Used Lab Equipment

Description:

The NuAire US AutoFlow Automatic CO2 water-jacketed incubator has been designed to provide a reliable controlled in vitro environment for optimum tissue cell culture growth. The US AutoFlow offers laboratory technicians an incubator which, after set-up, virtually runs itself to dependably control temperature and CO2 levels, with an optional relative humidity control, providing optimum conditions for culture growth within the chamber. The US AutoFlow is run by a programmable microcontroller that samples input sensors, sets control outputs, makes corrections through the use of fuzzy logic, and displays status on the control panel. This provides for an exceptionally stable interior environment.

Specifications:

• Input Voltage: 115 VAC
• Input Current: 5 A
• Input Frequency: 60 Hz
• Input Phase#: 1
• Dimensions (W x D x H): 31” x 25” x 34.25” (78.74 cm x 63.50 cm x 86.99 cm)

Specifications:

• Dimensions: 25.5” x 40.5” x 27” (W x H x D)
• Weight: 218 lbs
• Shelf capacity: 20 shelves
• Max. weight capacity: 30 lbs
• Temperature uniformity: ±0.2°C

Description:

Designed to provide an optimal, stable growing environment for cultures. 5.8 cu.ft. interior capacity. Ideal for cell biology, viral growth, tissue culture, genetics studies, cancer research, embryo growth and microbiological/biochemical assays.

Features:

• Thermal conductivity CO2 sensor provides accurate CO2 control for applications with more consistent temperature and humidity levels.
• CO2 specifications:
• range: 0 to 20%
• control sensitivity: 0.1%
• stability: ±0.1%
• CO2 auto shut-off upon door opening. Factory calibrated at 5 and 10%.
• Temperature specifications:
• range: 5°C above ambient to 60°C
• control sensitivity: ±0.1°C
• uniformity: ±0.4°C at 37°C.
• Factory calibrated at 37°C.
• A water-jacket surrounds interior chamber for thermal stability and uniform heating.
• Features include an audible/visual CO2 alarm programmable for high/low deviation from setpoint, CO2 auto shut-off and a CO2 test port in center of glass door. Temperature indicators include water-jacket temperature indicator and audible/visual programmable temperature alerts on high/low deviation from setpoint.
• Tempered inner glass door is heated by outer door to prevent condensation. Quick response and recovery after door openings.
• Has a 1.5" porthole in the rear wall with silicone stopper, adjustable levelling feet, closed-cell silicone inner door gasket that maintains a positive seal and water-jacket drain.
• Comes with a gas input HEPA filter. Optional in-chamber HEPA filter removes 99.97% of airborne particulates such as hair, pollen, plant spores, skin and bacteria to dramatically improve air quality and provide additional protection from contamination. Maintains still air culture environment without high-velocity airflow (any filters that are with the chamber are not guaranteed)
• Reversible inner and outer doors allow left-to-right or right-to-left opening.
• Control panel key switch for protection against unauthorized access.
• RS485 data port.
• Remote alarm contacts. Battery back-up for alarm system.
• Autoclavable water pan helps to manage humidity, the primary factor in preventing cell and media desiccation.
• Includes 2 perforated, removable stainless steel shelves. Expandable to 20 shelves.

Description:

These low-maintenance incubators employ advanced, air-jacketed temperature control technology to ensure an optimal and stable growing environment for cell and tissue cultures. Internal shelves and supports are easily installed and removed without tools. Easy-to-use interface panel features separate large LED displays for temperature and CO2 parameters and convenient, touch-sensitive membrane controls that provide the status of incubator functions.

Specifications:

• Dimensions (W x D x H): 25.1 x 34.1 x 30.2” (637 x 867 x 766 mm)
• Chamber Volume: 151 L
• Weight: 154.3 lbs. (70 kg)
• Ambient Temperature Range: +18-33°C

Description:

Analog orbital shakers are designed for a wide range of applications, including cell cultures that require accurate and reproducible results.

• 15.9 kg (35 lb.) capacity
• Microprocessor controls
• Continuous or timed operation

They provide reproducible motion that is evenly distributed through the platform's entire surface. Operating features include variable speed microprocessor control that provides consistent, uniform mixing. An integrated analog timer can be set from 1 to 120 minutes. A powerful triple eccentric drive and brushless motor ensure reliable service in continuous duty and can handle loads up to 15.9 kg (35 lbs.). Shakers can run in cold rooms, incubators, and CO2 environments from 0 to 40°C (32 to 104°F). To avoid splashing or sample loss, a ramping feature slowly increases speed to the desired set point.

