Used Lab Equipment

Features:

A line of economical drying ovens with a wide temperature range, precise and reliable course of simple drying and heating processes. The line ECOCELL is characterized by a noiseless run and a fine air streaming within the useful space.

Specifications:

• Dimensions: 790 mm x diameter of the air branch outer/inner 52/49 mm x 760 mm
• Tray storage area: 520 x 485 mm
• Racks: 19 max
• Maximum weight per tray: 30kg
• Maximum weight inside the oven: 100kg
• Working temperature (beginning of the regulation): from 5 °C above ambient temp. to:250 °C
• Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door: time variation cca (±)<= 1 °C, space deviation cca (±) % of the reached temperature 2,5 %
• Time required to reach 250 °C with closed air flap and voltage 230 V: 85 min
• Heat emission at 250 °C: 1940 W
• Air exchange speed at 150 °C: 4 per hour
• Electricity - mains 50/60 Hz: max. power input 3,6 kW
• Nominal voltage: 400/3N V
• Current: 7,8 A
• Chamber volume: 404-liter
• Working temperature: from +5°C over ambient temperature up to 250/300°C
• Natural fine air flow in the chamber, noiseless operation
• High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry
• High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
• Standard model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features include:
• Ability to store 3 separate user-programmed cycles
• RS 232 interface for printer or PC communication
• Delayed start and stop function
• Time range up to 99 hours and 59 minutes
• Digital temperature readout
• User-friendly interface
• 304 stainless steel chamber
• Working temperature from 5°C over ambient to 250°C (300°C as option)
• 5” of insulation for low heat radiation
• Natural low velocity air flow
• Easy open door latching system
• Attractive look and design
• Removable air distribution plates (no tools required)
• Two internal wire shelves included

Convincingly cost saving laboratory dryer with a 55-liter chamber volume. Standard model with a Fuzzy-Logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display. Wide range of optional equipment and accessories and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (55 l), depth (390 mm), width (400 mm), height (350 mm)
• External dimensions: depth (640 mm), diameter of the air branch outer/inner (52/49 mm), width (620 mm), height (680 (N) mm)
• Weight: 66 kg (gross)
• Heat emission at 250 °C: 590 W
• Air exchange speed at 250 °C: 8 per hour
• Working Temperature (from 5°C ambient temp): 250 °C

Features:

A line of economical drying ovens with a wide temperature range, precise and reliable course of simple drying and heating processes. The line ECOCELL is characterized by a noiseless run and a fine air streaming within the useful space.

Specifications:

• Dimensions: 640 mm x diameter of the air branch outer/inner 52/49mm x 620 mm
• Tray storage area: 380 x 335 mm
• Racks: 4 max
• Maximum weight per tray: 20kg
• Maximum weight inside the oven: 50kg
• Working temperature (beginning of the regulation): from 5 °C above ambient temp. to:250 °C
• Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door: time variation cca (±)0,3 °C, space deviation cca (±) % of the reached temperature 2 %
• Time required to reach 250 °C with closed air flap and voltage 230 V: 59 min
• Heat emission at 250 °C: 590 W
• Air exchange speed at 150 °C: 8 per hour
• Electricity - mains 50/60 Hz: max. power input 1,2 kW
• Nominal voltage: 230 V
• Current: 5,2 A
• Chamber volume: 55-liter
• Working temperature: from +5°C over ambient temperature up to 250/300°C
• Natural fine air flow in the chamber, noiseless operation
• High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry
• High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
• Standard model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features include:
• Ability to store 3 separate user-programmed cycles
• RS 232 interface for printer or PC communication
• Delayed start and stop function
• Time range up to 99 hours and 59 minutes
• Digital temperature readout
• User-friendly interface
• 304 stainless steel chamber
• Working temperature from 5°C over ambient to 250°C (300°C as option)
• 5” of insulation for low heat radiation
• Natural low velocity air flow
• Easy open door latching system
• Attractive look and design
• Removable air distribution plates (no tools required)
• Two internal wire shelves included

Convincingly cost saving laboratory dryer with a 707-liter chamber volume. High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry. High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening.

Specifications:

• Interior of stainless steel material: volume (22 l), depth (320 mm), width (240 mm), height (295 mm)
• External dimensions: depth (580 mm), diameter of the air branch outer/inner (52/49 mm), width (406 mm), height (604 (N) mm)
• Weight: 36 kg (gross)
• Heat emission at 250 °C: 300 W
• Air exchange speed at 250 °C: 6 per hour
• Working Temperature (from 5°C ambient temp): 250 °C

Features:

A line of economical drying ovens with a wide temperature range, precise and reliable course of simple drying and heating processes. The line ECOCELL is characterized by a noiseless run and a fine air streaming within the useful space.

