Used Lab Equipment

Specifications:

• (2) CFI 10x/20 eyepieces
• 0.90 Nikon Dry Condenser
• Mechanical Stage
• Binocular
• Objectives:
  • 10x Ph1
  • 40x Ph1
  • 100x Ph1 Oil
• Focusing: 
  • Right - Fine focus
  • Left - Coarse and fine focus

Single Laser Configuration

Includes Computer Loaded with Cytosoft Software

The guava easyCyte flow cytometry systems are cost-effective, easy to use and deliver complete and comprehensive cell analysis- right on your benchtop. The culmination of over a decade of flow cytometry expertise, these instruments consume less sample, generate less waste and are easier to use and maintain than traditional flow cytometers—all while providing the analytical power you need to expand your research horizons.

Features:

• Blue Laser
• Forward and Side Scatter
• Tube Sampling
• Automated 96 Well Micrplate Sampling
• Small Sample Size (<20 μL)
• Minimal waste (<50 mL per day)
• Detectors
  • Green
  • Yellow
  • Red

Fluidics Specifications:

• Flow Cell Dimension: Standard square capillary with ID of 100 µm
• Pump: Positive displacement
• Sheath Fluid: None
• Sample Flow Rate: 7µL/min to 72 µL/min
• Waste Generation: typically <40mL in 8 hours of continuous use
• Dead Volume: 50 µL (for 96-well microplate)
• Sample Requirement: as few as 2,000 cells/test; typically 25,000 – 100,000 cells
• Cell Size: 1-60 µm
• Typical # of Cells/Protocol: 1,000 – 10,000 cells/test

Specifications:

• (2) CFI 10x/20 eyepieces
• 0.90 Nikon Dry Condenser
• Mechanical Stage
• Binocular
• Objectives:
  • 10x Ph1
  • 40x Ph1
  • 100x Ph1 Oil
• Focusing: 
  • Right - Fine focus
  • Left - Coarse and fine focus

Specifications:

• Dual fluorescence filters manual
  • Upper Thor laser
• 40x PA .95NA objective with correction collar
• Phase condenser
• Nikon Perfect Focus 2
• Prior H117EINS motorized X/Y stage with Proscan 3 controller
• Photometrics 95B digital Camera with 1x c-mount adapter (left side)
• Lumencor Solar Epi Light source lower fluorescence turret 535nm cube
• Right Port Thor SM1CP2 Nikon Beam splitter with eyeview USB 3 digital camera
  • Launch to 32 fiber optics with Thor CB74EX UK 6 axis manipulator for launch alignment
  • 2x Hamamatsu 8 channel PMT detectors H11452-20 PA0347
  • 16x Thor EF112 Low Pass Filter
  • National Instruments BNC-2110 controller with USB switching
• Coherent OBIS 488 Laser Mod 150nm to Thor launch
• Thor laser expander with manual Z axis control
• West Pro-EC44 temp control
• Custom climate controller
• i7-7700 CPU 3.60GHz PC 16gb ram
  • Micro-Manager
  • Stage Auto
  • Genturi Viper
  • Pulsed AO
• 20x PA .75NA objective
• 20x Splan FL .7 objective with correction
• 10x Fluor objective
• Newport Isolation anti-vibration 3’ / 4’ Tables with blackened enclosures access doors in front and rear including laser safety switch

Specifications:

• Dual fluorescence filters manual
  • Upper Thor laser
• 40x PA .95NA objective with correction collar
• Phase condenser
• Nikon Perfect Focus 2
• Prior H117EINS motorized X/Y stage with Proscan 3 controller
• Photometrics 95B digital Camera with 1x c-mount adapter (left side)
• Lumencor Solar Epi Light source lower fluorescence turret 535nm cube
• Right Port Thor SM1CP2 Nikon Beam splitter with eyeview USB 3 digital camera
  • Launch to 32 fiber optics with Thor CB74EX UK 6 axis manipulator for launch alignment
  • 2x Hamamatsu 8 channel PMT detectors H11452-20 PA0347
  • 16x Thor EF112 Low Pass Filter
  • National Instruments BNC-2110 controller with USB switching
• Coherent OBIS 488 Laser Mod 150nm to Thor launch
• Thor laser expander with manual Z axis control
• West Pro-EC44 temp control
• Custom climate controller
• i7-7700 CPU 3.60GHz PC 16gb ram
  • Micro-Manager
  • Stage Auto
  • Genturi Viper
  • Pulsed AO
• 20x PA .75NA objective
• 20x Splan FL .7 objective with correction
• 10x Fluor objective
• Newport Isolation anti-vibration 3’ / 4’ Tables with blackened enclosures access doors in front and rear including laser safety switch

