Used Lab Equipment

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

The Agilent 1200 ALS Thermostat, G1330A controls temperature for either HPLCs or fraction collectors. The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting.

Specifications:

• Weight: 20.7 kg (45.6 lbs)
• Dimensions: 140 × 345 × 435 mm (5.5 × 13.5 × 17 inches)
• Line Voltage: 100 – 120 or 220 – 240 VAC, ± 10 % Automatic selection
• Line Frequency: 50 or 60 Hz, ± 5 %
• Power consumption Autosampler: 300 VA 
• ALS Thermostat: 260 VA

Features:

The Agilent 1290 Infinity Thermostat is designed for use with other modules of the Agilent 1200 Infinity Series or with other LC systems if adequate remote control inputs and outputs are available. The thermostat is controlled from the Agilent 1200 Infinity Series Instant Pilot or from your Agilent control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials

Specifications:

• Temperature Range: Settable from 4 °C to 40 °C in 1 ° increments
• Temperature Accuracy at Ambient
  • Temperatures < 25 °C and humidity < 50 %: 3 °C to 8 °C at a setpoint of 4 °C*
• Temperature Accuracy at Ambient Temperatures
  • temperatures  < 30 °C and humidity < 60 %: 3 °C to 9 °C at a setpoint of 4 °C*

Features:

• Optimized for high-throughput applications and sub two micron column particles
• Maximum reproducibility with isothermal injection and separation
• Greater application flexibility with multiple sample formats
• Superior robustness with a diamond coated high pressure valve Accela Photo Diode Array Detector
• Highest detection sensitivity with proprietary LightPipe technology
• Designed for U-HPLC separations with a 1cm path length, 2µL LightPipe flowcell
• Maximum peak resolution with fiberoptic beam shaper
• Easy maintenance with integrated wavelength validation

Specifications:

• Sample capacity:
  • 200 vials in five removable trays
  • 288 samples in three 96-well microplates
  • 1152 samples in three 384-well microplates
• Standard vial:8 mL volume
• Injection precision: < 1.0% RSD at 5 μL and up
• Partial loop injection volume:
  • 10 μL with standard 25 μL sample loop and 250 μL syringe
  • Up to 1000 μL injection volume with optional loops and syringes
• Fixed loop (full loop) injection volume:
  • 25 μL with standard loop and 250 μL syringe
  • Up to 1000 μL injection volume with optional loops and syringes
• Sample carryover:
  • < 0.1%
  • 6 mL flush volumes, user-specified for internal and external needle wash cycles
• Minimum sample volume: 1 μL can be injected from 5 μL
• Needle height control:
  • Programmable in 0.1 mm increments
  • Active vial bottom search selectable on/off
• Column oven: Programmable in 1 °C increments from 5 to 95 °C
• Tray temperature control:
  • Programmable in 1 °C increments from 0 to 60 °C
  • Typical vial temperature from 4 to 50 °C
• Reagent vials: Four 16 mL vials can be specified for flush/wash or dilution functions
• Remote inputs: Pump ready, inject hold
• Remote outputs: Pump stop, autosampler ready, inject, gradient start, four timed events
• Ambient environment:10 to 40 °C, 5 to 95% relative humidity, non-condensing
• Power requirements: 100/120/220/240 Vac nominal; 50/60 Hz, 550 VA

Features:

The ideal device to accurately set and maintain temperatures: The Eppendorf ThermoStat C is for heating and cooling almost any of your lab vessels.

Specifications:

• Dimensions (W x D x H): 20.6 x 30.4 x 13.6 cm
• Temperature range: Min: 30 °C below RT, max: 110 °C
• Temperature accuracy: Max. ±0.5 °C at 20 – 45 °C
• Temperature settings: -10 °C/110 °C
• Heating rate: Max. 9 °C/min
• Cooling rate: Max. 5.0 °C/min between 110 °C and RT
• Timer: 15 s – 99.30 h, continuous
• Power supply: 100 - 130 V, 50 - 60 Hz

Specifications:

• Temperature: 30° to 200°C
• Temperature Accuracy: 0.01 +/-K
• Capacity: 8L

Specification

• Refrigerant: R22
• Amount: 28 oz (794 g)
• Hot gas settings: 25 PSIG (172 kPa)

• Suction pressure at 25°C

• Suction PSIG: 76 - 89
• Discharge PSIG: 255 - 285
• Speed check: 1.9 - 2.4
• Temperature range: 5°C to 35°C
• Cooling capacity at 20°C: 4500 Watts
• Available voltage: 200 - 230V 1 Ph
• Cooling options: Air / Water

The Thermo Neslab Merlin M25 is a transportable, powerful, and extremely capable CFC- free chiller that provides users with an unchallenged level of dependability and versatility. The Thermo Neslab Merlin M25 Circulating has an extremely flexible temperature range. Because of its relatively small size and adaptable cooling range, the M25 Merlin is extremely well suited for both small and large laboratories. Along with an onboard LCD digital control and display, the M25 Merlin also features a precautionary temperature alarm to alert users whenever temperature thresholds are being reached.

Specifications:

• Temperature Range:-15°C to 35°C
• Cooling Capacity:741W, 2528 BTU/hour
• Capacity:8 L
• Dimensions:9 x 12.6 x 23.5 in
• Temperature Stability:+/- 0.1°C
• Power Requirements: 115V

Specifications:

• Capacity: 1.9L
• Temperature Range: +5°C to +35°C
• Temperature Stability:  ±0.1°C
• Cooling Capacity at 20°C: 1250W
• Cooling Capacity at 5°C: 490 W
• Maximum Flow Rate (L/min): 6.75
• Power Requirements: 115V, 60hz, 13A

Features:

•  Brinkmann Lauda WK 1200 Circulation Chiller 

Specifications:

• Working temperature range (°C): 0-40
• Temperature stability (±K): 0.5
• Cooling output at 20 °C: 1.2kW
• Pump pressure max.: 3.2 bar
• Pump flow max.: 40 L/min

Features:

• Circulation chiller
• 1-line LED display for display of actual or set temperature
• User-friendly menu guidance with simplest 3-key operation
• Electronic 2-point temperature control with hysteresis
• Safety elements for refrigerant pressure, coil temperature. Level indication
• Powerful pressure pump
• Programmable switching contact output
• Filler opening at the front, drain tap
• Automatic compressor on/off control
• Air-cooled version

Specifications:

• Working temperature range: 0 °C ... 40 °C
• Ambient temperature range: 5 °C ... 40 °C
• Temperature control: ± 0.5 °C
• Cooling output at 20 °C: 0 kW
• Pump pressure max: 1.0 bar
• Pump flow max: 30 L/min
• Filling volume max: 12 L
• Overall Dimensions (W x D x H): 350 x 480 x 595 mm