Used Lab Equipment

Ideal for most applications including protein mini-gels, SDS-PAGE, and DNA electrophoresis.

Specifications:

• Temperature Range: 0 to 40 °C
• Dimensions: 10” D x 7.5” W x 4” H

Ideal for most applications including protein mini-gels, SDS-PAGE, and DNA electrophoresis.

Specifications:

• Temperature Range: 0 to 40 °C
• Dimensions: 10” D x 7.5” W x 4” H

Includes:

• Cooling Module
• Control Module
• Drive Module

Drive Module 

• Dimensions (W x D x H): 43 x 26 x 14 cm
• Construction: Aluminum chassis
• Weight: 8 kg (17.2 lb)
• Maximum voltage:250 V DC
• Maximum current: 500 mA
• Electrode potentials:Dynamically regulated (feedback adjustment) +/- 0.5%
• Input voltage range:
  • 90–132 VAC/47–63 Hz/0.7 A (maximum)
  • 198–264 VAC/47–63 Hz/0.35 A (maximum)
• Fuses:
  • 5 A Fast Blow for high voltage output (front panel)
  • A Slow-Blow (100/120 V) or
  • 5 A Slow-Blow (220/240 V)

Control Module          

• Dimensions (W x D x H): 31 x 13.5 x 17 cm
• Maximum current: 500 mA
• Allowable voltage gradients:6–6 V/cm, in 0.1 V/cm increments
• Data entry: Keyboard
• Power supply: 250 V maximum, to allow maximum gradient of 6 V/cm, continuously adjustable

Cooling Module

• Chassis: Aluminum
• Dimensions (W x L x H):23 x 42 x 24 cm
• Weight: 14 kg (30.1 lb)
• Compressor:1/12 HP
• Refrigerant:CFC 12
• Heat exchanger:Stainless steel
• Operating range: 5°C–25°C
• Cooling rate (pre-cool):75°C/min from ambient to 14°C
• Cooling capacity (input power): 75 W at 14°C
• Input voltage range       
  • 90–132 VAC/47–63 Hz/4 A
  • 198–264 VAC/47–63 Hz/2 A
• Fuses   
• 3 A Slow-Blow (100/120 V) or
• 0 A Slow-Blow (220/240 V)

Electrophoresis Power Supply

Specifications:

Output Voltage: 500V (Direct Current)

Output Current: 500 mA

Output Power: 250W

Electrophoresis Power Supply

Specifications:

• Output Voltage: 500V (Direct Current)
• Output Current: 500 mA
• Output Power: 250W

250 Volts and 500 milliAmps DC.  Two sets of outputs operate in parallel to provide between 20 and 250 volts, up to 500 milliamps, and up to 75 watts in the constant voltage mode.

Specifications:

• Voltage Steps, Lo Range: 20,30,40,50,60,70,80,90, I00, 110,120, 130
• Voltage Steps, Hi Range: 140,150,160,170,180,190,200,210,220,230,240,250
• Maximum Voltage: 250V
• Maximum Current: 300 mA at 150-250V, 500 mA below 150V
• Maximum Power: 75 watts
• Number of Outputs: 2
• Temperature Range: 0°C -40°C
• Dimensions: 6 x 8 x 4.5 in
• Weight: 5 lbs

Specifications:

• Input Power: 110 Volts or 240 Volts AC, 50/60 Hz, 250 W
• Type Output: Constant Voltage or Constant Milliamps with Automatic Crossover
• Maximum Voltage: 250 Volts
• Maximum Current: 500 Milliamps
• Maximum Power: 125 Watts
• Timer: 0.00 to 24 hrs 00 mins
• Regulation: d1%
• Accuracy: 1.5%
• Number of Output Terminals: Four sets of recessed 4mm output connectors
• Safety Interlock: Load sensing shut-down on disconnect. Key actuation necessary to begin voltage generation. In the event of shutdown due to power interruption, automatic restart is provided

Description:

The Thermo Scientific EC3000-90 Power Supply is a high voltage unit suited for most electrophoresis applications.

