Used Lab Equipment

Specifications:

• Outside Dimensions: 48”w x 42”h x 24”d
• Inside Dimensions: 47”w x 22”h x 23”d
• Weight, including filters: 225 lbs.
• Low Airflow Alarm: Audible/Visual
• Volume of Filtered Air: 920 CFM
• Linear Face Velocity: 80 FPM
• Electrical: 110V, 2A, 220W, ±10%
• Speed Selection: Variable Speed
• Construction: Top Material- ABS, Front Panel and Sides - Lexan Polycarbonate, Base Material - Polupropylene

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 31 1/2 ’’ x 24 2/3 ’’x 45 3/4 ’’ / 53’’
• Internal Dimensions (W x D x H): 30 1/8 ’’ x 21 1/2 ’ x 34’’
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 1
• Processed Air Flow: 1P: 265 m3 /h, 1P1C: 164 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 70 W
• Amperage absorbed: 0.26 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 39 3/8 ’’x 24 3/4 ’’x 45 3/4 ’’/ 53’’
• Internal Dimensions: (W x D x H): 38’’x 21 1/2 ’’x 34’'
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 1
• Processed Air Flow: 1P: 265 m3 /h, 1P1C: 164 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 70 W
• Amperage absorbed: 0.26 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 50 1/4 ’’x 31 1/2 ’’x 51 3/4 ’’ / 59 7/8 ’’
• Internal Dimensions: (W x D x H): 48 7/8 ’’x 26 1/4 ’’x 41”
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 3
• Processed Air Flow: 1P: 768 m3 /h, 1P1C: 492 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 191 W
• Amperage absorbed: 0.72 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 71’’ x 31 1/2 ’’x 51 3/4 ’’ / 59 7/8 ’’
• Internal Dimensions: (W x D x H): 69 1/2 ’’x 26 1/4 ’’x  41’’
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 4
• Processed Air Flow 1P: 1024 m3/h, 1P1C: 656 m3/h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 261 W
• Amperage absorbed: 0.98 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

• Glacier white, dry powder epoxy-coated aluminum construction.
• 3/16 in thick tempered safety glass sides.
• Air-mixing, epoxy-coated steel rear baffle.
• Two roughing pre-filters.
• Two 1.5 in diameter utility ports with plastic plugs.
• Gas-assisted filter clamping mechanism.
• Control panel with LCD for display of filter time elapsed; programmable timer for audio/visual alarm; ALARM/MUTE switch with LED indicator; SET FILTER TIME, UP/DOWN, and ENTER programming switches; and event timer.
• Built-in, non-sparking motor/blower.
• Pre-wired with two 20-watt fluorescent lights and switches for blower and light.
• Angled ¼ in thick tempered safety glass sash, adjustable to two operating height positions (13 in and 15 in to work surface), pivots to full open position (24.25 in) for cleaning and transfer of material.
• Face velocity of 100 fpm (236 CFM) when sash opening to work surface is 13 in and 80 fpm (236 CFM) when sash opening is 15 in.
• Air sampling syringe for test port.
• Shipped fully assembled.

Specifications:

• Power Requirements: 115 V, 60 Hz, 3 A

• Weight: 290 lbs

Specifications:

• Capacity: 50 L
• Flow rate: 144 L/min
• Dimensions: 75” x 58” x 81” (W x D x H)
• Weight: 216 lbs (98 kg)

Description:

With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
Built-in PID microprocessor-based controller for close uniformity with set temperatures
Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
Tempered glass inner door to view samples
Temperature recovery is within two minutes
Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
5-amp electrical outlet to support other apparatus

Specifications:

Temperature range: 5 to 75°C
Capacity: 3.8 cu ft, 96.3L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 19 in.
Exterior Dimensions: 26 x 23.5 x 33 in.

Description:

Ideal for protocols that only require ambient temperatures such as staining, some

solubility studies, extraction procedures, and washing procedures.

Features:

• Microprocessor PID control
• Automatic Calibration Function
• Intuitive LCD controller displays time, frequency and temperature
• Easy-set digital timer（1 ~ 5999min）
• Continuous operation guarantee, maintenance-free, easy to clean
• Variety choices of accessories
• Built-in RS-232 port and USB port for external control and data collection (optional)

Safety:

• Built-in power interruption protection function, automatic run after power interruption;
• Over current protection

Specifications:

• Speed Range: 40 ~ 250 rpm
• Frequency: 40 rpm
• Maximum Capacity: 2000ml
• Amplitude: 20mm
• Size of platform(in): 10.0 x 10.0
• Exterior Dimension (W x H x D): 11.4 x 4.3 x 14.8(in)
• Timer: 1 ~ 5999 min
• Power Requirements: AC 100V ~ 240V 50/60Hz

Description:

Ideal for protocols that only require ambient temperatures such as staining, some

solubility studies, extraction procedures, and washing procedures.

Features:

• Microprocessor PID control
• Automatic Calibration Function
• Intuitive LCD controller displays time, frequency and temperature
• Easy-set digital timer（1 ~ 5999min）
• Continuous operation guarantee, maintenance-free, easy to clean
• Variety choices of accessories
• Built-in RS-232 port and USB port for external control and data collection (optional)

Safety:

• Built-in power interruption protection function, automatic run after power interruption;
• Over current protection

Specifications:

• Speed Range: 40 ~ 300 rpm
• Frequency: 40 rpm
• Maximum Capacity: 4000ml
• Amplitude: 20mm
• Size of platform(in): 17.7 x 17.7
• Exterior Dimension (W x H x D): 15.4 x 4.9 x 19.5(in)
• Timer: 1 ~ 5999 min
• Power Requirements: AC 100V ~ 240V 50/60Hz

Description:

Ideal for protocols that only require ambient temperatures such as staining, some

solubility studies, extraction procedures, and washing procedures.

Features:

• Microprocessor PID control
• Automatic Calibration Function
• Intuitive LCD controller displays time, frequency and temperature
• Easy-set digital timer（1 ~ 5999min）
• Continuous operation guarantee, maintenance-free, easy to clean
• Variety choices of accessories
• Built-in RS-232 port and USB port for external control and data collection (optional)

Safety:

• Built-in power interruption protection function, automatic run after power interruption;
• Over current protection

Specifications:

• Speed Range: 40 ~ 300 rpm
• Frequency: 40 rpm
• Maximum Capacity: 9000ml
• Amplitude: 20mm
• Size of platform(in): 17.7 x 17.7
• Exterior Dimension (W x H x D): 19.3 x 5.4 x 23.8(in)
• Timer: 1 ~ 5999 min
• Power Requirements: AC 100V ~ 240V 50/60Hz

New ** Built to order Cleanrooms

Laboratory incubator with a 111-liter chamber volume. Patented cooling system (ecological cooling medium R134a) and air flow in the chamber ensure a quick and precise distribution of the preset temperature and humidity in the chamber, which allows an ideal process of samples heating and reduction of humidity condensation in the chamber.

Specifications:

• Interior of stainless steel material: volume (111 l), depth (370 mm), width (540 mm), height (530mm)
• Volume of the steam space: 162 l
• Working temperature (from 0.0 to): 99.9 °C
• Heat emission at 37 °C: 70 W
• Outer dimensions: depth (640 mm), width (760 mm), height (1100 mm)
• Weight: 207 kg (brutt cca)