Specifications:

• Environmentally Preferable Attribute: Product and/or packaging is recyclable or reduces waste
• Weight: 49 lbs. (22.2 kg)
• Timer Range: 1 minute to 2 hours
• Tray dimensions (L x W): 13” x 11" (33 x 28 cm)
• Max. Load: 35 lbs. (15.9 kg)
• Dimensions (L x W x H): 16.25” x 14” x 5.75" (41.3 x 35.6 x 14.6 cm)

Features:

Automatically controls oxygen, C02, and temperature. Ideal for tumor cell and stem cell research. The Hypoxia Chamber Glove Box is ideal for tissue culture work, including tumor cell and stem cell research. It features a color operated "touch screen" for automatically controlling oxygen levels, temperature levels, and carbon dioxide levels. This new controlled Hypoxia Chamber is available with up to six (6) individually controlled compartments inside the  glove box. A side chamber is available for sample preparations and / or a microscope viewing port. Each cubicle has its own temperature, oxygen, and CO2 controls. It also includes a side access door and transfer chamber.

Specifications:

• Interior Dimensions: 41"w x 28"d x 26"h
• External Dimensions: 60"w x 38"d x 31"h *width includes transfer chamber
• 8" Color Panel Touch Screen.
• Thermoelectric Assembly (Peltier device) O2 Sensor and CO2 sensor.
• Password protected, configurable PID control.
• Platinum RTD with sealing gland.
• One touch, on-screen datalogging.
• N2, CO2, and O2 gas hook-up.
• Air circulation fan Inert gas hook-up.
• Configurable for up to six individually controlled sampling chambers.
• Ethernet port connection for data logging.

Features:

This Percival® Scientific Arabidopsis Chamber is specifically designed for facilitating the growth of Arabidopsis plants. Meet all your requirements for proper plant growth by using the chamber. This uniquely designed chamber incorporates two individually controlled environments into one compact footprint, providing you with optimum conditions in a single sustainable system. Easily control the temperature, humidity and CO2 within the chamber and manage air flow in each tier of shelves using the capable IntellusUltra™ controller. Lighting events are programmable as well using the control system.

Specifications:

• Temp Range (with Lights On): 10-44+/-0.7 ºC
• Interior Space (volume): 29.1 ft3
• Work Area: 10.8 ft2
• Maximum Growing Height: 20 in
• Exterior Dimensions: 33.5 in (W) 33.6 in (D) 77.9 in (H)
• Light Intensity (6" from lamp): 250 µmoles/m2/s
• # of Tiers: 2

Features:

Specifications:

• Nutrients/Metabolites: Glutamine, Glutamate, Glucose, Lactate, Ammonium
• Acid/Base Status: pH, PO2, PCO2
• Electrolytes: Sodium, Potassium
• Calculated Parameter: Osmolality, Air Saturation, CO2, Saturation, HCO3

Features:

BioSpa™ 8 Automated Incubator links BioTek readers and imagers together with washers and dispensers for full workflow automation of up to 8 microplates or other labware. BioSpa 8 can automate your workflows, from ELISA to long term live cell assays. Temperature and CO₂/O₂ control, plus humidity monitoring and lid handling ensure an ideal environment for cell cultures during all experiment stages, with minimal manual intervention. BioSpa's software records and reports session timelines and environmental conditions, while customizable text and email alerts assure confidence during long and short term runs. Link a washer or dispenser and a plate reader or imager for start-to-finish workflow automation.

Specifications:

• Description: Incubation to 45°C and CO2/O2 control and monitoring, water pan and humidity monitoring
• CO2 Control : Range 0 – 20%,
• Control resolution ±0.1%,
  • Stability: ±0.2 at 5% CO2; O2
• Control: Range: 1 – 19%,
• Control resolution:±0.1%,
  • Stability: ±0.2 at 1% O2
• Humidity: rH 80 to 95% (lidded plates and 5% CO2)

High-quality family of climatic boxes with active simulation of temperature, humidity and lighting option and chamber volume 111 liters. Patented newly developed cooling system with vertical winding for easier removal of condensate and integrated overpressure steam generator develop stable parameters of humidity within the range of 10-98% and it reacts very quickly to requirements of change with minimal impact on temperature change. Exact infrared sensor CO₂, exact valves and patented circulation of inner atmosphere arranges regulation of CO₂ within the range of 0,1-20% for simulation of growth conditions for green plants or tissue cultures (option).

Specifications:

• Interior of stainless steel material: volume (111 l), depth (380 mm), width (540 mm), height (535 mm)
• Volume of the steam space: 167 l
• Working temperature (from 0.0 to): 100 °C
• Heat emission at 37 °C: 70 W
• Outer dimensions: depth (755 mm), width (780 mm), height (1187 mm)
• Weight: 220 kg (brutt cca)

High-quality family of climatic boxes with active simulation of temperature, humidity and lighting option and chamber volume 707 liters. User-friendly control using the touch display, integrated data logger, multi-language communication, 100 programs – each of them with up to 100 segments offering unique interface suitable for simple applications and for demanding users as well. Exact infrared sensor CO₂, exact valves and patented circulation of inner atmosphere arranges regulation of CO₂ within the range of 0,1-20% for simulation of growth conditions for green plants or tissue cultures (option).

