Used Lab Equipment

Specifications:

• Chamber Material: Polished stainless-steel interior with coved corners
• CO2 Concentration Range: 0 to 20%
• CO2 Sensor Technology: IR
• Relative Humidity: Ambient to 95% at 37°C
• Temperature Range: 10° to 50°C
• Shelves: Stainless steel
• CO2 Concentration Control: IR Sensor
• Capacity: 6.5 cu.ft., 184L
• Electrical Requirements: 115V 50/60Hz

Specifications:

• Temperature Range: 5°C above ambient to 55°C
• Interior Volume: 6.5 cu. Ft
• Water Jacket Volume: 11.7 gal.

Specifications:             

• Capacity: 6.5 cu. ft. (184L)
• CO2 Concentration Range: 0 to 20%
• O2 Range: 1 to 20%
• Relative Humidity: Ambient to 95% at 37°C
• Humidity System: 3L stainless-steel pan
• Temperature Range: Ambient +5°C to 55°C
• Temperature Uniformity: ±0.2°C at 37°C
• Chamber: Polished stainless-steel interior with coved corners
• Interior D x W x H: 0 x 21.3 x 26.8 in. (50.8 x 54.1 x 68.1cm)
• Shelving: Stainless steel
• Exterior L x W x H: 25 x 26.0 x 39.5 in. (63.5 x 66.0 x 110.3cm)
• Port(s): Chamber thru-wall access port with filter; RS-485 interface (optional)
• Net Weight: 265 lb. (120.2kg)
• Shipping Weight: 324 lb. (147kg)

Specifications:

• Disinfection Time: 14 hours total cycle, 140°C

• CO2 Concentration Range: 0 to 20%

• CO2 Sensor Technology: IR

• Humidity Delivery: external reservoir

• Relative Humidity: Ambient to 95%, controlled

• Temperature Range: 5° to 50°C

• Capacity: 11.4 cu.ft., 322.8L

• Height Interior: 32.8 in.

• Depth Interior: 20.6 in.

• Width Interior: 28.8 in.

• Net Weight: 410 lb.

• Shelves: 5/22 [Supplied/Max.]

• Voltage: 115V

• Amperage: 11.5A

• Cabinet Material: 18-gauge, cold-rolled steel

• CO2 Concentration Control: ±0.1% at 5%

• Hertz: 50/60Hz

• Ports: Chamber thru-wall access port with filter

• Shelf Material: Perforated stainless steel

• Dimensions (D x W x H) Interior: 20.6 x 28.8 x 32.8 in.

Features:

This CO2 incubator is equipped with a high level of contamination control for high volume culturing. It is built with multiple advanced components including: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Specifications:

• Capacity: 11.4 cu.ft., 322.8L
• Temperature Range (Metric): Ambient +5° to 50°C
• Chamber Material: Polished stainless steel
• CO2 Concentration Range: 0 to 20%
• CO2 Sensor Technology: IR sensor
• Oxygen Control: Not Available
• Humidity Delivery: External humidity reservoir
• Relative Humidity: Ambient to 95%, controllable
• Electrical Requirements: 115V 50/60 Hz
• Dimensions (D x W x H) Interior: 20.6 x 28.8 x 32.8 in. (52.3 x 73.2 x 83.8cm)
• Dimensions (L x W x H) Exterior: 27 x 43 x 39.4 in. (68.6 x 109.2 x 100.2cm)
• Net Weight: 410 lb, 186kg

Features:

Steri-Cycle CO2 Incubators are designed, manufactured, and tested to provide two highly effective methods of contamination control. In addition to the 24 hour/day functioning of the patented HEPA (High Efficiency Particulate Air) Filter Airflow System, which provides Class 100 chamber air within 5 minutes, you now have the capability of periodically running a heat sterilization cycle that destroys all microbial life forms.

