Used Lab Equipment

The ACQUITY UPLC TUV Detector is a tunable, dual wavelength ultraviolet/visible (UV/Vis) detector that offers optimal linearity, resolution, and sensitivity for UPLC/UV separations.  It features uniquely designed, patented, light-guiding flow cell technology, low-noise performance (6 μAU), and support for data rates up to 80 Hz.  The ACQUITY UPLC TUV Detector, coupled with our innovative ACQUITY UPLC Column chemistries and separations modules, leverages ultra-low dwell volume and low-noise, high-speed detection to bring productivity, sensitivity, and resolution that are unprecedented in HPLC techniques being used in the laboratory today.

Specifications:

• Wavelength range: 190 to 700 nm
• Wavelength accuracy: ±1 nm
• Linearity range: Deviation at 2.5 AU ≤5%, propylparaben, at 257 nm
• Baseline noise:6 x 10^-3 AU, at 230 nm, 10 mm shunt cell, 1.0 second filter time constant
• Drift: ≤5.0 x 10^-4 AU/hour/°C at 230 nm
• Sampling rate: Up to 80 points/s
• Unattended operation: Leak sensors, full diagnostic data captured through console software
• Light source: Prealigned, intelligent technology Deuterium lamp
• Flow cell design: Light-guiding UPLC flow cell with intelligent chip technology
• Path length: 10 mm (analytical flow cell)
• Cell volume: 500 nL (analytical flow cell)
• Pressure limit: 1000 psi (all flow cells)
• Wetted materials: 316 stainless steel, fused silica, Teflon AF, PEEK (analytical flow cell)
• Optical bandwidth: 5 nm

Specification:

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Wavelength range: 190–600 nm
• Short term noise (ASTM): ±0.75×10^-5 AU at 254 nm
• Drift: 3 × 10 ^-4 AU/hr at 254 nm
• Linearity: 2 AU (5%) upper limit
• Wavelength accuracy:
• Band width: 5 nm typical
• Flow cells:
  • Standard: 14-μl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum
  • High pressure: 14-μl volume, 10-mm cell path length and 400 bar (5880 psi) pressure maximum
  • Micro: 1-μl volume, 5-mm cell path length and 40 bar (588 psi) pressure maximum
  • Semimicro: 5-μl volume, 6-mm cell path length and 40 bar (588 psi) pressure maximum
• Control and data evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, one output
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter
• Housing: All materials recyclable.

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

The Agilent 1100 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

Optimized sensitivity and selectivity, for reliable quantitative and qualitative information

The Agilent 1100 Series fluorescence detector provides high-sensitivity multisignal detection, online fluorescence spectra, straightforward Operation and maintenance, and built-in features for GLP compliance.

• Simplified optical design for optimized baseline stability.
• Long-life Xenon lamp for highest sensitivity.
• Variable-mode monochromators for selective multisignal detection and online spectra acquisition.
• Easy front access to flow cell for fast inspection or exchange.

Specifications

• Detection type:  Multisignal fluorescence detector with rapid online scanning capabilities and spectral data analysis
• Performance:  10 fg anthracene LOD, Ex 250 nm, Em 400 nm*, Raman (H20) >400 Ex 350 nm, Em 397 nm, dark value 450 nm, standard flow cell
• Light source: Xenon flash lamp, normal mode (20W) and economy mode (5W)
• Pulse frequency: 296 Hz for signal mode, 74 Hz for economy mode
• Excitation monochromator: Concave holographic grating, F/1.6, blaze 300 nm, range 200—700 nm and zero-order, bandwidth 20 nm
• Emission monochromator: Concave holographic grating, F/1.6, blaze 400 nm, range 280—900 nm and zero-order, bandwidth 20 nm
• Reference system: Inline excitation measurement
• Time programing: Up to 4 signals, response time, PMT gain, baseline behaviour (append, free, zero), spectral parameters
• Spectral acquisition: Excitation or emission spectra, scan speed 28 ms per datapoint, e.g. 0.6 s per spectrum 200—400 nm, 10 nm step
• Step size: 1—20 nm
• Spectra storage: Limited only by disk space
• Wavelength repeatability: ±0.2 nm
• Wavelength accuracy: ±3 nm
• Flow cells: Standard: 8 µl volume, 20 bar (2 MPa) pressure maximum, quartz
• Control and data evaluation: Agilent ChemStation for HPLC or Agilent 1100 Series control module with limited spectral data analysis and printing of spectra
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range >102 luminescence units, 2 outputs
• Communications: Controller-area network (CAN), HP-IB, RS-232C, LAN, APG Remote: ready, start, stop and shut-down signals
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.

Specifications:

• Detection type: 1024-element photodiode array
• Light source: Deuterium and tungsten lamps
• Wavelength range: 190 – 950 nm
• Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
• Drift: 2 × 10-3AU/hr at 254 nm
• Linear absorbance Range: 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 – 400 nm
• Slit width: 1, 2, 4 , 8, 16 nm
• Diode width: < 1 nm
• Flow cells
  • Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
  • Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
  • High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
  • 500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
• Control and data Evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

Can be sold as an individual component or as part of a complete stack

Specifications:

• Detection type: 1024-element photodiode array
• Light source: Deuterium and tungsten lamps
• Wavelength range: 190 – 950 nm
• Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
• Drift: 2 × 10-3AU/hr at 254 nm
• Linear absorbance Range: 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 – 400 nm
• Slit width: 1, 2, 4 , 8, 16 nm
• Diode width: < 1 nm
• Flow cells
  • Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
  • Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
  • High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
  • 500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
• Control and data Evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

Can be sold as an individual component or as part of a complete stack

Specifications: 