Specifications:

• Interior of stainless steel material: volume (707 l), depth (530 mm), width (940 mm), height (1415 mm)
• Volume of the steam space: 878 l
• Working temperature (from 0.0 to): 100 °C
• Heat emission at 37 °C: 148 W
• Outer dimensions: depth (885 mm), width (1500 mm), height (1880 mm)
• Weight: 500 kg (brutt cca)

The ELx405 Select is the world’s first deep well microplate washer that aspirates and dispenses into 96- and 384-well plates without requiring specialized manifolds. ANSI/SBS standard height microplates can also be washed, making the ELx405 Select a total solution for all your laboratory’s microplate washing workflows. Wash processes used in cell culture and plasmid DNA preparation are automated with the ELx405 Select – there’s no need for specialized instrumentation. ELx405 Select can also process magnetic and polystyrene bead protocols, making it a versatile plate washer for many laboratories. The ELx405™ Select is automation compatible and its patented Dual-Action™ manifold is particularly useful in cell-based assays. This product is ideal for all standard and deep well microplate washing requirements.

Specification:

• Microplate types: 96- and 384-well, low profile and standard height, deep well plates up to 50 mm
• Onboard software: Create, edit or run multiple protocols
• Software (computer control): LHC2 pc software
• Shaking: Programmable up to 60 minutes (Slow, medium, fast or variable)
• Soaking: Programmable up to 60 minutes
• Automation: BioStack (for standard plate heights only) and 3rd party automation compatible (deep well and standard plates)
• Manifold types: 96-tube Dual-Action manifold for 96- & 384-well washing
• Volume range: 50 - 3000 µL/well, in 1 µL increments
• Wash cycles: 1-10
• Buffer/reagent selection: Auto switching module for up to 4 buffers (option)
• Supply bottle: 4 L or 10 L (optional)
• Dispense precision: ≤3% CV: 300 µL/well (96-well washing)
• Residual volume: <2 µL/well (standard & deep well 96-well plates)
• Wash speed: 96-wells, 300 µL/well, 3 cycles (<30 seconds); 384-wells,100 µL/well, 3 cycles (<80 seconds)
• Flow rates: High flow to low flow, optimized rates for cell assays
• Sterilization: chemical
• Power: 100 - 240 Volts AC 50/60 Hz
• Dimensions: 14" W x 17" D x 11" H (35.6 x 43.2 x 27.9 cm)
• Weight: 30 lbs (13.5 kg)

Specifications:

• Style: Console
• Manifold: 14 port
• Ice Holding Capacity: 12L
• Collector Temperature: -50° C, -58° F
• Dimensions: 31.8" w x 29.6" d x 36.6" h
• Electrical: 230V, 60 Hz, 9A
• Plug Type: North America, 230V

Specifications:

• Display unit: Liquid Crystal Display with two rows of sixteen digits
• Keyboard: Four key membrane keyboard
• Number of dispensing channels: 1-, 2- or 4-channels
• Manifold types: 8- or 16-way for parallel processing of 8- or 16-wells, 8- or 16-way Process control manifold
• Volume of solution dispensed:
  • 50 – 3000 μl in 50 μl steps for washing
  • 50 – 400 μl in 50 μl steps for dispensing
• Dispensing accuracy: <= 2 % (300μl dispense volume of wash-buffer, dispense rate: 3, 8-way manifold, Greiner 96-well flat bottom plate).
• Dispensing uniformity: CV: <= 4% over the plate  (300μl dispense volume of wash-buffer, dispense rate: 3, 8-way manifold, Greiner 96-well flat bottom plate).
• Residual volume: Crosswise aspiration: <= 2 μl per well for 96-well flat bottom Greiner plate (asp. rate 3, asp. time 4 sec., head speed 10mm/sec, 8-way manifold, wash buffer in all wells)
• Interface: USB
• Shaking: Linear shaking; high-, medium- and low-setting
• Outside dimensions for plate washing: Width: 27.5 cm, Depth: 36.6 cm, Height: 18.1 cm
• Weight: 6 kg

Ideal for the culturing of non-adherent cells, the Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture. The unique and proprietary heat distribution technology allows the incubator to provide the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination. A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles.

Specifications:

• Temperature Range: Ambient +5° to 60°C
• Temperature Increments: 0.1°C
• Temperature Uniformity: ± 0.5°C*
• Temperature Accuracy: 0.1°C
• Speed Range: 30 to 300rpm
• Speed Increments: 1rpm
• Mixing Orbit: 19mm (3/4 in.)
• CO2 Range: 0 to 20%
• CO2 Increment: 0.1%
• CO2 Accuracy: ± 0.1%
• CO2 Sensor: Dual Beam IR
• Timer: 1 min. to 48 hours / continuous
• Platform Dimensions: 28 x 41 x 33 cm
• Chamber Dimensions: 33.5 x 26 x 39.2 cm
• Chamber Volume: 46L
• Chamber Material: Stainless Steel (316)
• Exterior Dimensions: 16.5 x 18.3 x 21.8 in. / 42 x 46.5 x 55.3 cm
• Weight: 90 lbs / 40.1 kg
• Electrical: 120V or 230V, 50-60Hz (350W)