Specifications:

• Temperature Range: +40°C to +260°C
• Temperature Uniformity: ±3% at 100°C. Actual performance may vary depending on load,chamber size,sample placement,ambient temperature and environmental conditions.
• Controller: Microprocessor automatically optimizes control parameters during operation. Digital, single setpoint with simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in °C and °F.
• Control Accuracy: ± 0.5% typical.
• High Limit Overtemp: Adjustable high temperature limit protection.
• Heating Elements: Long-life,low-watt density elements, enclosed and protected.
• Interior Construction: Corrosion resistant 304 brushed stainless steel.
• Exterior Construction: Triple-wall,heavy gauge steel with scratch-resistant finish,or stainless steel (see chart);door latch (adjustable) and rugged hinges.
• Insulation: Fiberglass,minimum 3" on all sides.Peripheral silicon door gasket to minimize heat loss.
• Ports and Vents: Adjustable intake bottom right side;exhaust top right side,1.0" (25.4 mm) diameter.
• Air Exchange: Intake port allows fresh air entry to establish gravity airflow pattern.
• Shelves: Two (2) open wire shelves,adjustable. All models include 16 shelf positions at 0.875" increments.Stainless steel exterior models have stainless steel shelves;others are nickel plated.Stainless steel (S models only).
• Electrical: 120V, 50/60 Hz
• Interior Dimensions(W X F-B X H in" (mm)): 19" (480) x 15" (380) x 18" (450)
• Exterior Dimensions(W X F-B X H in" (mm)): 29" (730) x 22" (560) x 31" (780)

Description:

The E-Gel iBase Power System has an LCD display, which shows information about the program selected and running time. The display is located near the upper edge of the iBase device. Just below the display, the E-Gel iBase Power System has four buttons:

• Go button starts programs
• Mode button toggles between programs, minutes, and seconds
• Up button selects between programs on the display and increases running time
• Down button selects between programs on the display and decreases running time

An LED light (in the middle of the four buttons) indicates the status of the iBase device. The gel cassette is inserted into the two Electrode connections at the lower right of the iBase Power System. The back of the E-Gel iBase Power System contains a USB port and a power inlet. The supplied power cord has a matching connector that inserts into the power inlet, and connects the E-Gel® iBase™ Power System to the electrical outlet. A separate, stand-alone power supply is not required to run the iBase™ device.

Specification:

• Dimensions: 18.4 cm x 11 cm x 5.75 cm
• Weight: 500 g
• Electrical requirements: 100–240 V AC, 50/60 Hz< 1.0 A
• Temperature: 5°C to 40°C
• Built-in features: LCD Display, Alarm , LED light

Description: The DO308 drying oven is ideal for accurate water determination of solid or viscous samples like:

• Substances that release water only at elevated temperatures such as plastics in powder or granular form
• Substances that cause side reactions with Karl Fischer reagent such as oxidizing inorganic salts
• Substances that cause problems in the titration vessel due to their consistency such as fibrous or pasty substances
• Substances that are poorly soluble or insoluble such as wool, dough, tar or coal

Specifications:

• Temperature range: 40 - 300 °C
• Temperature accuracy: ±5 °C (@300°C)
• Footprint housing: 256 x 180 mm
• Dimensions overall: 500 x 220 mm
• Voltage (auto selection): 100 ... 230 VAC   
• Max. power consumption: 450 W
• Height: 390 mm
• Weight: 9.1 kg
  
  

Features and Benefits

• Easy and fast manual handling - Easy handling for left and right handed operators. Sample exchange and sample transport into the heated zone of the oven is provided for by the simple transport system with a magnetic guide rod attached to the glass sample boat.
• Equilibrium conditions are quickly reached - The cold and the hot zone can be purged separately with dry carrier gas using a stopcock. Ambient moisture introduced during sample exchange or addition via the sleeve opening is quickly carried away. Therefore, a stable drift is reached within a short period of time.
• Enhanced operational safety - There is no need to remove the transfer tube from the titration cell after switching off the oven; just open the stopcock to avoid contamination of the oven due to underpressure. Different temperature ranges can be pre-programmed in one cycle. Safety is further improved by automatic shut down after the analysis is completed.
• Ready for use - All necessary parts including the drying unit with gas flow measurement are part of the standard delivery. If purging with dry air is desired, an optional air pump is available.