Thermo Forma's CO2 incubators also provide an unequaled combination of performance, convenience, and reliability. . Specially designed wrap-around heaters surround all sides of the chamber walls, combining with the directed airflow to provide extremely uniform chamber temperature. Units are also easy to setup and program, with an alphanumeric message center and constant temperature and CO2 displays

Specifications:

• Temperature Range: +5C above ambient to +50C
• Temperature Uniformity: +/-0.3C @ 37C
• Humidity System: 3.2 quart (3.0 liter) pan
• Humidity Range: Ambient to 95% @ 37C
• Interior Volume: 6.5 cu.ft. (184.1 liters)
• Interior W X H X F-B: 21.3 X 26.8 X 20.0 in

Specifications:

• Humidity Control
• Temperature Range: 0°C to 60°C
• Chamber Volume: 29 Cubic Feet / 821.2 Liters
• Temperature Uniforimity: ±0.3°C at 37°C
• Temperature Sensitiviy: ±0.1°C
• Chamber Dimensions (HxWxD):  60” x 31” x 27”
• Exterior Dimensions: (HxWxD):  88.5” x 38” x 32”
• Weight: 1040 LBS
• Capacity: 29 cu. ft. (821.2L)
• Voltage: 208/220V 60 Hz, 15.0A
• 4-wire power cord (including ground)
• NEMA 14-20P plug
• 6 solid stainless-steel shelves
• Exterior D x W x H: 32 x 38 x 88.5 in. (81.3 x 96.5 x 224.8cm)
• Interior D x W x H: 27 x 31 x 60 in. (68.6 x 78.7 x 152.4cm)

Broad Range of Features and Controls

• Wide temperature range of 0° to 60°C enhances the flexibility of the unit
• Relative humidity control via steam generator from above ambient to 95% at 37°C†
• Sophisticated digital controls
• Programmable ramp and soak cycles for temperature and RH†
• Durable cabinets feature true laminar airflow through side plenums for extremely tight uniformity
• Phenolic-coated evaporator for use in applications that create corrosive byproducts
• Manual control of defrost and refrigeration cycles
• Visible/audible safety alarms alert to over- and undertemperature conditions, deviation of humidity from set parameters (except Model 3920)

Durable Construction

• Cold-rolled steel, powder-coated cabinet
• 0 in. (5.1cm) thick, CFC-free, foamed-in-place polyurethane insulation
• Stainless-steel interior
• Solid stainless-steel adjustable shelves
• Directed horizontal airflow system for excellent uniformity
• Locking swivel casters ensure easy mobility during installation and cleaning
• Leveling feet provide stability and added safety in the lab

Features:

• Wide temperature range of 0° to 60°C that enhances the flexibility of the unit
• Relative humidity control via steam generator from above ambient to 95% at 37°C (not available w/Cat. No. 3920)
• Sophisticated digital controls
• Programmable ramp and soak cycles for temperature and RH†
• Durable cabinets with true laminar airflow through side plenums for extremely tight uniformity
• Phenolic-coated evaporator for use in applications that create corrosive byproducts
• Manual control of defrost and refrigeration cycles
• Visible/audible safety alarms alert to over- and under temperature conditions, deviation of humidity from set parameters (except Model 3920)

Specifications:

• Amperage: 15 A
• Capacity (English): 11 cu. ft.
• Certifications/Compliance: ICH, FDA, TAPPI, ASTM™
• Depth Interior: 27 in (68.8cm)
• Depth: 32 in (81.3cm)
• Capacity: 311.5 L
• Chamber Material: Stainless Steel
• Dimensions (D x W x H) Interior: 27 x 31 x 24 in. (68.6 x 78.7 x 60.9 cm)
• Temperature Range (Metric): 0°C to 60°C
• Material: Powder-coated Cold Rolled Steel
• Display: Digital Dual LED
• Electrical Requirements: 208/220 V, 60 Hz
• Frequency: 60 Hz
• Height: 51.5 in (130.8cm)
• Height Interior: 24 in (60.9cm)
• Humidity Control: Microprocessor, PID
• Humidity Display: Digital, dual LED (direct set and read in % RH)
• Humidity Accuracy: ±5.0%
• Humidity Resolution: 0.01
• Humidity Sensor: Bulk polymer
• Humidity Source: Steam generator; initial fill approx. 1 qt. (1L)
• Input Water Pressure: Water Inlet Gravity to 40psi
• No. of Shelves: 3 supplied/11 max.
• Programmability: Temperature ramp and soak, up to 24 steps
• Refrigerant: CFC-free, R134A
• Temperature Accuracy: ±0.1 at 25° to 37°C
• Temperature Resolution: 0.1°C
• Temperature Sensor: RTD
• Temperature Uniformity: ±0.3 at 25° to 37°C
• Voltage: 208/220 V
• Water Consumption: 0.25 gal./hr. input water volume
• Water Resistivity: 50kilohm to 1megohm resistance
• Width: 38 in (96.5cm)
• Width Interior: 31 in (78.7cm)
• Lighting: Optional Interior Lighting
• Type: Environmental Chamber

