Used Lab Equipment

Features:

Lab-Line's Floor Model Environmental Shakers combine hydraulic temperature control and dependable mechanical timing with variable shaking speed in a controlled environment chamber. They are designed for growing and maintaining culture and microorganisms in ambient air or inert gas environments.
Provides uniform shaking motion in a controlled environment, features a triple eccentric drive. The lubricated bearings are permanently sealed for continuous use.

Specifications:

• Dimensions OA (cm): 56Dx86Wx37H cm
• Power requirements: 120VAC 60Hz 800W
• Operating temperature: Amb +5 to +60oC
• Load Capacity: 34 kg
• Electrical: 120V / 50/60Hz / 6.67A
• Power: 800W
• Temperature range: amb. +5 to 60°C
• Temperature control at 20°C (in flask): ±0.1°C
• Temperature uniformity at 20°C (in flask): ±0.5°C
• Chamber dimensions (W x H x D): 34 x 14.5 x 22 in. (86 x 37 x 56 cm)
• Overall dimensions (W x H x D): 43.5 x 33 x 30.5 in. (110 x 84 x 77 cm)

The New Brunswick G-25 Shaker Incubator is electronically controlled and built for continuous operation, providing many years of 24/7 service for incubation with shaking fermentation. The rugged G-25 shaker incubator offers dual thermostat control and monitoring. Should the control thermostat fail, a safety feature prevents overheating. A temperature rise over 2°C will also cause the safety to take over, which will be signaled by the lit safety pilot indicator

Specifications:

• External Dimensions (Lid Closed): 22 x 45.5 x 30.5 in
• Chamber Dimensions: 22 x 34.5 x 12.5 in
• Power Requirements: 120VAC, 60Hzm 10A
• Speed/Stroke: 40 – 400 rpm at 1” circle
• Operating Temperature: Ambient to 60 °C ± 0.5
• Capacity: 2L
• Speed Range: 40 – 400 rpm, 30-285 strokes/min
• Net Weight: 325 lbs

The New Brunswick INNOVA 4200 Series are benchtop gyratory incubator shakers. Designed for versatility, these shakers are multipurpose instruments. Fitted with a front-opening door, the INNOVA 4200 shakers can be used on or under the bench, or floor-stacked for space savings.

Specifications:

• Accessory Platform Size: 18 x 18 in
• Maximum Capacity: 18 x 250 mL
• Capacity and Largest Flask Size: 2 x 6 L
• Orbit Diameter:75 in
• Temperature Range: Ambient +5 to 80 °C
• Agitation: 25 – 400 rpm
• Overall Dimensions: 4 x 28.7 x 36.4
• Weight: 270 lbs

Features:

• Microprocessor controlled gyrotory Incubator shaker with triple eccentric drive operating in a speed range of 25-500 rpm in a 1” (2.54cm) orbit
• Temperatures of between 5° C above ambient to 60° C.
• Accommodates flasks up to 6 liters on a 18x30” (46x76cm) platform.
• Equipped with foot pedal lid lift assist.

Specifications:

• Dimensions (in): c. 31Dx39Wx47H
• Power requirements: 120 60Hz

Specifications:

• Platform Size: 18 x 30
• Maximum Capacity  (250 ml flasks on universal platform): 48
• Capacity & Largest Flask Size on Universal Platform: 6 x 4L
• Temperature Range (C°): A +5 to 80
• Agitation (rpm): 25 to 400
• Type/Application: Floor
• Refrigeration: No
• Multi-Step Programming: No
• Photosynthetic Lights: No
• Overall dimensions W x D x H (in): 50 x 33 x 27
• Weight (lbs): 440 

Specifications:

• Speed Range: 25 to 400 ±1 rpm
• Temperature Range (Metric): Ambient+10° to 60°C
• Orbit:5cm (1 in.)
• Capacity: Twelve 2L Erlenmeyer flasks
• Control: Digital
• Load Bearing Capacity: 71 lb. (32kg)
• Motor Type: DC brushless
• Temperature Accuracy: ±0.15°C at 37°C
• Timer: Continuous or timed from 1 min. up to 199 hr. and 59 min
• Cabinet: Heavy-gauge cold-rolled steel
• Chamber Material: Type 304 stainless steel
• Display LED: Time, Speed, Temperature include run and setpoints
• Dimensions (L x W x H) Exterior:3 x 46.5 x 25 in. (84.6 x 118.1 x 63.5cm)
• Dimensions (D x W x H) Interior:8 x 33.4 x 11.8 in. (60.5 x 84.6 x 30cm)
• Electrical Requirements: 120V 60Hz

Specifications:

• Minimum dimensions (W x D x H): 800 x 623 x 700 mm (Individual device on rubber feet, without outlet nozzle)
• Maximum capacity: 2 x 5 L Erlenmeyer flasks
• Maximum expansion: Stackable, up to 2 units
• Speed ranges: 20 - 400 min-1
• Shaking throw: 25 mm
• Temperature range: 5°C above RT up to 65°C (without cooling system)
• Standard parameters: Temperature and speed

The Multitron Standard is the shortest route to excellent value from the Multitron family for the essential tasks. The advantages include user-friendliness and optimal use of space provided by the modular structure and the downwards opening door. The integrated microprocessor offers flexible controllability, including a timer-programming. Includes CO2, humidity, and refrigeration.