The Beckman J2-MC system is a high-speed, high-capacity floor model ultracentrifuge. Equipped with microprocessor controls and an advance induction drive, the J2-MC offers precise speed control and ultimate reproducibility.

The digital control system of the Beckman J2-MC ultracentrifuge puts the full power of the microprocessor control system right in the hands of the operator. The wide range of acceleration and deceleration profiles maximizes your throughput and improves the results of the procedures by minimizing poor separations. 

Specifications:

• Speed Range: 100-21000 rpm
• Speed Control: 20 rpm
• Maximum Force: 51,500 g
• Maximum Capacity: 3 L
• Timer: 0-99 hours 59.9 minutes and hold
• Temperature Range: -20 to 40C
• Temperature Control: 2C for temp 0- amb 1 C after dynamic calibration
• Weight: 656 Ilbs
• Width: 28 in
• Height to Work Surface: 33 in
• Height to Top of Controls: 50 in
• Height with door open: 63 in
• Circuit Breaker: 30A

Specifications:

• Product Type: High Performance Refrigerator
• Total Volume (cubic feet): 49.28
• Lab Grade Refrigerator or Freezer Energy Consumption (kWh/day): 9.14
• Peak Temperature Variance (ºC): 4.56
• Product Form Factor: Upright
• Total Number of Doors: 2
• Number of glass doors: 2
• Door Opening Orientation: Swinging,Left,Right
• Number of Drawers or Shelves: 4
• Dimensions(DxHxW in): 32.87 x 74.25 x 56.75 
• Refrigerant Type: R-404A
• Installed Accessories: shelves only, no additional electrical 
• Insulation: HCFC-free rigid foamed-in-place polyurethane
• Cooling method: Forced air circulation with double fan
• Compressor: 250W, hermetic reciprocating type
• Evaporator: Fin tube type
• Condenser: Fin tube type
• Defrost method: Forced type (cycle defrost system), fully automatic hot pipe for automatic evaporation for drain water
• Defrost heater: 275 W
• Temperature control: Microprocessor controlled on/off type. Thermistor sensor Temp. control range: 20C to 140C (ambient temp. -50C to 00C no-load) 20C to 230C (ambient temp. 00C to 350C no-load) (10C step)
• Safety features: High/low temp. Protection circuit, remote alarm contact, temperature lock, part replacement notification, self diagnostics, memory backup (nonvolatile memory)
• High temp. alarm: Flashing LED & buzzer after 0 to 15 minutes delay
• Low temp. alarm: Flashing LED & buzzer after 0 to 15 minutes delay
• Door ajar alarm: Flashing lamp, buzzer after 0 to 15 minutes delay
• Interior lamp: 40W x 1, fluorescent lamp

Alarm and safety features:

• High temperature alarm: 20C to 140C () above setpoint ( Flashing LED & buzzer )
• Low temperature alarm: 20C to 140C () below setpoint, 00C or lower ( Flashing LED & buzzer )
• Over heating protection: Interior temperature rises to 400C ( Fan motor & heater OFF )
• Over cooling protection: Interior temperature lowers to 10C ( Compressor OFF )
• Tamper proof: Tamper proof key lock ON (Set temperature cannot be altered )
• Memory backup: Power failure (Memory of settings)
• Door ajar: Door not closed ( Door ajar lamp ON & buzzer )
• Self diagnostics: Sensor open or short ( Error code shown E01, E02 )
• Remote terminal: Operation can be checked from office or control room away from the lab

The OHAUS Pioneer series of analytical and precision balances are designed for basic routine weighing in a variety of laboratory, industrial and education applications. With the right combination of performance and features, the OHAUS Pioneer offers uncomplicated performance for all basic weighing needs.

Features:

• 65g x 0.0001g (0.1mg)
• LCD display
• RS232 interface
• Multi weighing units/%/Count

Specification:

• Internal calibration: Yes
• Maximum capacity: 65g
• Pan size: 90mm / 3.5in
• Readability: 0.1mg
• Typical applications: Laboratory, Research
• Data available by: display, RS232
• Measurements: Weight

Features:

The OHAUS Pioneer Series analytical and precision balances are designed for reliable routine weighing at an affordable price. Equipped to handle a variety of laboratory, industrial and education applications, the Pioneer balances are available as both external and internal calibration models. With a backlit LCD, new application modes and built-in environmental settings - these compact yet durable balances fit right in any work setting.