Specifications:

• Max Output Voltage: 3000 V
• Max Wattage: 300 W
• Max Amperage: 300 mA
• Input Voltage: 115 V
• Frequency: 50/60 Hz

The Pharmacia Electrophoresis Power Supply EPS 500/400 is an accurately controlled power source of modern design that has been designed for safe and easy operation. The EPS 500/400 is designed to be used with the Pharmacia electrophoresis apparatuses (eg. the Gel Electrophoresis Apparatusus GE 2/4 and GE 2/4 LS, and the Flat Bed Electrophoresis apparatuses FBE Immuno and FBE 3000) or with any other suitable electrophoresis or immunoelectrophoresis chambers.

Description:

The Pharmacia Electrophoresis Power Supply EPS 3500 is a high quality, high precision and safe power supply for electrophoresis applications that require a maximum of 3500 volts. EPS 3500 is primarily designed for the following techniques: ● DNA sequencing ● IEF (Isoelectric focusing) EPS 3500 is also suitable for: ● ● ● ● ● SDS-PAGE (Polyacrylamide Gel Electrophoresis) Native PAGE Agarose electrophoresis Electroblotting DNA pulsed field electrophoresis Electrophoresis separations can be controlled by voltage, current or power. The EPS 3500 automatically switches over the controlling parameter according to programmed limits and conductivity variations in the system. Two electrophoresis units can be connected to the EPS 3500 and run with the same programmed method at one time. Three programs can be saved.

Specifications:

• Output modes: Constant voltage, current or power
• Output voltage: 1 - 600 V in 1 V steps
• Output current: 1 - 400 mA in 1 mA steps
• Output power: 1 - 100 W in 1 W steps
• Program storage: 3 programmed methods
• Time: 1 min – 500 hr
• Volthours: 1 Vhr - 500kVhr
• Power outlets: 2 pairs, recessed 4 mm high voltage
• Operating temperature: 4°-40°C
• Power Consumption: 140 W
• Mains power: 100-120/220-240 VAC, 50-60 Hz
• Dimensions (W x D x H ): 25 x 39 x 10 cm
• Weight: 4.8 kg
• Safety features: Overload/short circuit detection
• Automatic cross-over
• Automatic recovery after power failure

Specification:

• Amperage: 500mA
• Voltage (Maximum): 1200V
• Product Type: Power Supply
• Electrical Requirements: 1200V, 500mA, 300w
• Wattage: 150w

The Power Supply EV265 has a powerful, easy to operate design that is small and compact. Storing of up to 9 methods is possible and allows for data logging of electrophoresis runs of about 100 hours.

Specifications:

• Voltage: 0 – 600 +/- 2%
• Maximum Current: 500 mA
• Maximum Output: 150W
• Timer: 0 -99, 59 h
• Minimum Load Resistor: 30 ohms
• Ambient Temperature: 0 - 40°C
• Dimensions: 24 x 20 x 13 cm
• Weight: 6 kg

Description:

• Compact, benchtop, constant voltage power supply designed for gel electrophoresis. Additionally suitable for Mini-SDS-PAGE and pulse field electrophoresis applications
• Equipped with dual banana output jacks and high-low voltage switch
• 3 digit digital readout, over-current alarm (500mA), check fuse indicator

Specifications:

• Weight: 12 lbs.
• Dimensions: 9” x 6” x 6”
• Power Supply Output: 20 to 250V in 10V increments, max 300 mA (at 150V – 250V), 500 mA (below 150V)

A benchtop power supply used for providing adjustable DC power for electrophoresis applications.  Operates in constant voltage or constant current mode. Programmable run time and LED display of timer, current, and voltage. 

Specifications:

• Power: Operates up to 200V or 2.0A
• Output Voltage: Up to 500V
• Output Current: Up to 500 mA
• Output Power: Up to 250W

Minigel System Features

• Ideal for quick screening
• Uses 7 x 10cm gel tray with two comb positions
• Runs up to 16 samples on one gel with combs supplied
• Provides easy, leak-free casting without tape, grease or seals

Specifications

• Gel Dimension: 7 x 10cm
• Sample Size: 16 samples on one gel
• Buffer volume: 400mL