The Eddy Jet 2 Spiral Plating System is a color screen touch screen fully programmable spiral inoculation instrument with accuracy and reproducibility of greater than 99%. This uses a unique gamma-Irradiated disposable micro-syringe for each new sample, eliminating cross-contamination and the need for a vacuum source or washing steps.
The system includes refrigeration and a compact counter design. Smooth direct drive motor with easy change brushes and three position braking.
HYDRIM L110W G4 washer has a 10 full-size cassette capacity and will allow offices to turnover 2500 thoroughly cleaned instruments in a 10 hour day.
Under the counter stericentre installation with furniture available for specialized set-ups. HIPTM cleaning solution is stored in the unit, no extra storage space required
Time saved using automated washing compared to manual cleaning is approximately 1 hour of labour for every nine procedural set-ups.1
Height, freestanding: 850 mm / 33.5"
Height, built-in: 830 mm / 32.75"
Width: 600 mm / 23.75"
Depth: 600 mm / 23.75"
Depth with door open: 1200 mm / 47"
Weight: 80 kg / 176 lbs.
Running Noise: 60 dB(A)
Hot and cold water connections: 3/4”
Inlet water pressure: 1-10 bar/14.5-145 psi
Incoming hot water temperature: 50-70°C / 122-158°F
Water softener: 1 kg / 2.2 lbs salt capacity
Drying System: Heater 1 kW
Electrical Connection: 208-240 V 60 Hz 15 A
Equipment pollution degree: Pollution Degree 2
Equipment installation category: Installation category II
Maximum relative humidity: 80% for temp up to 31°C / 88°F
50% for temp up to 40°C / 104°F
Operating temperature range: -5°C to 40°C / 23-104°F
Max. altitude: 2000m / 6561.7 ft.
Mains supply: + / -10% of nominal
Weight: 465 kg (1025 lb)
Height (overall): 120.7 cm (47.5 in.)
Width: 94.0 cm (37 in.)
Depth: 67.3 cm (26.5 in.)
Ventilation clearances: 5.1 cm (2 in.) sides; 15.2 cm (6 in.) rear
Maximum heat dissipation into the room: 1.0 kW (3400 Btu/hr)
Humidity restrictions: <95% (non-condensing)
Noise level measured 0.91 m (3 ft) in front of the Instrument: <57 dBa
Installation (overvoltage) category: II
Pollution degree: 2a
Revolution Counter: Displays accumulated total number of rotor revolutions in tens of thousands
Barrier Ring: 41-mm (1.63-in.) heat-treated steel alloy armor ring surrounded by a 12-mm (0.50-in.) steel vacuum chamber to provide full protection for the operator
Door: 17.5-mm (0.69-in.) high-strength structural steel
Vacuum: Diffusion pump in series with a mechanical pump typically reduces chamber pressure to below 5 microns (0.7 Pa)
Acceleration: Selection from two profiles: maximum acceleration from 0 rpm to set speed, or slow acceleration from 0 to 500 rpm, followed by maximum acceleration to set speed
Deceleration: Selection from three profiles: full dynamic braking to 0 rpm, slow (full brake to 500 rpm followed by reduced braking to a gentle stop), or no brake
Operation: Standard, programmed, or delayed start; instrument memory can store up to nine programs
Key Switch: Used to select normal or zonal operation
With a two piece cold trap condenser the Buchi Rotavapor R-200 system is perfect for low boiling solvents. This rotavapor system also features an internal motorized hydraulic mechanism to assist users with the raising and lowering of samples and compounds. A digital display exhibits all necessary data to the user at all times with sharp visibility.
Buchi R-200 Rotavapor System
V-800 Vacuum Controller
The Buchi R-205 Rotavapor System is considered to be the most desired high-end rotary evaporator on the market and is known for its versatility and reliability. This Buchi R-205 Rotavapor System includes the Buchi B-490 Heating Bath, "C' glassware attachments Buchi V-500 vacuum pump and V-800 vacuum controller.
The Buchi R-205 Rotavapor System is considered to be the most desired high-end rotary evaporator on the market and is known for its versatility and reliability. The R-205 features a rotation range of 20 to 280 rpm, an automatic height adjustment switch, and an average power consumption of 120 watts. You can process samples from 50 mL to 3 L with this system. The Buchi V-800 vacuum controller has a reading range of 0 to 1400 millibar and a regulation range of 1 mbar/torr to atmospheric pressure.
The Tali Image-Based Cytometer is a 3-channel (bright field, green fluorescence, red fluorescence) benchtop assay platform that uses state-of-the-art optics and image analysis to perform assays for cells in suspension, including GFP and RFP expression, apoptosis, cell viability (live, dead, and total cells), cell cycle, and cell counting assays. It is compatible with a wide variety of eukaryotic cells. In addition to the bright field channel, the Tali® Image-Based Cytometer features two fluorescent channels (green and red), enabling it to simultaneously count green or red fluorescent stains, as well as cells expressing GFP and RFP.