Used Lab Equipment

Features:

• BD CSampler- 96 well plate and 24 tube rack automated sampler for BD Accuri C6 flow cytometer  
• Blue and red laser
• Two light scatter detectors
• Optical filters such as FITC, PE, PerCP and APC
• A compact optical design, fixed alignment, and pre-optimized detector settings make the system easier to use
• Optional filters and the Selectable Laser Module expand the available fluorochrome combinations
• Compact system and portable weight (13.6 Kg)
• Intuitive interface of the software
• Measures: 11 x 14.75 x 16.5 inches (H x W x D) (27.9 x 37.5 x 41.9 cm)

Single Laser Configuration

Includes Computer Loaded with Cytosoft Software

The guava easyCyte flow cytometry systems are cost-effective, easy to use and deliver complete and comprehensive cell analysis- right on your benchtop. The culmination of over a decade of flow cytometry expertise, these instruments consume less sample, generate less waste and are easier to use and maintain than traditional flow cytometers—all while providing the analytical power you need to expand your research horizons.

Features:

• Blue Laser
• Forward and Side Scatter
• Tube Sampling
• Automated 96 Well Micrplate Sampling
• Small Sample Size (<20 μL)
• Minimal waste (<50 mL per day)
• Detectors
  • Green
  • Yellow
  • Red

Fluidics Specifications:

• Flow Cell Dimension: Standard square capillary with ID of 100 µm
• Pump: Positive displacement
• Sheath Fluid: None
• Sample Flow Rate: 7µL/min to 72 µL/min
• Waste Generation: typically <40mL in 8 hours of continuous use
• Dead Volume: 50 µL (for 96-well microplate)
• Sample Requirement: as few as 2,000 cells/test; typically 25,000 – 100,000 cells
• Cell Size: 1-60 µm
• Typical # of Cells/Protocol: 1,000 – 10,000 cells/test

The Millipore Guava EasyCyte HT offers sample handling formats for both tubes and 96-well plates, direct sampling using patented microcapillary system, and a user-friendly, versatile software. EasyCyte instruments are also compatible with many fluorochromes and fluorescent reagents.

Specifications:

• Operating temperature: 16°–35°C (60°–95°F)
• Operating humidity: 10–90% relative humidity (non-condensing)
• Power: 100–240 VAC, 50/60 Hz, 120W
• Dimensions: 21 x 24 x 12 inches
• Weight: 71lb
• Detection: 5 colors including forward scatter
• Laser: blue 488 nm (50mW)
• Flow cell dimension: standard square capillary with ID of 100 µm
• Pump: 7 µL/min to 36 µL/min
• Sample flow rate: positive displacement
• Waste and cleaning vials: 30-mL glass vial with screw top
• Waste generation: typically <40 mL in 8 hours of continuous use
• Dead volume: 50 µL (for 96-well microplate); 75 µL (for 0.5-mL microcentrifuge tubes)
• Sample concentration: final particle concentration of 104 to 5 x 105 particles/ml
• Sample requirement: for accurate results (up to 2.5 x 106 beads/mL for the RapidQuant Assay) as few as 2,000 cells/test; typically 25,000-100,000 cells/test, depending on the assay
• Data management: Output data file formats - (1) binary data storage in FCS 3.0 format; (2) spreadsheet results file in CSV format

Description:

Built on more than 25 years of BD experience and leadership in flow cytometry and multicolor analysis, the BD FACSCanto™ II system is an easy-to-use benchtop analyzer that delivers proven performance, accuracy, and high-quality results. The BD FACSCanto II can be configured with two or three lasers to detect up to eight colors. It features many innovations, including a true fixed alignment flow cell to minimize startup time and improve reproducibility. The optical system maximizes signal detection and increases sensitivity and resolution for each color in a multicolor assay. These and other capabilities make the BD FACSCanto II ideal for today’s busy clinical lab, providing a high degree of automation and quality control. With optimal reproducibility, the BD FACSCanto II system reduces hands-on technician time and costs associated with repeat testing.

Specifications:

• Carryover: ≤0.1%
• Sample Injection: Direct into flow cell
• Max Particle Size: 50 μm
• Sample Flow Rate, Min: 10 μL/min
• Sample Flow Rate, Max: 120 μL/min
• Sample Acquisition Rate: 10,000 events/second, 6 compensated fluorescence parameters and 2 scatter parameters
• Sample Dead Volume: 30 μL
• Sheath Consumption: 1.10 L/h normal operation; <1 mL/h standby

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

Includes:

• Computer w/ FacsDiva Software

• Fluids Cart
• 2 laser, Blue(488) and Red (633)
• Laser
• 6 PMTs unit and side scatter

• All Necessary Cables
• Manuals

Optics Specifications:

• Lasers
  • Air-cooled:
  • 488-nm solid state, 20-mW laser output
  • 633-nm HeNe, 17-mW laser output
• Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
• Optical Alignment Procedure: Fixed, no operator alignment required
• Flow Cell: 180 x 430-μm rectangular quartz flow cell
• Collection Optics: Optical-gel coupled 1.2 NA lens
• FSC Resolution: 0 μm
• SSC Resolution: 5 μm
• Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
• FSC Detector: Photodiode with 488/10 BP
• SSC Detector: PMT with 488/10 BP
• Fluorescence Detectors: 6 PMTs in 4-2 standard configuration
• Blue Laser Dyes
  • FITC, PE, PerCP or PerCP-Cy™5.5,
  • PE-Cy7 (525, 575, 678 or 695, 785 nm)
• Red Laser Dyes: APC, APC-Cy7 (660, 785 nm)
• Detector Bands
  • Blue Laser: 530/30; 585/42; >670; 780/60 nm
  • Red Laser: 660/20; 780/60 nm
• Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