Specifications:

• Motion: orbital
• Shaking speed: 20 up to 400 rpm
• Throw: 25 or 50 mm
• Accuracy: 1% at max. revolutions
• Temperature range: 5 °C above RT up to 65 °C -15 °C below RT up to 65 °C
• Precision: ± 0,2 °C (Pt-100 probe)
• Air circulation: 360 m3/h
• Heating capacity: 700 W
• Cooling capacity (if fitted): 900 W
• Interface: RS-232, bi-directional
• Power supply: 115/230 V ±10%, 50/60 Hz
• Relative humidity max.: With / without cooling: 85% rH

Description:

Incubating microplate shakers are ideal for cell cultures, hybridizations, and suspensions.

• Optimized for shaking microplates or microtubes
• Digital display for speed, temperature, and time
• Microprocessor control
• Timer with audible alarm

Microprocessor PID temperature controller maintains precise temperature control from 5° above ambient to 65°C (149°F). The triple eccentric drive features permanently lubricated ball bearings. The maintenance-free, brushless DC motor provides a long service life. A Lexan® polycarbonate lid permits viewing of samples from all sides without disturbing internal temperature. Platform dimensions: 19.7Wx27.9Dcm (73/4x11"). Optional microtube rack attaches to platform to hold 1.5 mL or 2 mL microtubes and has a capacity of 70 tubes. Units with opaque lid are designed for light sensitive samples. Easy-to-use controls allow user to adjust temperatures in 1°C increments. Built-in timer with LED display will show elapsed time, or, when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm sounds when time reaches zero. Holds four microplates or two microtube racks.

The Orbi-Shaker XL offers flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 inch platform and a powerful, beltless motor drive, the Orbi-Shaker XL is capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications.

Specification:

• Speed Range: 30 to 300 rpm
• Speed Increment: 1 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 2L or 9 x 1L
• Max. Load: 65 lbs
• Platform Dimensions: 17.8" x 17.8"
• Timer: 1 min. to 48 hrs/continuous
• Weight: 65 lbs
• Dimensions: 18.5" x 21.25" x 5"

The Orbi-Shaker MP. is designed with a 3mm mixing orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use springs, clamps or tools. A digital microprocessor ensures accurate speed control over the brushless, maintenance free motor drive and both speed and time can be viewed simultaneously on the large LED display.

Specifications:

• Speed: 200 to 1500 rpm
• Orbit: 3mm
• Max. Capacity: Up to 4 microplates
• Temp. Range: +4 to +65 C
• Dimensions: 11" x 10.7" x 4.5"
• Timer: 1 min. to 99 hours or continuous
• Weight: 12 lbs

The powerful Orbi-Shaker is capable of mixing a 14lb load capacity up to speeds as high as 300 rpm. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, Petri dishes and staining trays.

Specifications:

• Dimensions (W x D x H): 11 x 13 x 3 in. (279 x 330 x 76 mm)
• Weight: 25 lbs. (11.5 kg)
• Speed Range: 30 to 300 rpm, variable
• Speed Increment: 1 rpm
• Orbit: circular 19 mm (0.75 in.)
• Timer: 1 minute to 48 hours, continuous
• Operating Temperature: 4°C to 65°C
• Maximum Weight Capacity: 14 lbs. (6 kg)
• Electrical: 115 V, 50-60 Hz, 600 W

The Orbi-Shaker JR. is a personal sized orbital shaker including a 9.5x8" non-slip rubber platform, ideal for tissue culture flasks, Petri dishes and staining trays. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. Mixing speed and run time are displayed on the large LED control panel located on the front side of the unit. The integral microprocessor includes a constant monitoring system that ensures accuracy through the duration of the program. Sophisticated over-temperature and over-speed controls ensure long life, safety and sample integrity.

Specification:

• Speed: Variable, 50 to 300 rpm
• Orbit: 19 mm
• Max. Capacity: 4 x 1L (9 lbs / 4 kg)
• Speed Increment: 10 rpm
• Platform Dimensions: 9.5 x 8 in./ 24 x 20 cm
• Operating Temp. Range: +4 to +65°C
• Dimensions (W x D x H): 13.1 x 11.74 x 4.7 in. (33 x 30 x 12 cm)
• Weight: 12 lbs (5.5kg)
• Electrical: Universal Voltage, 100-240V, 50-60Hz 250W

The Orbi-Shaker BT4000 is designed to fit and maximize capacity in most CO2 incubators. Adjust settings without disrupting the CO2 environment by remotely controlling the machine.

Specifications:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max Capacity: 5 x 1 L
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12"
• Cord Length: 605"
• Operating Temp: 0° to +65°C
• Dimensions: 11 x 13 x 3"
• Weight: 25 lbs
• Electrical: 120V or 230V

The new Orbi-Shaker CO2 series is designed for shaking, mixing aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 1L (14 lbs / 6 kg)
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12 in./ 33 x 30 cm (Included)
• Cord Length: 60.5 in. / 154 cm
• Operating Temp. Range: 0° to +65°C
• Dimensions (W x D x H): 11 x 13 x 3 in. / 28 x 33x 7.5 cm
• Weight: 25 lbs (11.25kg)
• Electrical: 120V or 230V, 50-60Hz 600W