min
• Turbo Pump: Turbo molecular pump, pumping speed 71 L/s, 260 L/s optional
• Detector: Electron muliplier
• Mass Range: 1.5-1050 u
• Mass Accuracy: ±0.1 u
• Resolution(R): Unit mass resolution
• Mass Stability: ±0.1 u/48h
• Maximum Scanning Speed: 11000 u/s

Multiskan Spectrum makes getting results easier, replacing separate spectrophotometers and microplate reading instruments by providing both functions in one convenient, compact instrument.  The Multiskan Spectrum is truly two instruments in one, combining both cuvette reading capabilities and advanced microplate reading in one convenient, compact instrument.  You can easily take quick absorbance measurements in a cuvette between the cycles of a microplate enzyme kinetics experiment. 

For maximum flexibility, Multiskan Spectrum accepts all microplate for mats from 6- to 384-wells, as well as cuvettes from standard to ultra micro capacities in glass, plastic, or quartz. You can take multiple photometric readings per well on large format plates, or single measure ments requiring just 30 μl in 384-well plates.

Scanning range of 200 – 1000 nm.  The built-in monochromator makes it simple to select any wavelength from 200 nm to 1000 nm in 1 nm steps without ever changing a filter. Sample absorbances can be scanned over the whole spectrum either in microplates or cuvettes.

Typical applications of the Multiskan Spectrum

• UV/Visible spectrophotometry
• Spectrum scan
• Nucleic acid analysis
• RNA concentration (A260)
• ssDNA concentration (A260)
• dsDNA concentration (A260)
• DNA purity (A260/A280)
• Enzyme kinetics
• E.g.,Vmax and Km
• Protein analysis
• Biuret protein determination
• Bradford protein determination
• BCA protein determination

Technical Specifications

Performance

• Wavelength range 200 – 1000 nm
• Read-out range 0 – 4 Abs
• Linearity 0 – 3 Abs, ±/- 2% at 450 nm
• Accuracy ± 1% or ± 0.005 Abs (0 – 2 Abs)
• ± 2.0% (2 – 3 Abs)
• Precision CV < 1% (0 – 2 Abs)
• CV < 2% (2 – 3 Abs)
• Optical bandpass 2 nm
• Wavelength accuracy ± 1 nm
• Stray light < 0.02% at 230 nm

General Specifications

• Microplate types 6-, 12-, 24-, 48-, 96- and 384-well plates
• Wavelength selection Tunable monochromator, 200 – 1000 nm in increments of 1 nm
• Light source 10 W Xenon flash lamp
• Detectors Photodiodes
• Incubator temperature range Ambient (+25°C) +4°C to 45°C
• Mains input 100 – 240 V (50/60 Hz) autoranging
• Power consumption 200 VA
• Dimensions 397 mm (W) x 217 mm (H) x 450 mm (D)
• [15.6” (W) x 8.5” (H) x 17.7” (D)]
• Weight 12.5 kg (27.5 lbs.)

Technical Specifications:

• Curtain Gas (Nitrogen): 12 L/min @ 80 psi
• Source Gas (Dry Air): 26 L/min @ 110 psi
• Exhaust Gas (Dry Air): 8 L/min @ 60 psi
• Max Gas Outlet Pressure: 110 psi
• Min Air Inlet Flow Rate: 90 L/min
• Min - Max Air Inlet Pressure: 120 - 145 psi / 8.3 - 10 bar
• Max Pressure Drop: 8 psi
• Min/ Max Operating Temperature: 5ºC - 30ºC / 41ºF - 86ºF
• Max Relative Humidity: 70%
• Particles: < 0.1μm
• Phthalates: None
• Dimensions (cm/ ins) WxDxH: 27 x 20 x 76 / 10.6 x 8 x 30
• Weight (kg/ lbs): 25 / 55

Asking Price: $4500 w/ 1 year manufacturer warranty and 25,000 hour lamp guarantee

List Price: $4995 (We are discounting 10% off List)

Includes: X-Cite 110LED, speedDIAL remote, 3mm x 1500mm Liquid Light Guide, Accessory Kit (tools, USB cable, power cord)

Does not include Microscope Adaptor

The new X-Cite 110LED from Excelitas Technologies is a compact, white light LED light source for fluorescence imaging applications. Providing excitation for DAPI, GFP, mCherry and Cy5 routine imaging, the X-Cite 110LED offers exceptional field uniformity through liquid light guide delivery. With manual, PC and TTL control, the X-Cite 110LED has LEDs guaranteed for 25,000 hours with no lamps or modules to replace. X-Cite 110LED is the newest addition to the X-Cite family which is known for high quality, reliability and exceptional delivery.

Features:

• LED Technology
• White Light Excitation
• Light Guide Delivery
• Multiple Control Options
• Small Footprint
• Optimized Thermal Management
• X-Cite Coupling Optics (optional)

Benefits:

• Mercury-free, higher efficiency, stability, instant ON/OFF and long lifetime
• Excitation of commonly used fluorophores such as DAPI, GFP/FITC, mCherry/Texas Red, and Cy5
• Flexibility in light delivery as well as unit location
• Simple operation through USB, TTL or speedDIAL
• Minimal space requirement; less bench top real estate used
• Maximum LED output, lifetime, stability and reliability
• Efficient optical output and uniformity with the highest performing coupling optics available

Technical Specifications

• Wavelength Range: 360-660nm
• LED Peaks/FWHM: 385/30 nm, 475/40 nm, 560/80 nm, 640/40 nm
• External Power Supply: Universal input 100-240VAC, 50/60Hz
• Power Consumption: 160W
• LED ON/OFF Response Times: 100μs TTL / 1 ms USB
• Control Options:        
  • ON/OFF - TTL compatible
  • speedDIAL
  • RS-232 commands (SDK available), USB
• I/O Connections:      
  • BNC input
  • USB (B-type)
• Dimensions (W x H x D): 95 mm x 230 mm x 212 mm (3.7" x 9.1" x 8.4")
• Weight: 3 kg (6.6 lbs)
• Certifications: CE, RoHS
• Warranty: LEDs – 25,000 hours or 3 years