Used Lab Equipment

Specifications:

• Platform: Floor Prep
• Maximum Speed: 90,000 rpm
• BioSafe: No
• Acceleration: 10 profiles
• Deceleration: 11 deceleration profiles
• Speed Control: ± 2 rpm of set speed (above 1,000 rpm)
• Timed Run: 999 hrs, 59 mins (including hold runs)
• Max Capacity Volume Range: - 1500 mL
• Refrigeration System: Solid state (thermoelectric temperature control system with forced air; no coolant; no CFCs/ODCs)
• Drive Type Cooling: Quiet drive technology / air cooled
• Temperature Range(s): Set temperature range: 0 to 40°C in 1°C increments, Ambient temperature range: 10° to 35°C
• Zonal Capability: Yes
• Display: Full-color LCD touch screen
• Weight: 485 kg / 1069.2 lb
• Width: 94 cm / 37 in
• Depth:1 cm / 26.8 in
• Height:7 cm / 49.5 in
• Humidity Restrictions: <80% at <35°C (non-condensing)
• Power Requirements: 200-240 VAC, 50/60 Hz

The Sorvall WX Ultra Series can perform a wide range of separations, offering comprehensive control and set-up options to meet your precise application needs. The innovative UltraSecur technology significantly improves safety and efficiency, while stand-alone run simulation software minimizes the time you spend developing new protocols.

Outstanding Control with UltraSecure

• Sorvall WX Ultra Series features the unique UltraSecure system – a set of embedded software features that enable better control of multi-user access to the centrifuge, greater convenience and improved safety:

Run scheduler

• allows you to schedule runs at your convenience.

Rotor life management

• Tracks rotor usage and alerts you when rotors need to be serviced or replaced.

Intuitive Color Touch Screen Interface

• An intuitive, color touch-screen interface makes protocol set-up and storage on the Sorvall WX Ultra Series straightforward, even for inexperienced users.
• The large LCD screen clearly displays set and run conditions for easy, at-a-glance monitoring.
• The keypad is used to enter the operator’s ID code and specific run parameters, including speed, time and temperature.

Specifications:

• Speed: 80000rpm
• Rotor Capacity: 6 x 250mL
• Hertz: 50/60Hz
• Profile (Acceleration/Braking): 10/11, brake off 10/11, brake off
• Phase: single
• Voltage: 208 to 240V
• Ambient Temperature Operating Range: 10 to 35°C
• Control Speed Accuracy: ±10rpm
• Height (English) Exterior: 4/33.4 in. height to top of deck
• Height (Metric) Exterior: 100/85cm height to top of deck
• Length (English) Exterior: 2 in.
• Length (Metric) Exterior: 69cm
• Memory: 20, each with step runs
• Noise Level: 53dBA
• Refrigerator System Type: Solid-state thermoelectric (CFC free)
• Regulatory Standards: cCSAus, CE
• Temperature Range (Metric): 0° to 40°C
• Width (English) Exterior: 1 in.
• Width (Metric) Exterior: 79cm
• Description: Sorvall WX80 Ultracentrifuge
• Form Factor: Floor Model
• Heat Output (Metric): <1kWh
• Item Description: Sorvall WX80 Ultracentrifuge
• Weight (English): 8 lb.
• Weight (Metric): 400kg
• Certifications/Compliance: CE and cCSAus certified
• Refrigerated: Yes
• Electrical Requirements: 208 to 240V 50/60Hz

Specification:

• Maximum Speed: 90,000 rpm
• Maximum RCF: 692,150 (with T-890 rotor)
• Speed control accuracy: +/-10 rpm
• Temperature set range: 0C - 40C
• Temperature control accuracy: +/-0.5C
• Timer: 0 to 99 hr, 59 min or HOLD
• Step run: 9 single step runs
• Diagnostic indicators: up to 2 steps
• Vacuum level indication: 15
• 3 levels shown by LED Digital readout and 3 levels shown by LED
• Noise Level: 53 dB

Dimensions:

• Chamber Dimensions: 90 x 90mm
• Width: 31"
• Depth: 27"
• Height: 40"

The Sorvall Discovery 90 Ultra Centrifuge features simple keypad and large LCD display for easy set-up of routine spins. A Dual display of SET and RUN conditions - verify performance at a glance. 

Specifications:

• Speed Control Accuracy: +/- 10 rpm
• Temperature Set Range: 0°C – 40°C
• Step Run: 9 single step runs
• Vacuum Level Indication: 15
• Noise Level: 53 dB
• Chamber Dimensions: 90 x 90 mm
• Dimensions: 27 x 31 x 40 in

Specifications:

• Maximum Speed: 100,000RPM
• Up to 802000 x g

Features:

• The Optima XL ultracentrifuge is used to generate centrifugal forces for the separation of particles. The XL-100K spins with a maximum speeds of 100 000 rpm. Classified “S,” it can be used with all currently manufactured Beckman Coulter preparative rotors; it is also designed for zonal and continuous flow operation.
• The Optima XL is microprocessor-controlled, providing interactive, menudriven operation. Software functions assist with run preparation and optimizing the efficiency of separations. The Optima XL has an extensive database of rotor specifications and catalog of available Beckman Coulter rotors, the ability to perform common centrifugation-related calculations, and the ESP™ Efficient Sedimentation Program, which simulates the formation of the gradient and separation of sample components in a wide selection of rotors.