Used Lab Equipment

Description:

With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
Built-in PID microprocessor-based controller for close uniformity with set temperatures
Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
Tempered glass inner door to view samples
Temperature recovery is within two minutes
Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
5-amp electrical outlet to support other apparatus

Specifications:

Temperature range: 5 to 75°C
Capacity: 3.8 cu ft, 96.3L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 19 in.
Exterior Dimensions: 26 x 23.5 x 33 in.

Description:

Designed to provide a clean chamber with removable shelves and unique miter-coved corners that can be easily decontaminated. Continuous chamber circulation through HEPA filter. 3-digit LED display for temperature and CO2. Microprocessor based PID temperature control with over-temperature protection. Large 20 gallon water jacket.

Specifications:

• Temperature Range: 18°C to 50°C
• CO2 Range: 0 - 20%
• CO2 Control: 0.1%
• CO2 Uniformity: ±0.25%
• Humidity Range: Ambient to 98%
• Capacity: 5.1 cu. ft (145.5 L)
• Overall Dimensions (W x H x D): 29.6” x 23.5” x 35.5” (75 x 59.5 x 92 cm)
• Weight: 231.5 lbs. (105 kg)
• Electrical: 120 V, 800 W, 6.7 amps

This Fisher Scientific Isotemp 655D gravity-convection incubator has digital readout and steady, unobstructed airflow and efficient heating. Designed for drying & staining of slides, tissue culture work, incubation of antibody tests, curing, pharmaceutical stability tests, microbiological determinations, crystallization studies, incubation of hydroxy-steroids and similar applications. Has a tight fitting, transparent tempered inner glass door to allow you view specimens without disturbing chamber temperature.

Specifications:

• Temperature Range: 30°C - 60°C
• Temperature Uniformity:+/- 1.5°C
• Ventilation Rate:12 exchanges/hour
• Chamber Capacity:5 cubic feet
• Dimensions:20 x 24 x 20 in
• Power Requirements: 115V, 20.A

Features:

Fisher Scientific Isotemp low temperature incubators are an ideal choice for incubation above or below ambient temperature. Low temperature, refrigerated incubators are suited to fit your application needs for BOD (biochemical oxygen demand) waste water testing, food, beverage and agricultural testing, pharmaceutical research, microbiology, yeast growth and more.

Specifications:

• Voltage: 115V
• Frequency: 60Hz

Features:

This digital dry bath offers a range of configurations. It has a max temperature of 130°C and is suitable for basic to advanced applications. It is equipped with a timer which allows the user to accurately monitor the heating time.

Specifications:

• Temperature Range (Metric): Ambient +5° to 130°C (Ambient at 25°C)
• Temperature Uniformity: ≤ ± 1°C
• Temperature Accuracy: ≤ ± 0.5°C
• Heating Rate: ≤ 20 min. 30° to 130°C
• Voltage: 100-120V
• Hertz: 50/60
• Dimensions (L x W x H): 318 x 200 x 100mm (12.5 x 7.9 x 3.9″)
• Controller Type: PID digital
• Max. Relative Humidity: ≤ 80%
• Timer Range: 0 to 99:59 min or continuous

These accurate and reliable chambers are ideal for long-term high temperature and relative humidity (RH) testing. Designed to provide a wide range of environments, these units are suitable for both industrial and biotechnology specification testing, specifically continuous-duty projects.  All models are equipped with a gentle horizontal air flow system, which ensures stable, top-to-bottom temperature and RH uniformity. Low temperature models 9005L and 9010L feature CFC-free refrigerant. Relative humidity range may vary depending on temperature set point.  Digitally set, microprocessor temperature and humidity controllers allow precise setting with direct digital read-out in degrees and percentage RH.  The over-temperature safety control prevents possible damage to samples or equipment. A vapor generator compresses moisture and injects it into the chamber to provide controlled humidification. Automatic water level control maintains liquid level in humidity reservoir. Pressure coupling allows for easy hook-up of in-line plumbing or a carboy of distilled water. All units feature interior drain.

Specifications:

• Temp range: 40 to 70°C
• Capacity: 9 cu ft.
• Humidity range: 5% above ambient to 95% RH.
• Inside dimensions: 30"W x 20"D x 30"H.
• Interior: Stainless steel.
• Shelves: 2 shelves

This VWR dry bath/incubator is a multi-purpose unit ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a variety of other laboratory procedures. These high wattage, constant-temperature block heaters are economical and versatile. Requires minimum bench space and features convenient front-mounted temperature adjustment knobs providing high and low temperature control. Accepts separate interchangeable modular blocks (can be purchased separately), which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block contains a thermometer well, and features close tube-and-block contact for maximum heat retention.

Specifications:

• Temperature Range:5° above ambient to 150°C
• Temperature Stability:±2°C
• Temperature Uniformity: ±5°C
  

Features:

This VWR dry bath/incubator is a multi-purpose unit ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a variety of other laboratory procedures. These high wattage, constant-temperature block heaters are economical and versatile. Requires minimum bench space and features convenient front-mounted temperature adjustment knobs providing high and low temperature control. Accepts separate interchangeable modular blocks (can be purchased separately), which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block contains a thermometer well, and features close tube-and-block contact for maximum heat retention.

Specifications:

Temperature Range: 5° above ambient to 150°C

Temperature Stability: ±2°C

Temperature Uniformity: ±5°C

Labnet's Digital Dry Baths are useful for a variety of applications in molecular biology, histology, clinical, environmental and industrial laboratories. Although the price of these baths is comparable to analog models, they feature microprocessor control and digital setting/display of temperature.

Specifications:

• Temperature Range: Ambient to +5°C to 150°C
• Temperature Resolution: 1°C
• Temperature Uniformity: +/- 0.2°C
• Temperature Accuracy: +/- 0.3°C
• Dimensions: 20 x 26.5 x 8.3 cm
• Weight:8 lb/2.2 kg
• Power Requirements: 230V or 120V, 50/60Hz

The Bellco BG-927 is an upright CO2 incubator with the storage capacity and temperature range for perfect cell cultivation and growth. This Bellco CO2 incubator has a microprocessor temperature control, infrared CO2 control, and a digital set point and temperature display. It also has independent over-temp protection.

Specifications:

• Interior Dimensions: 35 x 26 x 76 in

• Exterior Dimensions: 43 x 35 x 87 in

• Power Requirements: 115V, 60Hz, 12A

• Temperature Range: Ambient +5°C to 70°C

• Temperature Sensitivity: +/- 0.01 °C

• Temperature Uniformity: +/- 0.25 °C at 37°C

• CO2 Range: 0 - 20%, PSI = 5 to 40

• CO2 Uniformity: +/- 0/1% at 5% CO2

• Capacity: 1133 L

• Shelf Dimensions: 34 x 24 in