Used Lab Equipment

Description:

Single Path Monitor UV-1 is a dual beam flow through UV absorptiometer for monitoring the UV absorption of a flowing liquid at 254nm, 280 nm, or 405 nm, comes with the UV-1 control unit, optical unit, one 280 nm wavelength filter and one 280 nm converter, and with a flow cell with optical path length of either 3 mm or 10 mm.

Features:

• Loop volume 5-1000µl
• 96 vials 1.5 ml vial capacity
• A-900 autosampler designed for use with AKTA
• Syringes 100 - 1000 µl
• Built-in compressor

AKTAprime plus is a compact chromatography system designed for one-step purification of proteins at laboratory scale. AKTAprime plus offers significant advantages in terms of speed, capacity and fraction collection.  AKTA PRIME is available only as a complete system with the following built-in functions: Gradient Pump, Motorized 8-port buffer selection valve, motorized injection valve, monitor, fraction collector.

Features:

• Fraction collector
• pH Electrode
• UV Monitor
• Computer loaded w/ Primeview Software, Monitor Keyboard & Mouse 

AKTAprime plus is a compact chromatography system designed for one-step purification of proteins at laboratory scale. AKTAprime plus offers significant advantages in terms of speed, capacity and fraction collection.  AKTA PRIME is available only as a complete system with the following built-in functions: Gradient Pump, Motorized 8-port buffer selection valve, motorized injection valve, monitor, fraction collector.

Features:

• Fraction collector
• pH Electrode
• UV Monitor
• Computer loaded w/ Primeview Software, Monitor Keyboard & Mouse 

ÄKTAxpress Module

ÄKTA xpress is a chromatography system designed for automated, multistep protein purification of both single and multiple samples.

• Unattended purification: Built-in purification knowledge combines software, hardware, and prepacked columns to eliminate time-consuming manual tasks.
• Highest possible purity: Optimized protocols with up to four steps will deliver tagged proteins of near 100% purity. Built-in cleaning procedures between MAb samples to minimize carry over
• High productivity: Each module can purify up to four proteins. The modular design offers adaptability to meet increased throughput needs.
• Yield : The system is capable of purifying target proteins in yields varying from 1 to 50+ mg.
• Akta Express has a Small footprint: A compact design allows the system to occupy minimal space on the bench or in the cold room.

ÄKTAxpress Module

• Complete Packsize: 1 Piece
• Application: Unattended multistep purification of tagged proteins and antibodies
• Flow Rate: 0.1-65 ml/min
• Operating Pressure Max.: 3 MPa (435 psi)
• Tubing i.d. [Flow Path]: 1 mm
• Single Wavelength Detection: Mercury lamp and 254 and 280 nm filters included. Optional filters for 313, 365, 405, 436 and 546 nm.
• Multiple Wavelength Detection: No
• Flow Cell Path Length: 2 mm
• Multiple Sample Injection: Yes, up to 4 samples
• Autosampler Injection: No
• Automatic Buffer Preparation: No
• Buffer Selection: 10 buffer inlets
• Multi-Step Purification: Yes, up to 4 steps
• Relative Humidity: 20%-95% (non condensing)
• pH Stability Long Term: 2-12
• pH Stability Short Term: 1-14
• Viscosity: max 5 cP
• Width: 250 mm
• Height: 660 nm
• Depth: 600 mm
• Weight: 30 kg
• Voltage: 100-120/220-240 VAC
• Power Consumption: 120 VA
• Protection Class: IP 20
• Pump Type: Piston pump, metering type

Features:

• Frac-900 designed to work with AKTA series FPLC
• 95 places rack for 10-18mm tubes
• Fraction size 0.05 - 100 ml (0.001 ml increments)
• Time mode 0.01-9.999min, volume mode 0.01-9.999 ml
• Max flow rate 100 ml/min
• Peak detection and location capability, programmable collection modes

Includes:

• Manual
• Vial Holder rack
• Power Cord

Specifications:

• Maximum flow rate: 100 ml/min
• pH stability range: 1 to 13, 1 to 14 (<1 day exposure)

Fraction size

• Volume mode: to 99999.99 ml
• Time mode: to 99999.99 min

No spillage range for DropSync

• Microplates: 0 to 1.0 ml/min
• 12 mm rack: 0 to 1.5 ml/min
• 18 and 30 mm rack: 0 to 2.0 ml/min

No spillage range for Accumulator

• All racks: 0 to 100 ml/min

Includes:

• Manual
• Vial Holder rack
• Power Cord

Specifications:

• Maximum flow rate: 100 ml/min
• pH stability range: 1 to 13, 1 to 14 (<1 day exposure)

Fraction size

• Volume mode: to 99999.99 ml
• Time mode: to 99999.99 min

No spillage range for DropSync

• Microplates: 0 to 1.0 ml/min
• 12 mm rack: 0 to 1.5 ml/min
• 18 and 30 mm rack: 0 to 2.0 ml/min

No spillage range for Accumulator

• All racks: 0 to 100 ml/min

Description:

Single Path Monitor UV-1 is a dual beam flow through UV absorptiometer for monitoring the UV absorption of a flowing liquid at 254nm, 280 nm, or 405 nm, comes with the UV-1 control unit, optical unit, one 280 nm wavelength filter and one 280 nm converter, and with a flow cell with optical path length of either 3 mm or 10 mm.

Specification:

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Wavelength range: 190–600 nm
• Short term noise (ASTM): ±0.75×10^-5 AU at 254 nm
• Drift: 3 × 10 ^-4 AU/hr at 254 nm
• Linearity: 2 AU (5%) upper limit
• Wavelength accuracy:
• Band width: 5 nm typical
• Flow cells:
  • Standard: 14-μl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum
  • High pressure: 14-μl volume, 10-mm cell path length and 400 bar (5880 psi) pressure maximum
  • Micro: 1-μl volume, 5-mm cell path length and 40 bar (588 psi) pressure maximum
  • Semimicro: 5-μl volume, 6-mm cell path length and 40 bar (588 psi) pressure maximum
• Control and data evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, one output
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter
• Housing: All materials recyclable.

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack