Used Lab Equipment

Description:

The Thermo Forma Model 4535 Incubator Shaker is a large-capacity environmental shaker that allows for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and enhances the productivity of laboratories with shaking requirements. The Forma 4535 is designed to accommodate a wide variety of flasks, tubes, and other glassware. Program and store up to three user-defined combinations for ease of use and quick parameter recovery.

Specifications:

• Max Speed: 525 RPM
• Shaking Accuracy: ± 1 RPM
• Max Temperature: 60°C
• Temperature Control: ± 0.1°C
• Temperature Uniformity: ± 0.2°C
• Orbital Diameter: 1 inch
• Timer: 5 min to 199.99 hours / hold
• Dimensions (H x W x D): 40.5 x 26 x 45 in
• Power Requirements: 115 V, 60 Hz, 8.6 A

The New Brunswick INNOVA 4000 Series are benchtop gyratory incubator shakers. Offering rigid control of temperature and agitation, the large-capacity INNOVA 4000 shaker is capable of culturing a wide array of organisms in test tubes and flasks up to 2.8 L.

The INNOVA series offers a wide temperature range. The INNOVA Model 4000 provides uniform temperature control in a range up to 60°C, while the high-temperature INNOVA 4080 incubator shaker increases the range to 80°C for added hybridization, adding capabilities for various molecular biology techniques, including hybridization studies, plasmid preps, DNA fingerprinting and more. The optional factory-installed cooling coil is also available for operating at sub-ambient conditions.

The INNOVA 4000 was designed with safety and ease of use in mind. The system includes an automatic cut-out feature of the shaker when the lid is opened to protect the operator. A fail-safe thermostat also turns off heat if temperature high limit is exceeded to protect cultures, and the hydraulic arm eases lid opening and closing.

Equipped with a large capacity blower and tightly constructed chamber, the INNOVA 4000 series incubator shaker has a self-correcting microprocessor feedback control which instantly compensates for changes in temperature. Another superior feature of the INNOVA 4000 include the interchangeable, large-capacity accessory platforms, 18" x 18" (46 x 46 cm) that accept gel trays, culture tubes and flasks to 2.8 L.

Specifications:

• Platform Size: 18 x 18
• Maximum Capacity (250 ml Flasks on Universal Platform): 18
• Capacity & Largest Flask Size on Universal Platform: 5 x 2L
• Orbit Diameter (in) 75
• Temperature Range (C°): Ambient +5 to 60 (4080 is Ambient +5 to 80)
• Digital Display: Yes
• Agitation: 25 to 500 rpm
• Type/Application: Benchtop
• Gassing Manifold: Optional
• Overall dimensions: W x D x H (in) 21 x 27.5 x 19.75
• Weight (lbs): 115

The New Brunswick INNOVA 4000 Series are benchtop gyratory incubator shakers. Offering rigid control of temperature and agitation, the large-capacity INNOVA 4000 shaker is capable of culturing a wide array of organisms in test tubes and flasks up to 2.8 L.

The INNOVA series offers a wide temperature range. The INNOVA Model 4000 provides uniform temperature control in a range up to 60°C, while the high-temperature INNOVA 4080 incubator shaker increases the range to 80°C for added hybridization, adding capabilities for various molecular biology techniques, including hybridization studies, plasmid preps, DNA fingerprinting and more. The optional factory-installed cooling coil is also available for operating at sub-ambient conditions.

The INNOVA 4000 was designed with safety and ease of use in mind. The system includes an automatic cut-out feature of the shaker when the lid is opened to protect the operator. A fail-safe thermostat also turns off heat if temperature high limit is exceeded to protect cultures, and the hydraulic arm eases lid opening and closing.

Equipped with a large capacity blower and tightly constructed chamber, the INNOVA 4000 series incubator shaker has a self-correcting microprocessor feedback control which instantly compensates for changes in temperature. Another superior feature of the INNOVA 4000 include the interchangeable, large-capacity accessory platforms, 18" x 18" (46 x 46 cm) that accept gel trays, culture tubes and flasks to 2.8 L.

