Used Lab Equipment

Features:

Wave Biotech Load Cell Controller

Description:

Single Path Monitor UV-1 is a dual beam flow through UV absorptiometer for monitoring the UV absorption of a flowing liquid at 254nm, 280 nm, or 405 nm, comes with the UV-1 control unit, optical unit, one 280 nm wavelength filter and one 280 nm converter, and with a flow cell with optical path length of either 3 mm or 10 mm.

AKTA FPLC system is a fully automated liquid chromatography system designed for research scale purification of proteins, wherein proteins of various sizes can be readily purified using different kinds of columns.

Features:

• P-920 Pump
• UPC-900
• Frac-900 Fraction Collector
• INV-907 Injection Valve
• M-925 Mixer: All eluents can be mixed with a high degree of accuracy an reproducibility.
• Box 900: Storage compartment and Solvent Tray
• Computer loaded w/ Unicorn Version. 5.31 Software, Monitor Keyboard & Mouse 
• Manuals

Model 3300 ELSD is designed for use with High Performance Liquid Chromatography (HPLC) systems to analyze any sample compound that has sufficiently lower volatility than the mobile phase. Some of its possible application areas include carbohydrates, pharmaceuticals, lipids, triglycerides, underivatized fatty and amino acids, polymers, surfactants, nutraceuticals, and combinatorial libraries. Evaporative light scattering detection eliminates common problems associated with other HPLC detectors. Refractive Index (RI) detectors can be complicated by solvent front interferences, baseline instability, and gradient incompatibility. RI detectors can also have a less sensitive response than ELSD. Low-wavelength UV can suffer baseline drift with steep gradients and also requires that the analyte contains a chromophore. ELSD does not have these limitations. It can achieve stable baselines with multisolvent gradients for improved resolution and faster separations. Also, since ELSD response does not depend on the sample’s optical characteristics, the sample does not require a chromophore or fluorophore for detection.

Specification:

• Light Source: Laser diode with collimating optics, 650nm, max output less than 30mW, class IIIB
• Product Class: Class 1 laser product
• Detector Element: Silicon photodiode
• Temperature Range: Ambient to 120°C in 0.1°C increments
• Nebulizer Gas: Up to 4L/min, nitrogen preferred, 65psig min. pressure, 80psig max pressure
• Mobile Phase Flow Rate: 50uL - 3.0mL/min
• Analog Outputs: Selectable for either 0 - 1V or 0 - 10mV full scale

• Communications

• Remote Inputs: TTL/Contact closure-Autozero, Gas Shutoff, Start, Standby
• Outputs: Contact closure-- Fault Relay, External Output; RS232, USB (Device), USB (Host), Ethernet
• Operating Parameter Selection & Display: Windows-Based Graphical LCD with alphanumeric keypad
• Power Requirements: 120/240V, 50/60Hz, 5A
• Dimensions: 11.6" H x 10.3" W x 19.5" D (29.5cm H x 26.2cm W x 49.5cm D)
• Weight: 30 lbs (13.6 kg)
• Environmental Operating Temperature: 15 to 40ËšC
• Relative Humidity: 10 - 90%, non-condensing

Specifications:

• Sample capacity: 96 × 0.2 mL PCR tubes or 1 x 96-well PCR plate (8 × 12)
• Temp. control range of the block: 4 – 99 °C
• Temp. control mode: Fast, Standard, Safe
• Heating technology of the block: Peltier elements, Triple Circuit Technology
• Gradient range: 1 – 20 °C
• Gradient temperature range: 30 – 99 °C
• Lid temperature range: 37 – 110 °C
• Block homogeneity: 20–72 °C ±0.3 degree Celsius
• Block temperature accuracy: ±0.2 degree Celsius
• Block homogeneity: 90 °C ±0.4 degree Celsius
• Heating rate: 4 °C/s 1
• Cooling rate: 3 °C/s 1
• Gradient block: Over 12 rows
• Interfaces: 1 × Centronics, 1 × RS-232,
• Total weight: 18.5 kilogram (40.8 lbs)
• Power supply: 110 V or 230 V, 50 – 60 Hz
• Max. power consumption: 950 watt
• Dimensions (W × D × H): 26â€¯× 41.5â€¯× 37 cm
• Thermoblock: Aluminum
  

The first ever serological pipet controller that also allows users to aliquot with the press of a single button.