Specifications:

• Humidity Control
• Temperature Range: 0°C to 60°C
• Chamber Volume: 29 Cubic Feet / 821.2 Liters
• Temperature Uniforimity: ±0.3°C at 37°C
• Temperature Sensitiviy: ±0.1°C
• Chamber Dimensions (HxWxD):  60” x 31” x 27”
• Exterior Dimensions: (HxWxD):  88.5” x 38” x 32”
• Weight: 1040 LBS
• Capacity: 29 cu. ft. (821.2L)
• Voltage: 208/220V 60 Hz, 15.0A
• 4-wire power cord (including ground)
• NEMA 14-20P plug
• 6 solid stainless-steel shelves
• Exterior D x W x H: 32 x 38 x 88.5 in. (81.3 x 96.5 x 224.8cm)
• Interior D x W x H: 27 x 31 x 60 in. (68.6 x 78.7 x 152.4cm)

Broad Range of Features and Controls

• Wide temperature range of 0° to 60°C enhances the flexibility of the unit
• Relative humidity control via steam generator from above ambient to 95% at 37°C†
• Sophisticated digital controls
• Programmable ramp and soak cycles for temperature and RH†
• Durable cabinets feature true laminar airflow through side plenums for extremely tight uniformity
• Phenolic-coated evaporator for use in applications that create corrosive byproducts
• Manual control of defrost and refrigeration cycles
• Visible/audible safety alarms alert to over- and undertemperature conditions, deviation of humidity from set parameters (except Model 3920)

Durable Construction

• Cold-rolled steel, powder-coated cabinet
• 0 in. (5.1cm) thick, CFC-free, foamed-in-place polyurethane insulation
• Stainless-steel interior
• Solid stainless-steel adjustable shelves
• Directed horizontal airflow system for excellent uniformity
• Locking swivel casters ensure easy mobility during installation and cleaning
• Leveling feet provide stability and added safety in the lab

Specifications:

• Humidity Control
• Temperature Range: 0°C to 60°C
• Chamber Volume: 29 Cubic Feet / 821.2 Liters
• Temperature Uniforimity: ±0.3°C at 37°C
• Temperature Sensitiviy: ±0.1°C
• Chamber Dimensions (HxWxD):  60” x 31” x 27”
• Exterior Dimensions: (HxWxD):  88.5” x 38” x 32”
• Weight: 1040 LBS
• Capacity: 29 cu. ft. (821.2L)
• Voltage: 208/220V 60 Hz, 15.0A
• 4-wire power cord (including ground)
• NEMA 14-20P plug
• 6 solid stainless-steel shelves
• Exterior D x W x H: 32 x 38 x 88.5 in. (81.3 x 96.5 x 224.8cm)
• Interior D x W x H: 27 x 31 x 60 in. (68.6 x 78.7 x 152.4cm)

Broad Range of Features and Controls

• Wide temperature range of 0° to 60°C enhances the flexibility of the unit
• Relative humidity control via steam generator from above ambient to 95% at 37°C†
• Sophisticated digital controls
• Programmable ramp and soak cycles for temperature and RH†
• Durable cabinets feature true laminar airflow through side plenums for extremely tight uniformity
• Phenolic-coated evaporator for use in applications that create corrosive byproducts
• Manual control of defrost and refrigeration cycles
• Visible/audible safety alarms alert to over- and undertemperature conditions, deviation of humidity from set parameters (except Model 3920)