Specifications:

• Platform Size: 18 x 18
• Maximum Capacity (250 ml Flasks on Universal Platform): 18
• Capacity & Largest Flask Size on Universal Platform: 5 x 2L
• Orbit Diameter (in)75
• Temperature Range (C°): Ambient +5 to 60 (4080 is Ambient +5 to 80)
• Digital Display: Yes
• Agitation: 25 to 500 rpm
• Type/Application: Benchtop
• Gassing Manifold: Optional
• Overall dimensions: W x D x H (in) 21 x 27.5 x 19.75
• Weight (lbs): 115

Specifications:

• Humidity Control
• Temperature Range: 0°C to 60°C
• Chamber Volume: 29 Cubic Feet / 821.2 Liters
• Temperature Uniforimity: ±0.3°C at 37°C
• Temperature Sensitiviy: ±0.1°C
• Chamber Dimensions (HxWxD):  60” x 31” x 27”
• Exterior Dimensions: (HxWxD):  88.5” x 38” x 32”
• Weight: 1040 LBS
• Capacity: 29 cu. ft. (821.2L)
• Voltage: 208/220V 60 Hz, 15.0A
• 4-wire power cord (including ground)
• NEMA 14-20P plug
• 6 solid stainless-steel shelves
• Exterior D x W x H: 32 x 38 x 88.5 in. (81.3 x 96.5 x 224.8cm)
• Interior D x W x H: 27 x 31 x 60 in. (68.6 x 78.7 x 152.4cm)

Broad Range of Features and Controls

• Wide temperature range of 0° to 60°C enhances the flexibility of the unit
• Relative humidity control via steam generator from above ambient to 95% at 37°C†
• Sophisticated digital controls
• Programmable ramp and soak cycles for temperature and RH†
• Durable cabinets feature true laminar airflow through side plenums for extremely tight uniformity
• Phenolic-coated evaporator for use in applications that create corrosive byproducts
• Manual control of defrost and refrigeration cycles
• Visible/audible safety alarms alert to over- and undertemperature conditions, deviation of humidity from set parameters (except Model 3920)

Durable Construction

• Cold-rolled steel, powder-coated cabinet
• 0 in. (5.1cm) thick, CFC-free, foamed-in-place polyurethane insulation
• Stainless-steel interior
• Solid stainless-steel adjustable shelves
• Directed horizontal airflow system for excellent uniformity
• Locking swivel casters ensure easy mobility during installation and cleaning
• Leveling feet provide stability and added safety in the lab

These accurate and reliable chambers are ideal for long-term high temperature and relative humidity (RH) testing. Designed to provide a wide range of environments, these units are suitable for both industrial and biotechnology specification testing, specifically continuous-duty projects.  All models are equipped with a gentle horizontal air flow system, which ensures stable, top-to-bottom temperature and RH uniformity. Low temperature models 9005L and 9010L feature CFC-free refrigerant. Relative humidity range may vary depending on temperature set point.  Digitally set, microprocessor temperature and humidity controllers allow precise setting with direct digital read-out in degrees and percentage RH.  The over-temperature safety control prevents possible damage to samples or equipment. A vapor generator compresses moisture and injects it into the chamber to provide controlled humidification. Automatic water level control maintains liquid level in humidity reservoir. Pressure coupling allows for easy hook-up of in-line plumbing or a carboy of distilled water. All units feature interior drain.

Specifications:

• Temp range: 40 to 70°C
• Capacity: 9 cu ft.
• Humidity range: 5% above ambient to 95% RH.
• Inside dimensions: 30"W x 20"D x 30"H.
• Interior: Stainless steel.
• Shelves: 2 shelves

Designed to culture dozens, and even hundreds, of samples on up to four independently controlled shakers. Powerful heater and fan provide rapid heat-up capability and temperature uniformity, and humidity control that minimizes evaporation.

Specifications:

• Speed: 25 to 400 RPM
• Temperature Range: 20°C below ambient to 60°C
• Temperature Gradient: ±0.5°C
• Humidity Control: 90% between 37°C and 45°C, 85% between 25°C and 36°C
• Dimensions: 55” x 30.5” x 78.5” in (W x D x H)
• Orbit Diameter: 1 or 2 in

Description:

Incubating microplate shakers are ideal for cell cultures, hybridizations, and suspensions.