Specifications:

• Dimensions: 790 mm x diameter of the air branch outer/inner 52/49 mm x 760 mm
• Tray storage area: 520 x 485 mm
• Racks: 19 max
• Maximum weight per tray: 30 kg
• Maximum weight inside the oven: 100 kg
• Working temperature (beginning of the regulation): from 5 °C above ambient temp. to:250 °C
• Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door: time variation cca (±)<= 1 °C, space deviation cca (±) % of the reached temperature 2,5 %
• Time required to reach 250 °C with closed air flap and voltage 230 V: 85 min
• Heat emission at 250 °C: 1940 W
• Air exchange speed at 150 °C: 4 per hour
• Electricity - mains 50/60 Hz: max. power input 3,6 kW
• Nominal voltage: 400/3N V
• Current: 7,8 A
• Chamber volume: 707-liter
• Working temperature: from +5°C over ambient temperature up to 250/300°C
• Natural fine air flow in the chamber, noiseless operation
• High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry
• High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
• Standard model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Features:

This glass tube oven consists essentially of two concentric tubes of borosilicate glass mounted in the holder. The heating is accomplished by a totally transparent electrically conducting semiconductor layer vaporized on to the exterior of the glass tube

Specifications: 

• Temp range: 30 - 250 C +/- 10 degrees accuracy
• Turns ball: 15-18RPM/ 110-117V/220-240V

Specifications:

• Temperature Range: +40°C to +260°C
• Temperature Uniformity: ±3% at 100°C. Actual performance may vary depending on load,chamber size,sample placement,ambient temperature and environmental conditions.
• Controller: Microprocessor automatically optimizes control parameters during operation. Digital, single setpoint with simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in °C and °F.
• Control Accuracy: ± 0.5% typical.
• High Limit Overtemp: Adjustable high temperature limit protection.
• Heating Elements: Long-life,low-watt density elements, enclosed and protected.
• Interior Construction: Corrosion resistant 304 brushed stainless steel.
• Exterior Construction: Triple-wall,heavy gauge steel with scratch-resistant finish,or stainless steel (see chart);door latch (adjustable) and rugged hinges.
• Insulation: Fiberglass,minimum 3" on all sides.Peripheral silicon door gasket to minimize heat loss.
• Ports and Vents: Adjustable intake bottom right side;exhaust top right side,1.0" (25.4 mm) diameter.
• Air Exchange: Intake port allows fresh air entry to establish gravity airflow pattern.
• Shelves: Two (2) open wire shelves,adjustable. All models include 16 shelf positions at 0.875" increments.Stainless steel exterior models have stainless steel shelves;others are nickel plated.Stainless steel (S models only).
• Electrical: 120V, 50/60 Hz
• Interior Dimensions(W X F-B X H in" (mm)): 19" (480) x 15" (380) x 18" (450)
• Exterior Dimensions(W X F-B X H in" (mm)): 29" (730) x 22" (560) x 31" (780)

Features:

Hertherm IGS180 Incubator

Specifications:

• Capacity (cu ft): 6.9

• Capacity (Liters): 194

• Control Type: Digital

• Max Temperature (° C): 75

• Temperature Stability: ± 0.2°C at 37°C

• Overall Depth (in): 29

• Overall Depth (cm): 74

• Overall Height (in): 36 ¼

• Overall Height (cm): 92.1

• Overall Width (in): 25 ¼

• Overall Width (cm): 64.1

• Power (VAC): 120

• Power (Hz): 60

• Power (watts): 720

• Chamber Depth (in): 23 ¼

• Chamber Depth (cm): 59.1

• Chamber Height (in): 27

• Chamber Height (cm): 70.8

• Chamber Width (in): 18 5/16

• Chamber Width (cm): 46.5

• Display Type: Vacuum Fluorescent

• Number Of Shelves: 2

• Number Of Shelf Positions: 19

• Internal Construction: Stainless steel

Features:

Achieve maximum temperatures of 220°C (428°F) with Thermo Scientific™ Vacuum Ovens, while benefiting from two control configurations and display options. These ovens feature independent vacuum and purge needle valves. Radiant warm-wall heating system optimizes uniformity and conserves chamber space for drying, curing, vacuum embedding and plating applications.