Durable Construction

• Cold-rolled steel, powder-coated cabinet
• 0 in. (5.1cm) thick, CFC-free, foamed-in-place polyurethane insulation
• Stainless-steel interior
• Solid stainless-steel adjustable shelves
• Directed horizontal airflow system for excellent uniformity
• Locking swivel casters ensure easy mobility during installation and cleaning
• Leveling feet provide stability and added safety in the lab

Specifications

• Temperature Range: 5C above ambient to +60C
• Temperature Uniformity: ±0.3C at 37C
• Interior Construction: Shiny stainless steel
• Interior Volume: 29 cu.ft. (821.2 liters)
• Interior WxHxD: 31.0" X 60.0" X 27.0" (78.7cm. X 152.4cm. X 68.6cm.)
• Exterior WxHxD: 38.0" X 80.0" X 33.0" (96.5cm. X 203.2cm. X 83.8cm.)
• Humidity System: 4 gal. (15.1liter) tank
• Humidity Ranges: Off, med. >80%, high >90%
• CO2 Sensor: Thermal Conductivity (T/C)
• CO2 Range: 0-20%

Specifications

• Temperature Range: 5C above ambient to +60C
• Temperature Uniformity: ±0.3C at 37C
• Interior Construction: Shiny stainless steel
• Interior Volume: 29 cu.ft. (821.2 liters)
• Interior WxHxD: 31.0" X 60.0" X 27.0" (78.7cm. X 152.4cm. X 68.6cm.)
• Exterior WxHxD: 38.0" X 80.0" X 33.0" (96.5cm. X 203.2cm. X 83.8cm.)
• Humidity System: 4 gal. (15.1liter) tank
• Humidity Ranges: Off, med. >80%, high >90%
• CO2 Sensor: Thermal Conductivity (T/C)
• CO2 Range: 0-20%

Specifications

• Temperature Range: 5C above ambient to +60C
• Temperature Uniformity: ±0.3C at 37C
• Interior Construction: Shiny stainless steel
• Interior Volume: 29 cu.ft. (821.2 liters)
• Interior WxHxD: 31.0" X 60.0" X 27.0" (78.7cm. X 152.4cm. X 68.6cm.)
• Exterior WxHxD: 38.0" X 80.0" X 33.0" (96.5cm. X 203.2cm. X 83.8cm.)
• Humidity System: 4 gal. (15.1liter) tank
• Humidity Ranges: Off, med. >80%, high >90%
• CO2 Sensor: Thermal Conductivity (T/C)
• CO2 Range: 0-20%

Dual IR stacked water-jacketed CO2 incubator. Microprocessor control maintains and displays temperature and CO2 levels with exceptional precision, stability & uniformity. Patented recovery system with internal air heater and fan restores set-point conditions up to 3 times faster than conventional water-jacketed CO2 incubators. Insulated triple-wall construction and low-power heater in the outer doors keep thermal loss to a minimum while minimizing condensation on the inner glass doors.

Specifications:

• Chamber Volume: 5.4 cubic feet

• Internal Dimensions: 43.9 x 44.5 x 63.5 cm

• CO2 Range: 0 - 20%

• Temperature Uniformity: +/- 0.25°C

• External Dimensions: 68.6 x 62.3 x 85.7 cm

• Power Requirements: 120V, 50/60Hz, 9.4A. 1100W

Description:

The Napco microprocessor controlled CO2 incubator maintains and displays chamber temperature and CO2 levels with exceptional precision, stability and uniformity. Features front panel calibration and diagnostics, software lock to prevent inadvertent changing of set-point conditions, audio-visual alarms, low water indicator, automatic shuttle valve to switch to a second CO2 tank when the first is empty, rear access port and auxiliary power outlet and over-temperature safety switch. Chamber is 5.4 cu. ft. The temperature range is 5°C above ambient to 50°C±0.1°C. CO2 range is 0-20%.

Specifications:

• Dimensions (W x D x H): 24.5” x 29” x 36”
• Electrical Requirements: 115 V, 50/60 Hz, 9 A, 1040 W