• Optimized for shaking microplates or microtubes
• Digital display for speed, temperature, and time
• Microprocessor control
• Timer with audible alarm

Microprocessor PID temperature controller maintains precise temperature control from 5° above ambient to 65°C (149°F). The triple eccentric drive features permanently lubricated ball bearings. The maintenance-free, brushless DC motor provides a long service life. A Lexan® polycarbonate lid permits viewing of samples from all sides without disturbing internal temperature. Platform dimensions: 19.7Wx27.9Dcm (73/4x11"). Optional microtube rack attaches to platform to hold 1.5 mL or 2 mL microtubes and has a capacity of 70 tubes. Units with opaque lid are designed for light sensitive samples. Easy-to-use controls allow user to adjust temperatures in 1°C increments. Built-in timer with LED display will show elapsed time, or, when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm sounds when time reaches zero. Holds four microplates or two microtube racks.

The Orbi-Shaker XL offers flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 inch platform and a powerful, beltless motor drive, the Orbi-Shaker XL is capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications.

Specification:

• Speed Range: 30 to 300 rpm
• Speed Increment: 1 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 2L or 9 x 1L
• Max. Load: 65 lbs
• Platform Dimensions: 17.8" x 17.8"
• Timer: 1 min. to 48 hrs/continuous
• Weight: 65 lbs
• Dimensions: 18.5" x 21.25" x 5"

The Orbi-Shaker MP. is designed with a 3mm mixing orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use springs, clamps or tools. A digital microprocessor ensures accurate speed control over the brushless, maintenance free motor drive and both speed and time can be viewed simultaneously on the large LED display.

Specifications:

• Speed: 200 to 1500 rpm
• Orbit: 3mm
• Max. Capacity: Up to 4 microplates
• Temp. Range: +4 to +65 C
• Dimensions: 11" x 10.7" x 4.5"
• Timer: 1 min. to 99 hours or continuous
• Weight: 12 lbs

The powerful Orbi-Shaker is capable of mixing a 14lb load capacity up to speeds as high as 300 rpm. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, Petri dishes and staining trays.

Specifications:

• Dimensions (W x D x H): 11 x 13 x 3 in. (279 x 330 x 76 mm)
• Weight: 25 lbs. (11.5 kg)
• Speed Range: 30 to 300 rpm, variable
• Speed Increment: 1 rpm
• Orbit: circular 19 mm (0.75 in.)
• Timer: 1 minute to 48 hours, continuous
• Operating Temperature: 4°C to 65°C
• Maximum Weight Capacity: 14 lbs. (6 kg)
• Electrical: 115 V, 50-60 Hz, 600 W

The Orbi-Shaker JR. is a personal sized orbital shaker including a 9.5x8" non-slip rubber platform, ideal for tissue culture flasks, Petri dishes and staining trays. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. Mixing speed and run time are displayed on the large LED control panel located on the front side of the unit. The integral microprocessor includes a constant monitoring system that ensures accuracy through the duration of the program. Sophisticated over-temperature and over-speed controls ensure long life, safety and sample integrity.

Specification:

• Speed: Variable, 50 to 300 rpm
• Orbit: 19 mm
• Max. Capacity: 4 x 1L (9 lbs / 4 kg)
• Speed Increment: 10 rpm
• Platform Dimensions: 9.5 x 8 in./ 24 x 20 cm
• Operating Temp. Range: +4 to +65°C
• Dimensions (W x D x H): 13.1 x 11.74 x 4.7 in. (33 x 30 x 12 cm)
• Weight: 12 lbs (5.5kg)
• Electrical: Universal Voltage, 100-240V, 50-60Hz 250W

The Orbi-Shaker BT4000 is designed to fit and maximize capacity in most CO2 incubators. Adjust settings without disrupting the CO2 environment by remotely controlling the machine.

Specifications:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max Capacity: 5 x 1 L
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12"
• Cord Length: 605"
• Operating Temp: 0° to +65°C
• Dimensions: 11 x 13 x 3"
• Weight: 25 lbs
• Electrical: 120V or 230V

The new Orbi-Shaker CO2 series is designed for shaking, mixing aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 1L (14 lbs / 6 kg)
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12 in./ 33 x 30 cm (Included)
• Cord Length: 60.5 in. / 154 cm
• Operating Temp. Range: 0° to +65°C
• Dimensions (W x D x H): 11 x 13 x 3 in. / 28 x 33x 7.5 cm
• Weight: 25 lbs (11.25kg)
• Electrical: 120V or 230V, 50-60Hz 600W

Specifications:

• Capacity : 5 x 2 L Capacity & Largest Flask Size on Universal Platform
• Volts: 120V 50/60 hz
• Temp Range: Ambient +7 to 60