Specifications:

• Dimensions (H x L x W): (11.3 in x 12.6 in x 7.7 in)
• Maximum Capacity: 120 g
• Readability: 0.1 mg
• Pan Size: 3.54 in
• Draftshield: yes
• Communication: RS232
• Display: 7 segment LCD with backlit
• Minimum Weight (USP), Typical: 0.02 g
• Pan Construction: Stainless Steel
• Stabilization Time: 3 s
• Tare Range: To capacity by subtraction
• Units of Measurement: Milligram;  Gram; Kilogram;  Ounce; Ounce Troy;  Momme; Mesghal; Hong Kong Tael;  Singapore Tael; Taiwan Tael; Tical;  Tola; Baht; Custom
• Working Environment: 50°F - 104°F, 80%RH, non-condensing (10°C - 30°C, 80%RH, non-condensing)

Features:

The OHAUS Pioneer Series analytical and precision balances are designed for reliable routine weighing at an affordable price. Equipped to handle a variety of laboratory, industrial and education applications, the Pioneer balances are available as both external and internal calibration models. With a backlit LCD, new application modes and built-in environmental settings - these compact yet durable balances fit right in any work setting.

Specifications:

• Dimensions (H x L x W): (11.3 in x 12.6 in x 7.7 in)
• Maximum Capacity: 120 g
• Readability: 0.1 mg
• Pan Size: 3.54 in
• Internal Calibration: InCal - Semi Automatic
• Draftshield: yes
• Communication: RS232
• Display: 7 segment LCD with backlit
• In-use cover: Yes
• Minimum Weight (USP), Typical: 0.02 g
• Pan Construction: Stainless Steel
• Stabilization Time: 3 s
• Tare Range: To capacity by subtraction
• Units of Measurement: Milligram;  Gram; Kilogram;  Ounce; Ounce Troy;  Momme; Mesghal; Hong Kong Tael;  Singapore Tael; Taiwan Tael; Tical;  Tola; Baht; Custom Working Environment 50°F - 104°F, 80%RH, non-condensing (10°C - 30°C, 80%RH, non-condensing)

Features:

The OHAUS Pioneer Series analytical and precision balances are designed for reliable routine weighing at an affordable price. Equipped to handle a variety of laboratory, industrial and education applications, the Pioneer balances are available as both external and internal calibration models. With a backlit LCD, new application modes and built-in environmental settings - these compact yet durable balances fit right in any work setting.

Specifications:

• Dimensions (H x L x W): (11.3 in x 12.6 in x 7.7 in)
• Maximum Capacity: 220 g
• Readability: 0.1 mg
• Pan Size:3.54 in
• Draftshield: Yes
• Communication: RS232
• Display: 7 segment LCD with backlit
• Minimum Weight (USP), Typical: 0.02 g
• Pan Construction: Stainless Steel
• Stabilization Time: 3 s
• Tare Range: To capacity by subtraction
• Units of Measurement: Milligram;  Gram; Kilogram;  Ounce; Ounce Troy;  Momme; Mesghal; Hong Kong Tael;  Singapore Tael; Taiwan Tael; Tical;  Tola; Baht; Custom
• Working Environment: 50°F - 104°F, 80%RH, non-condensing (10°C - 30°C, 80%RH, non-condensing)

Features:

The OHAUS Pioneer Series analytical and precision balances are designed for reliable routine weighing at an affordable price. Equipped to handle a variety of laboratory, industrial and education applications, the Pioneer balances are available as both external and internal calibration models. With a backlit LCD, new application modes and built-in environmental settings - these compact yet durable balances fit right in any work setting.

Specifications:

• Dimensions (H x L x W): (11.3 in x 12.6 in x 7.7 in)
• Maximum Capacity: 220 g
• Readability: 0.1 mg
• Pan Size: 3.54 in
• Internal Calibration: InCal - Semi Automatic
• Draftshield: Yes
• Communication: RS232
• Display: 7 segment LCD with backlit
• Minimum Weight (USP), Typical: 0.02 g
• Pan Construction: Stainless Steel
• Stabilization Time: 3 s
• Tare Range: To capacity by subtraction
• Units of Measurement: Milligram;  Gram; Kilogram;  Ounce; Ounce Troy;  Momme; Mesghal; Hong Kong Tael;  Singapore Tael; Taiwan Tael; Tical;  Tola; Baht; Custom
• Working Environment: 50°F  104°F, 80%RH, non-condensing (10°C - 30°C, 80%RH, non-condensing)