Specifications:

• Dimensions: 7.2’’ x 7.0’’ x 2.2’’ (18.3 cm x 17.8 cm x 5.6 cm)
• Weight: 340g
• Volume Capacity: Accepts 1 to 100 mL serological pipets Pipet 

• Mains/ power supply:
  • Input Voltage = 100-240 VAC
  • Frequency = 50-60 Hz
  • Input Current = 190-320 mA
  • Output Voltage = 5V
  • Output Current = 2 A 

• Rechargeable Battery:
  • Type = Lithium-Polymer Voltage = 3.7V
  • Capacity = 1100 mAh
  • Charging Time = ~ 3 hr
  • Number of Dispenses = ~2000 dispenses (with a 25mL pipet)

Ideal for the precise control of temperatures.

Specifications:

• Measuring Range: -10° to +400°C
• Control Precision: ± 0.2 °C
• Relative Humidity: 80%
• Display: Digital
• Cable Length: 350 mm
• Dimensions: 2.7” x 5.9” x 2.5” in. (W x D x H)

The G1512A Autosampler Controller for a 5890 or 6890 GC.  This unit transfers the communication between the Autosampler and the GC.

Features:

Inheco Multi TEC Control

Specifications:

• Controls 1 single position

• FW-command-set for easy integration

• USB interface

• Software for basic device control

• Operation by touch screen

Specifically designed to minimize operator fatigue, the Portable Pipet-Aid XP is smaller and lightweight. It accepts most pipettes from 1 to 100 mL.

Each pipette filler and pipet dispenser button has three speeds, (F) Fast, (M) Medium, (S) Slow. The medium speed is suitable for most routine techniques. Fast speed can deliver up to 50 mL in 5 seconds and can be used for rapid filling of large pipets or breaking up cell clumps. Slow speed is ideal when using small pipettes or when more precise delivery is required. A gravity drain model is available which substitutes a gravity drain (G) function for the fast (F) mode on the dispense button.

The XP is powered by a 9 volt (Ni-MH) rechargeable battery.

A Tissue Culture Nosepiece, which features a unique filter element, will cease to allow air to pass in either direction if it becomes wet, alerting the user to possible contamination of the rubber insert.

Features:

• The lightweight, compact Portable Pipet-Aid®
• Three-speed settings provide more precise control for use in the pipet filler mode and the pipette dispenser mode
• Easy access battery replacement
• EZ Grip nosepiece with double membrane filter
• Removable stand

Specifications

• Size: 5.5˝
• Weight: 7.5 oz.
• Capacity: Accepts 1 to 100 mL pipets
• Battery: 9 Volt Ni-MH

Description:

The TEC Control Unit controls the temperature and shaking performance (Frequency, amplitude, pattern) for a range of INHECO\'s heating/cooling units and shakers. Examples of devices which are controlled by the TEC: CPAC, HeatPAC, Heated lid, Teleshake 95, Thermoshake, etc.

Specifications:

• Inheco Tec Control 935 with Watlow Display
• Temperature: Up to 135°F (57°C)

Features:

• Loop volume 5-1000µl
• 96 vials 1.5 ml vial capacity
• A-900 autosampler designed for use with AKTA
• Syringes 100 - 1000 µl
• Built-in compressor

Features:

• A-905 is an automated sampling injector for use with AKTA systems
• Sample capacity: 96-well and 384-well microplates
• Maximum total plate height: 47 mm
• Dispenser syringe: 250 - 1000 µL
• Loop volume: 5 - 1000 µL
• Built-in compressor

AKTA Explorer is designed for scouting, development and optimization of methods for all chromatographic techniques.  Flexibility and high levels of automation in combination with reproducibility and reliable operation make it an excellent choice for laboratories involved in method and process development.

Features:

• Box 900: Storage compartment and Solvent Tray
• P-950 sample pump
• UV-900
• pH/C-900: pH and Conductivity Detector
• M-925 Mixer: All eluents can be mixed with a high degree of accuracy an reproducibility.
• P-900 Series Gradient Pump
• Frac 950 Fraction Collector
• CU-950: Communications Module
• Computer loaded w/ Unicorn Version. 5.31 Software, Monitor Keyboard & Mouse 

Features:

AKTAmicro, including BOX900, PH/C-900. UV-900,P-905

Micro Purification and purity analysis of biomolecules at submicrogram levels

Specifications:

• Voltage: 100-240V
• Frequency: 50-60Hz
• Max Power: 600 VA
• Fuse: T 6,3AL 250V
• Lamp intensity:210nm 69% 300nm 70%