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Noise: ± 0.75 x 10 -5 AU, at 254 nm
• Drift: 3 x 10-4AU/hr, at 254 nm
• Linearity: >2 AU upper limit
• Wavelength range: 190-600 nm
• Wavelength accuracy: ± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
• Wavelength bandwidth: 6.5 nm typical over whole wavelength range
• Maximum data rate: 55 Hz

Specifications: 

• Detection type: Double-beam photometer
• Light source: Deuterium lamp
• Noise: ± 0.75 x 10 -5 AU, at 254 nm
• Drift: 3 x 10-4AU/hr, at 254 nm
• Linearity: >2 AU upper limit
• Wavelength range: 190-600 nm
• Wavelength accuracy: ± 1 nm, self-calibration with deuterium lines, verification with holmium oxide filter
• Wavelength bandwidth: 6.5 nm typical over whole wavelength range
• Maximum data rate: 55 Hz

The Agilent 1200 Series G1315 Diode Array Detector is designed for the maximum optical performance. Flexible slit setting from fine bands to highest sensitivity, with settings of 1 nm the fine structure of benzene can be revealed - even at 0.7mAUFS. A broad slit of 8 or 16nm can be chosen to minimize baseline noise thus enhancing sensitivity. System specifications include:

Specifications:

• Wavelength range: 190-950 nm
• Light source: Deuterium and tungsten lamps
• Detection type: 1024 - element photodiode array
• Short term noise (ASTM) single & mult-wavelength: ± 1° x 10-5 AU at 254 and 750 nm
• Drift: 2° x 10-3 AU / hr at 254 nm
• Linear absorbance range: > 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 - 400 nm
• Diode width: < 1 nm
• Control and data evaluation: Agilent Chemstation for LC
• Slit width: 1, 2, 4, 8, 16 nm

Can be sold as an individual component or as part of a complete stack

Specifications:

• Detection type: 1024-element photodiode array
• Light source: Deuterium and tungsten lamps
• Wavelength range: 190 – 950 nm
• Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
• Drift: 2 × 10-3AU/hr at 254 nm
• Linear absorbance Range: 2 AU (upper limit)
• Wavelength accuracy: ± 1 nm
• Wavelength bunching: 1 – 400 nm
• Slit width: 1, 2, 4 , 8, 16 nm
• Diode width: < 1 nm
• Flow cells
  • Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
  • Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
  • High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
  • 500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
• Control and data Evaluation: Agilent ChemStation for LC
• Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

Can be sold as an individual component or as part of a complete stack

Features:

• Advanced temperature controlled detector optics ready to use within two hours of installation
• Automatic zero and automatic purge combined with a recycle valve for automatic solvent recycling allow uninterrupted operation
• Automatic light intensity control circuit to ensure the optimum performance of the optics
• Integrated diagnostics for efficient troubleshooting
• Built-in refractive index calibration
• Front access to valves and capillaries for easy maintenance
•  

Specifications:

• Detection type: Refractive Index
• Refractive index range: 1.00 – 1.75 RIU, calibrated
• Measurement range: +/- 600 x 10-6 RIU
• Optics temperature control: 5 ° C above ambient to 55 ° C
• Sample cell volume: 8uL
• Maximum pressure: 5 bar (0.5Mpa)
• Maximum flow rate: 5mL/minute
• Valves: Automatic purge and automatic solvent recycle
• Volumes: Inlet port to sample cell 62uL, inlet port to outlet port 590uL

Features:

The Agilent 1260 Infinity II Diode Array Detector WR offers multiple wavelengths and full spectral detection at up to120 Hz sampling rate, keeping up with the analysis speed of fast LC. Even at high data rates, the 1260 Infinity II DAD WR enables precise identification, quantification, and peak purity analysis at trace levels. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 12 analytical, preparative and SFC flow cells.

Specifications:

• Fast data acquisition - full spectral data acquisition rate of 120 Hz increases resolution and delivers fast, highly sensitive peak purity analysis and spectral confirmation – at trace levels.
• Highest sensitivity - dual lamp design allows analysis of wavelengths between190 to 950 nm.
• Simultaneous data acquisition - The diode array design enables simultaneous acquisition of up to eight compound-specific wavelengths for increased sensitivity and selectivity.
• Rapid optimization of sensitivity, linearity and spectral resolution-programmable slit (1 to 16 nm) provides optimum incident light conditions.
• Eliminates background interference- with reference wavelengths.
• Minimized short-term noise (< ± 7 µAU ASTM) - low noise front-end electronics and special flow cell design deliver lowest detection limits.
• Maximum flexibility, compatibility and investment protection – with a range of 12 analytical, preparative and SFC flow cells.

.

Features:

The detector is designed for highest optical performance, GLP compliance and easy maintenance. 

Specifications:

• Detection Type: 1024-element photodiode array
• Light Source: Deuterium and tungsten lamps The UV-lamp is equipped with RFID tag that holds lamp typical information.
• Data Rate: up to 80 Hz
• Wavelength Range: 190 – 950 nm
• Short Term: noise (ASTM) Single and Multi-Wavelength: < ± 0.7·10-5 AU at 254 and 750 nm
• Drift: < 0.9·10-3 AU/h at 254 nm 
• Linear Absorbance Range: > 2 AU (5 %) at 265 nm
• Wavelength Accuracy: ± 1 nm ,Self-calibration with deuterium lines, verification with holmium oxide filter
• Wavelength Bunching: 1 – 400 nm, Programmable in steps of 1 nm
• Slit Width: 1, 2, 4 , 8, 16 nm Programmable slit
• Diode Width: < 1 nm