Includes:

• Computer w/ FacsDiva Software
• Fluids Cart
• 2 laser, Blue(488) and Red (633)
• 3 PMTs in 4-2 configuration w/ side scatter
• All Necessary Cables
• Manuals

Optics

Lasers

• Air-cooled
• 488-nm solid state, 20-mW laser output
• 633-nm HeNe, 17-mW laser output
• Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
• Optical Alignment Procedure: Fixed, no operator alignment required
• Flow Cell: 180 x 430-μm rectangular quartz flow cell
• Collection Optics: Optical-gel coupled 1.2 NA lens
• FSC Resolution: 1.0 μm
• SSC Resolution: 0.5 μm
• Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
• FSC Detector: Photodiode with 488/10 BP
• SSC Detector: PMT with 488/10 BP

• Fluorescence Detectors: 6 PMTs in 4-2 configuration w/ side scatter

Description:

An FS4700 series fan box consists of a motorized impeller installed in a housing with a variable speed controller. The housing is designed to fit over a HEPA filter on the inlet side and is equipped on the discharge side with a single outlet.

The Tali Image-Based Cytometer is a 3-channel (bright field, green fluorescence, red fluorescence) benchtop assay platform that uses state-of-the-art optics and image analysis to perform assays for cells in suspension, including GFP and RFP expression, apoptosis, cell viability (live, dead, and total cells), cell cycle, and cell counting assays. It is compatible with a wide variety of eukaryotic cells. In addition to the bright field channel, the Tali® Image-Based Cytometer features two fluorescent channels (green and red), enabling it to simultaneously count green or red fluorescent stains, as well as cells expressing GFP and RFP.

Specification:

• Instrument type: Benchtop cell counter and suspension cell-based assay platform
• Dimensions (W x D x H): 11.5 x 17.5 x 11.5 in.
• Weight: 19.4 lbs
• Operating power: 100–240 VAC, 2.5 A, 120 V
• Frequency: 50/60 Hz
• Electrical input: 12 VDC, 13 A
• Installation site: Indoor use only, Class A environments; pollution degree 2
• Operating temperature: 10 - 40°C
• Operating humidity: < 80% (non-condensing)
• Processing time: 10 seconds to 2 minutes, depending on the number of fields captured
• Sample concentration range: 1 x 10^5 - 1 x 10^7 cells / mL
• Particle/cell diameter range: 5-60 µm
• Required sample volume: 25 µL
• Firmware: Tali Image-Based Cytometer Firmware
• USB drive: 4 Gigabyte
• Optics: 3 channels (bright field, green fluorescence, red fluorescence)
• Excitation: Green channel LED (458 ± 20 nm), Red channel LED (530 ± 20 nm)
• Green channel filter: 466/40 EX, 495 LP Di, 525/50 EM
• Red channel filter: 543/22 EX, 580 LP Di, 585 LP EM
• Camera: 1.3 Mega pixels, 4x objective, 4x or 16x digital zoom

VWR 1601 Horizontal Air Flow Cleanroom Oven

Specifictions:

• Chamber Dimensions: 16 x 19 x 19
• Capacity: 3.7 cu ft
• Temperature Range: 40° to 200°C
• 2 shelves

2 ft Purifier Vertical Clean Bench

Specifications:

• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Disposable prefilter
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions
• Two utility ports with iris openings and plugs
• ETL Listing (115 volt, 60 Hz models)
• One year warranty on parts and service

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 31 1/2 ’’ x 24 2/3 ’’x 45 3/4 ’’ / 53’’
• Internal Dimensions (W x D x H): 30 1/8 ’’ x 21 1/2 ’ x 34’’
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 1
• Processed Air Flow: 1P: 265 m3 /h, 1P1C: 164 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 70 W
• Amperage absorbed: 0.26 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 39 3/8 ’’x 24 3/4 ’’x 45 3/4 ’’/ 53’’
• Internal Dimensions: (W x D x H): 38’’x 21 1/2 ’’x 34’'
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 1
• Processed Air Flow: 1P: 265 m3 /h, 1P1C: 164 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 70 W
• Amperage absorbed: 0.26 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 50 1/4 ’’x 31 1/2 ’’x 51 3/4 ’’ / 59 7/8 ’’
• Internal Dimensions: (W x D x H): 48 7/8 ’’x 26 1/4 ’’x 41”
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 3
• Processed Air Flow: 1P: 768 m3 /h, 1P1C: 492 m3 /h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 191 W
• Amperage absorbed: 0.72 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables

Features:

Used for non-pathogenic cell cultures, In-vitro cultures, Microbiology (Non-pathogenic), and Homeopathic preparations in pharmacies.

Specifications:

• External Dimensions (W x D x H): 71’’ x 31 1/2 ’’x 51 3/4 ’’ / 59 7/8 ’’
• Internal Dimensions: (W x D x H): 69 1/2 ’’x 26 1/4 ’’x  41’’
• Metallic Parts: Anti-corrosion steel coated in 100% polyester
• Side and Front Panels: High optical purity, colourless and transparent acrylic.
  Inert to most aggressive chemicals.
• Filtration Module: Injected polypropylene
• Number of Fans (IP44): 4
• Processed Air Flow 1P: 1024 m3/h, 1P1C: 656 m3/h
• Voltage / Frequency: 90-264 V / 50-60Hz
• Total power consumption including electricity for the lights: 261 W
• Amperage absorbed: 0.98 A
• Air velocity at openings: 0.3 m/s
• Flow Monitor: Permanent ventilation control device
• Energy Ports: For the passage of cables
• Internal Lightning: Compact tubular fluorescent lightning - 18 Watts - 500 Lux - IP67
• Energy Ports: For the passage of cables