Used Lab Equipment

• • Features:

    The Bellco Digital Bench-top Roller Apparatus holds 10 glass or plastic roller bottles (110 to 120 mm diameter and up to 22.5 cm in length). The unit features a heavy-duty DC motor and solid-state electronics that operate at bottle speeds ranging from 0.3 to 10.0 rpm with the ability to select clockwise or counter clockwise direction. The digital display panel has a 0.55” LED for easy reading and the apparatus has a locking speed knob.  Rollers are easily removed for replacement by using the special tool provided with each unit. All-Position Drive facilitates the use of lightweight plastic roller bottles by ensuring rotation at each bottle station, independent of any load configurations. Bellco’s unique hex-shaped shafts prevent roller slippage for positive drive. Use of this equipment is limited to conventional laboratory mixing of roller bottles.

    Specifications:

    • Bottle positions: 10 positions (2 Decks @ 5 Positions)
    • Speed range: 0.3 - 10rpm ( default factory preset) +/- 2%
    • Usable roller length: 22.5 cm
    • Roller composition: Non-Transferring chemically resistant rubber
    • Frame composition: Aluminum
    • Environmental Conditions (Operating): Indoor Use, Pollution Degree 2, 4° To 50° C, Relative Humidity 0-90%, Non-Condensing
    • Environmental Conditions (Non-Operating): -10° To 60° C, Relative Humidity 95% Maximum

     

   

Electrophoresis Power Supply

Specifications:

Output Voltage: 500V (Direct Current)

Output Current: 500 mA

Output Power: 250W

Electrophoresis Power Supply

Specifications:

• Output Voltage: 500V (Direct Current)
• Output Current: 500 mA
• Output Power: 250W

250 Volts and 500 milliAmps DC.  Two sets of outputs operate in parallel to provide between 20 and 250 volts, up to 500 milliamps, and up to 75 watts in the constant voltage mode.

Specifications:

• Voltage Steps, Lo Range: 20,30,40,50,60,70,80,90, I00, 110,120, 130
• Voltage Steps, Hi Range: 140,150,160,170,180,190,200,210,220,230,240,250
• Maximum Voltage: 250V
• Maximum Current: 300 mA at 150-250V, 500 mA below 150V
• Maximum Power: 75 watts
• Number of Outputs: 2
• Temperature Range: 0°C -40°C
• Dimensions: 6 x 8 x 4.5 in
• Weight: 5 lbs

Specifications:

• Input Power: 110 Volts or 240 Volts AC, 50/60 Hz, 250 W
• Type Output: Constant Voltage or Constant Milliamps with Automatic Crossover
• Maximum Voltage: 250 Volts
• Maximum Current: 500 Milliamps
• Maximum Power: 125 Watts
• Timer: 0.00 to 24 hrs 00 mins
• Regulation: d1%
• Accuracy: 1.5%
• Number of Output Terminals: Four sets of recessed 4mm output connectors
• Safety Interlock: Load sensing shut-down on disconnect. Key actuation necessary to begin voltage generation. In the event of shutdown due to power interruption, automatic restart is provided

Description:

The Thermo Scientific EC3000-90 Power Supply is a high voltage unit suited for most electrophoresis applications.

Specifications:

• Max Output Voltage: 3000 V
• Max Wattage: 300 W
• Max Amperage: 300 mA
• Input Voltage: 115 V
• Frequency: 50/60 Hz

A benchtop power supply used for providing adjustable DC power for electrophoresis applications.  Operates in constant voltage or constant current mode. Programmable run time and LED display of timer, current, and voltage. 

Specifications:

• Power: Operates up to 200V or 2.0A
• Output Voltage: Up to 500V
• Output Current: Up to 500 mA
• Output Power: Up to 250W

250 Volts and 500 milliAmps DC.  Two sets of outputs operate in parallel to provide between 20 and 250 volts, up to 500 milliamps, and up to 75 watts in the constant voltage mode.

Specifications:

• Voltage Steps, Lo Range: 20,30,40,50,60,70,80,90, I00, 110,120, 130
• Voltage Steps, Hi Range: 140,150,160,170,180,190,200,210,220,230,240,250
• Maximum Voltage: 250V
• Maximum Current: 300 mA at 150-250V, 500 mA below 150V
• Maximum Power: 75 watts
• Number of Outputs: 2
• Temperature Range: 0°C -40°C
• Dimensions: 6 x 8 x 4.5 in
• Weight: 5 lbs

Specifications:

• Incubator Cell Roll System
• 15 position
• Three tier cell roller
• 30.5" w x 24.5" d

The VWR Signature Reach-In Incubators are supplied with six shelves capable of supporting the weight of benchtop instruments. The air jacket design and heated outer door allows for uniform heat throughout the incubators. They incorporate a microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers.
Specifications:

• Exterior Dimensions: 41 x 32 x 88 in

• Interior Dimensions: 35 x 26 x 76 in

• Power Requirements: 120V, 50/60Hz, 16A

• Temperature Range: 5° above ambient to 70°C

• Volume: 40 cubic feet

• Carbon Dioxide Range: 0 - 20%

The VWR Signature Reach-In Incubators are supplied with six shelves capable of supporting the weight of benchtop instruments. The air jacket design and heated outer door allows for uniform heat throughout the incubators. They incorporate a microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers.
Specifications:

• Exterior Dimensions: 41 x 32 x 88 in

• Interior Dimensions: 35 x 26 x 76 in

• Power Requirements: 120V, 50/60Hz, 16A

• Temperature Range: 5° above ambient to 70°C

• Volume: 40 cubic feet

• Carbon Dioxide Range: 0 - 20%

Mechanical convection system ensures even air distribution within the chamber. Fan-cooled, overload-protected refrigeration system offers long, trouble-free service. The 1 amp electrical outlet inside the chamber accommodates stirrers or other apparatus. “Off-set calibration” allows calibration using a reference thermometer. Incubator meets APHA specifications for B.O.D.

Features:

• Microprocessor Temperature Control
• Direct-reading digital thermometer
• Easy Keypad Set and Off-Set Calibration
• Automatic Defrost
• Interior Electrical Outlet
• CFC-Free Refrigerants
• Safety high/low limit controls
• Floor drain channels excess moisture outside
• Welded steel exterior with white easy-to-clean interior.

Specifications:

• Temperature Range:  –10 to 50°C
• Dimensions: 35 x 34 x 78" H
• Capacity: 20 cu ft