• Hydraulic thermostat temperature control with dial thermometer (5°C increments); medium and large units available with LED display (1°C increments)
• Polycarbonate safety shield protects door glass
• Silicone door gasket and positive latch door maintain seal at all vacuum levels – use of vacuum grease is recommended
• Vacuum and air lines are corrosion-resistant stainless-steel tubing for optimum chamber cleanliness and long-term performance
• Two removable stacking aluminum shelves

Specifications:

• Temperature Range: Ambient +10° to 220°C

Specifications:

• Temperature range: +15°C to +220°C
• Variation at 100°C: ±7.3
• Internal dimensions: 585 x 460 x 555 mm
• External dimensions: 740 x 625 x 922 mm
• Weight: 59 kg

Specifications:

• Temperature range: 100-550°F
• Interior dimensions: 18” x 14” x 18” (W x H x D)

Features

• 4-Digit LED

General Specifications:

• Chamber Volume: 2.9 ft
• Chamber (W x H x D): 21 x 18 x 18 in
• Temperature Range: +10 °C to +250 °C
• Temperature UNiformity  @ 100°C:  ±1.5° C
• Resolution: 0.1⁰C
• Rise Time: 46 min (to 200⁰C)
• Number of Shelf Positions: 16
• Power Requirements: 120 VAC, 60 Hz, 14 A

Specifications:

• Dimensions: 27 x 18 x 18 in

• Power Requirements: 120V, 60Hz

• Maximum Temperature: 482 °F (260°C)

• Volume: 2.9 cubic feet

Quick, cost-saving, ecological laboratory oven meeting higher demands with a 111-liter chamber volume. High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening. Wide range of optional equipment and accessories (vacustation box enabling a selected vacuum pump installation) and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (111 l), depth (410 mm), width (540 mm), height (480 mm)
• External dimensions: depth (640 mm), width (760 mm), height (880 mm)
• Package dimensions: depth (730 mm), width (830 mm), height (1070 mm)
• Weight: 5 kg (gross)
• Working temperature (from 5°C over ambient temp): 200 °C
• Heat radiation at 100 °C: 370 W

Features:

The Vacucell line offers a vacuum drying with the possibility of chamber air extrusion by inert gas which can be used for heat labile and oxidation sensitive substances, as well as for pieces with hardly accessible openings and threads. Ideal for drying samples up to a constant mass.

Specifications:

• Dimensions of shelf: 480 x 386 mm
• Chamber volume: 111-liter
• Trays: 2 pcs
• Racks: 8 max
• Working temperature: from +5°C over ambient temperature up to 200/300°C
• Working temperature (regulation start): from 5 °C over ambient temp to 200 °C
• Temp. deviations acc. to DIN 12 880 Part 2 from working temp – Al shelves pressure 5–10 mbar:
  in time to: 0,4 ± °C
  in space, temperature 100 °C do: 3 ± °C
  in space, temperature 200 °C do: 7 ± °C
• Temp. deviations acc. to DIN 12 880 Part 2 from working temp – ss shelves pressure 5–10 mbar:
  in time to: 1 ± °C
  in space, temperature 100 °C do: 11 ± °C
  in space, temperature 200 °C do: 26 ± °C
• Time of rise onto 98 % voltage 230 V – (Al shelves pressure 5–10 mbar):
  onto temp 100 °C: 110 min
  onto temp 200 °C: 130 min
• Time of rise onto 98 % voltage 230 V – (shelves pressure 5–10 mbar):
  onto temp 100 °C: 170 min
  onto temp 200 °C: 220 min
• Heat radiation:
  at 100 °C: 370 W
  at 200 °C: 750 W
• Vacuum connection:
  feedthrough needle valve for inert gas or air: 8 mm
  measuring access: 40 mm
  vacuum connection measuring DN: 16 mm
• Electric parameters – mains: 50/60 Hz
• Nominal voltage: 230 V
• Mains 50/60 Hz: 1,8 kW
• Current: 7,8 A
• Noiseless operation and soft heating of samples in the chamber; high-quality and safe heating and drying of samples to constant mass
• High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
• Suitable for perfect drying of thermolabile and oxidation-sensitive materials, complex-shape components, samples drying to constant mass etc. under vacuum
• Standard model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories (e.g. a “Vacustation” box enabling a selected vacuum pump installation, …)
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)